BMW Tools & Specialty Equipment for BMW E52 Z8 S62 5.0L

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Discover the precision and durability of our 13 Piece XZN Triple Square Driver Set. Each driver is ingeniously designed as a 2-piece unit, seamlessly integrating the bit and socket for effortless use. Crafted from top-tier S2 Steel, these standard-length drivers provide optimal reach and grip, catering to a diverse range of tasks.

Spanning from 4mm to 18mm, these drivers are your versatile solution, perfect for automotive repairs or intricate DIY projects. Organized in a foam padding, they stay secure and readily available whenever you need them.

With our commitment to quality, these drivers are backed by our LIFETIME REPLACEMENT program, ensuring your confidence in every task. Upgrade your toolkit today and experience the ease of working with high-quality tools tailored to meet your demands.

Includes:

• Foam casing
• 4 mm
• 5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm
• 16 mm
• 18 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

• 17mm, 19mm and 21mm Sockets included in a blow molded case.
• All sockets are 1/2" drive
• 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.