Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW E30 3 Series Front Sway Bar Bushing (18.5mm) is a key suspension component designed for the legendary E30 models produced between 1984 and 1991. These bushings are integral to the performance of the front sway bar, helping to enhance stability and handling during cornering.
Designed for 18.5mm Sway Bars:
Functionality:
Material Choices:
Performance Enhancement:
Compatibility:
Installation Process:
In summary, the BMW E30 3 Series Front Sway Bar Bushing (18.5mm) is a vital component for maintaining the performance and handling of these classic BMWs. Whether replacing worn bushings or upgrading to polyurethane for better durability and performance, ensuring that these components are in top condition is essential for enjoying the renowned driving experience of the E30.
Product Overview: Powerflex Black Series bushings are engineered for high-performance applications, providing superior handling characteristics for the BMW E38 7 Series. These bushings are ideal for track use or spirited driving, delivering enhanced stiffness and reduced body roll.
Features:
High-Density Polyurethane:
Precision Fit:
Reduced Flex:
Durability:
Enhanced Feedback:
Easy Installation:
The Powerflex Front Lower Control Arm Rear Bushing for the BMW E36, E30, Z3, and Z1, featuring an aluminum shell (centered), is a high-performance component designed to improve the vehicle's front suspension dynamics. By replacing the stock rubber bushings with this robust polyurethane and aluminum design, drivers can experience enhanced handling, stability, and durability.
Increased Durability: The aluminum shell enhances the structural integrity of the bushing, making it more resistant to wear and deformation compared to traditional rubber bushings. This durability ensures long-lasting performance, even under demanding driving conditions.
Enhanced Handling Performance: The firmer polyurethane material reduces unwanted flex and movement in the control arm, leading to improved alignment and stability. This results in better cornering ability and overall handling, allowing for a more confident driving experience.
Superior Feedback and Responsiveness: By minimizing unwanted suspension movement, these bushings provide improved steering feedback, allowing drivers to feel more connected to the road. This responsiveness translates to better control during cornering and enhanced confidence during spirited driving.
Easy Installation: Specifically designed for the BMW E36, E30, Z3, and Z1 models, these bushings are a direct replacement for the factory components. The installation is straightforward, requiring no modifications, making it a user-friendly upgrade for both professionals and DIY enthusiasts.
Versatile Applications: Suitable for a wide range of driving styles, these bushings excel in both daily driving and performance scenarios. They help optimize suspension geometry, enhancing tire contact with the road and improving overall handling capabilities.
This upgrade is ideal for BMW E36, E30, Z3, and Z1 owners looking to enhance their vehicle’s front suspension performance and longevity. The Powerflex Front Lower Control Arm Rear Bushing with an aluminum shell offers a reliable solution for improving handling, stability, and driving enjoyment, making it a perfect choice for enthusiasts who demand more from their vehicles.
The Powerflex Black Series Front Sway Bar Bushing (22 mm) for the BMW E21 is a high-performance suspension upgrade designed for enthusiasts seeking maximum handling precision and durability. Made from Powerflex’s toughest polyurethane compound, these bushings are ideal for motorsport and track use, providing significantly reduced deflection compared to stock rubber bushings.
Whether you're pushing your BMW E21 on the track or just looking to sharpen its handling for spirited driving, these Powerflex Black Series bushings offer the performance, durability, and precision needed to get the most out of your suspension setup.
For a BMW X3 (2003-2010), if you're looking for front anti-roll bar bushings with a 22.5mm diameter, one well-regarded aftermarket option is Powerflex. Powerflex specializes in high-quality polyurethane bushings, which are more durable than traditional rubber bushings. These bushings help improve handling by reducing unwanted flex in the suspension components.
Here’s what you should consider when getting Powerflex bushings for your BMW X3:
Material: Powerflex bushings are made from polyurethane, which offers better resistance to wear, deformation, and harsh conditions compared to OEM rubber.
Fitment: Ensure that the 22.5mm size matches the diameter of your front anti-roll bar for your specific BMW X3 variant. This size typically fits certain versions of the 2003-2010 X3 models, but it’s always good to double-check with your specific vehicle's specifications.
Improved Handling: Replacing your worn-out bushings with Powerflex ones can result in sharper handling and less body roll, especially during cornering.
These bushings are typically sold as a kit with two bushings (one for each side of the anti-roll bar), and installation may require some mechanical experience or a professional.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1985 - 1991 E30 M3
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i
2003 - 2010 E61 Touring 530xi
2004 - 2010 E63 6 Series Coupe 645Ci 650i
2004 - 2010 E64 Convertible 645Ci 650i
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1995 - 2001 E38 Sedan 740i 740iL 750i 750iL
BMW E46 M3 Performance Polyurethane Bushing Kit enhances your vehicle's handling and performance significantly. This comprehensive kit from Powerflex includes every bushing needed for the E46 M3 coupe, optimizing suspension dynamics and drivetrain control. Experience the true potential of your BMW's suspension and feel the power transfer more efficiently with this essential upgrade.
Powerflex, Europe's top suspension bushing manufacturer, utilizes advanced polyurethane materials and precise manufacturing techniques to ensure superior performance and durability. Their products are backed by a lifetime warranty to the original purchaser, demonstrating their commitment to quality and reliability.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1995 - 2001 E38 Sedan 740i 740iL 750i 750iL