Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy

The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)

If you're seeking to eradicate vacuum leaks and enhance the overall airflow of your intake system, look no further than this comprehensive kit.

The M52TU/M54 air intake boots have gained notoriety for their tendency to crack, resulting in vacuum leaks, triggering check engine lights, and causing various performance issues. The soft rubber boots are constantly exposed to high temperatures from the engine, leading them to become brittle and prone to cracking over time. These cracks permit unmeasured air intake beyond the airflow meter, resulting in rough idling, sputtering, or even engine stalls.

This kit offers a solution by providing both lower and upper air intake boots/hoses for a complete repair. Additionally, as a bonus, the kit includes an ECS Exact-Fit High-Flow Air Filter to optimize your vehicle's intake tract.

Introducing the Turner Motorsport Bavarian Autosport Idle Control Valve for BMW M50, M52, and M54 engines. This crucial component, situated in the intake system, addresses common idle issues experienced by BMW owners. Enhance your BMW's performance and ensure smooth idling with this Idle Control Valve.

• Turner Motorsport's Bavarian Autosport Idle Control Valve for M50, M52, M54 engines.
• Targets and resolves common idle issues.
• Promotes smooth and consistent idling.
• Essential for maintaining optimal engine performance.
• Reliable component for BMW enthusiasts.

Upgrade your BMW's idle control system with the Turner Motorsport Bavarian Autosport Idle Control Valve, ensuring a seamless driving experience.

BMW Intake Air Adjustment Unit/DISA Valve | E39 E46 Z3 - M52 2.5L / 2.8L Engine is designed to regulate airflow into the engine, optimizing performance and fuel efficiency. A faulty DISA valve can cause a variety of issues such as loud noises from the engine bay, hesitation at low RPM, rough idling, and lean codes. If you notice any unusual noise from the valve, it’s important to replace it immediately to prevent further damage. The pin holding the flap can become dislodged and sucked into the motor, causing potentially severe engine damage.

• Ensures proper airflow into the engine for smoother performance
• Fixes issues such as rough idle, hesitation, and lean codes
• Prevents costly engine damage by replacing a faulty DISA valve
• Easy installation with just four bolts to remove and replace the valve
• Compatible with BMW E39, E46, and Z3 models with M52 2.5L / 2.8L engines
• Durable design for long-lasting, reliable performance

Replace your faulty DISA valve to restore engine performance and prevent further damage with this easy-to-install, high-quality replacement part.

This is a high quality replacment OEM VDO Mass Air Sensor.The MAF controls the amount of fuel that goes through the injectors based on the volume of air coming through the intake. If your vehicle is giving you a MAF code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails completely, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAF is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAF needs replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

OEM replacement for BMW part # 13627567451 and 13621438871

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Intrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Complete Application List:
2001-2002 E46 330i, 330Ci
2001-2005 E46 330Xi
2001-2003 E39 530i
2001-2006 E53 X5 3.0
2001-2002 Z3 3.0

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series: 318i 318is 318ic 318ti 1992-1998
Z3 : Z3 1.9

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

• Constructed with 100% polyurethane
• Two layers of progressively finer mesh synthetic media
• Washable and reusable for multiple cleaning cycles
• Excellent dust-holding capacity for a longer service cycle between cleanings
• Integrated urethane bump seal insures a tight, no leak seal
• Outflows stock paper filter for improved horsepower and torque