click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. CATuned Big Brake Kits
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. TC Kline Racing Coil Overs
  16. Chassis Reinforcement Kits & Parts
  17. Sway Bar Kits
  18. Sway Bar Links & Sway Bar Parts
  19. Camber / Caster Kits
  20. Strut Braces & Stress Bars
  21. Control Arm Replacements & Upgrades
  22. Suspension Bushings & Mounts
  23. Wheel Bearings & Hub Assemblies
  24. Steering Racks & Power Steering Pumps
  25. Tie Rods & Steering Parts
  26. Coil Over Spring Hardware
  27. CATuned Coilover Kits
  28. AC Schnitzer Suspension Kits
  29. Sachs Performance Coil Over Suspension
  30. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Alpina Alloy Wheels
  9. Original BMW Wheels and Wheel Upgrades
  10. Turner Motorsport Wheel Spacers
  11. ECS Tuning Wheel Spacers
  12. H&R Wheel Spacers
  13. Wheel Bolts, Wheel Studs and Nuts
  14. Wheel Emblems, Caps, and Accessories
  15. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW Seats & Seat Accessories

BMW Seats & Seat Accessories Whether you're building a track-only speed machine, show car, or ultra-serious street ride the seats can make an awesome upgrade. Aside from the obvious safety considerations with a seat, there are few upgrades that can have more of an impact in your driving experience. Sport or Race seats envelope and grip the driver's body, holding him/her in place even under extreme driving situations. When strapped into a seat with the appropriate harnesses you can become an integrated part of the car. Without the sliding around of stock seats you can have greater confidance and focus on the act of driving. Turner Motorsport is an authorized Recaro dealer and we use them in all of our racecars and high-level tuner project cars. We offer the full range of Recaro tuner and racing seats with mounts and adapters and other accessories.
For accurate results, specify your model below.
Brey-Krause R-9262 Seat mount - priced each

The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9262 Features

  • Fits seats between 385mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9262
Price: $179.95 (USD) 
Quantity:   
OMP Racing Seat Mounting Bracket - E46 Sedan

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

Part #: HC/121
Price: $140.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP Steel low brackets - 16 holes | Black Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm
Part #: HC/922
Price: $89.00 (USD) 
Quantity:   
Brey-Krause R-9256 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9256 Features

  • Fits seats between 443mm to 460mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9256
Price: $179.95 (USD) 
Quantity:   
Part #: FULLSEAT
Price: $1495.00 (USD) 
Quantity:   
Recaro Pole Position Race Seat Famous Recaro brand quality in an entry level seat! The Recaro Pole Position is a fixed-back fiberglass shell with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat is best-suited for small-medium sized drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:
Shell Materialfiberglass-reinforced plastic
fabric materialvelour
fabric colorsblack, blue, red
logo colorwhite or black depending on seat color
harness guidesYes for 4, 5, or 6 point
seat mountside mount, not included
slidersnot included
chassis mountsnot included
Part #: TMS21541
Price: $1098.00 (USD) 
OMP WRC-R Fiberglass Racing Seat | Black

This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights. 

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/773E
Price: $799.00 (USD) 
Quantity:   
Brey Krause Fire Extinguisher Mount - Passenger

Allows mounting of a fire extinguisher to factory seats, due to the way the bracket mounts it moves with the seat so no leg room is lost. 

*For vehicles with manual seats* 

Part #: R-2211
Price: $89.25 (USD) 
Quantity:   
OMP Universal brackets | Silver Universal aluminium brackets for seats with side attachments for Renault R5 >72<84
Part #: HC/666
Price: $89.00 (USD) 
Quantity:   
OMP Racing Seat Mounting Bracket - driver - E46 Coupes

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Coupe

Part #: HC/007
Price: $140.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP Racing Seat Mounting Bracket - E82 E88

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E82 and E88. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
2008-2011 E82/E88 BMW 1 Series

Part #: HC139
Price: $140.00 (USD) 
Quantity:   
Brey Krause Lap Belt mount set - outer side Pair of Outside Lap Belt Mounts for use with harness bar R-1203
Part #: R-9203
Price: $73.50 (USD) 
Quantity:   
OMP Racing Seat Mounting Bracket - E30

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E30. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1982-1991 E30 BMW 3 Series

Part #: HC/034
Price: $140.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP Sand Racing Steering Wheel - 380mm | Black Polyurethane

Sporty 3-spoke OMP Sand steering wheel in 380mm diameter. Black anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/2031
Price: $169.00 (USD) 
Quantity:   
Brey Krause R-9221 Seat mount - passenger

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9221 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9221
Price: $179.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Side Mounts - Recaro Seats - FIA Approved Racing and aftermarket seats require a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included. Choose from standard steel or light weigt aluminum.
Part #: 7207xxxx
Price: $125.00 (USD) 
Harness Bar - E36 Coupe

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

 

*For coupe models only*

Part #: R-1201
Price: $504.00 (USD) 
Quantity:   
OMP TRS-E XL: Tubolar Racing Seat | Black

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: HA/781E
Price: $409.00 (USD) 
Quantity:   
Agency Power Bolt-In Harness Bar - F22 F87

The Agency Power BMW 2-Series harness bar was designed for an easy installation, provide an OEM fit that does not require cutting, and extreme durability. Constructed of 1018 steel with .120 wall thickness, the sections of tube are then precision welded and mandrel bent. Each harness bar features harness locators behind the driver and passenger seats to prevent the harnesses from sliding on the top tube.

Agency Power Industries LLC was developed out of the need to provide quality, functional, and fashionable racing products. Starting from sway bar endlinks for the  Subaru  WRX back in 2003, Agency Power now has and indepth number of parts for cars ranging from  Porsche ,  BMW ,  Ferrari,   Subaru ,  Mitsubishi ,  Nissan  and many more. Based out of Gilbert, Arizona, Agency Power has established itself as one the core aftermarket companies for niche tuner products. Agency Power is constantly developing new functional and race proven products. With dealers worldwide, the AP brand is recognized and trusted. 

Part #: AP-F22-500
Price: $700.00 (USD) 
Quantity:   
OMP Steel tall brackets | Black Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick
Part #: HC/731E
Price: $79.00 (USD) 
Quantity:   
Brey Krause Harness Bar - E92 This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Part #: R-1203
Price: $729.75 (USD) 
Quantity:   
OMP Alluminum tall brackets - 36 holes | Black Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm
Part #: HC/925
Price: $185.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Seat Floor Adapters with Sliders - E39 - Recaro OEM Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

Sold per seat. Choose Left or Right in the options list below.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
Part #: TMS176961
Price: $425.00 (USD) 
Racing Seat Mounting Bracket - Passenger Side

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1999-2005 BMW E46 Sedan

Part #: HC/121/PA
Price: $140.00 (USD) 
Quantity:   
Brey-Krause R-9245 Seat mount - Passenger

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9245 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9245
Price: $179.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP HTE-R Carbon Fiber XL Racing Seat -- Black

OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

XL version for taller drivers.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Part #: HA/779E
Price: $2649.00 (USD) 
Quantity:   
Side Mounts - Macht Schnell for Recaro Seats Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats.
Part #: 79.20.110B
Price: $125.00 (USD) 
Racing Seat Belt Harness Retaining Guide Collars (Pair) These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
Part #: TIN9903150
Price: $39.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Odometer Gears Green Passenger Seat Recline Gear - E36 BMW (06/1997-1999)

Does your power seat motor no longer recline your seat but you can hear it making noise? Chances are its the gear that attaches directly to the motors shaft itself. This is a common problem that BMW does not provide an individual replacement for. 

Luckily Odometer Gears is here to answer the calls of the people and provides us with their upgraded great seat recline gear. This is made to withstand wear and tear greater than the stock gear and is available separately, preventing you from needing to buy a costly new motor.

Fits the following vehicles:
06/1997-1999 E36 BMW All Models with a power seats

Part #: OG018
Price: $40.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP WRC Racing Seat Split Seat Cushion | Black Designed for the WRC racing seats from OMP, these cushions will add tons of comfort and fit perfectly, attaching with simple Velcro strips.  These 2 individual  cushions are both covered in the AIRTEX® material for additional breathability.
Part #: HB/700
Price: $60.00 (USD) 
Quantity:   
Brey-Krause R-9280 Seat mount - priced each

The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9285 Features

  • Fits seats between 429mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Part #: R-9280
Price: $179.95 (USD) 
Quantity:   
Seatbelt 3-point Receptacle - Macht Schnell Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Part #: 79.12.12X
Price: $112.50 (USD) 
$125 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
HARD Motorsport Rear Seat Bulkhead Delete Panel - BMW E46 Coupe

HARD Motorsport Rear "Seat Delete" Bulkhead filler panel is perfect for sealing your cabin from the trunk when gutting your vehicles of heavy rear seats. Fitting most applications, this panel is the closest option to a drop in part you can find. For vehicles with safety cages, only a small bit of modification is necessary for perfect fitment.

Product Features:

  • .040 Laser Cut Aluminum - Light weight
  • Powdercoated finish
  • Bead rolled for strength
  • Direct fitment for BMW 2 door Coupe.

 

Fits the following vehicles:

E46 BMW All coupe sub-models including the M3

Part #: HARD.E46.RSEAT
Price: $168.95 (USD) 
Free Shipping Free Shipping
Quantity:   
OMP Racing Seat Mounting Bracket - E21

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E21. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1975-1983 E21 BMW 3 Series

Part #: HC/128
Price: $140.00 (USD) 
Quantity:   
Brey-Krause R-9244 Seat mount - Driver

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9244 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9244
Price: $179.95 (USD) 
Quantity:   
Part #: F8XCFSEATCVR
Price: $799.95 (USD) 
Quantity:   
Recaro Profi Race Seat The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

Seat Specs:
Shell Materialfiberglass-reinforced plastic
fabric materialvelour
fabric colorsblack, red
logo colorwhite or black depending on seat color
harness guidesYes for 4, 5, or 6 point
seat mountside mount, not included
slidersnot included
chassis mountsnot included
Part #: RECARO-PROFI
Price: $999.00 (USD) 
OMP Racing Seat Head cushion for WRC and HRC Seats | Black This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Part #: HB/699
Price: $60.00 (USD) 
Quantity:   
OMP Steel tall brackets - 36 holes | Black Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm
Part #: HC/923
Price: $99.00 (USD) 
Quantity:   
OMP Steel low brackets | Black Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.
Part #: HC/733E
Price: $69.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
RKP Rear Seat Delete - F87 M2

Shed valuable weight with this rear seat delete for your M2. This delete kit flows seamlessly with the factory interior, allowing you to save weight without sacrificing the integrity of your beautiful interior.

This product fits the following BMWs:
2016+ F87 M2

Part #: RKP-F87-M2-RSD
Price: $4995.00 (USD) 
Quantity:   
Brey-Krause R-9254 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9254 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9254
Price: $179.95 (USD) 
Quantity:   
Brey-Krause R-9260 Seat mount - priced each

The R-926X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9260 Features

  • Fits seats between 435mm to 460mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9260
Price: $179.95 (USD) 
Quantity:   
OMP HSC Patent Harness Height Adjuster | Pair

Racing harnesses can become uncomfortable due to the height or angle that they sit. With this HSC Harness Height Adjuster, you will be able to adjust your harness between 3 different setting for optimal fitment and comfort. This is a great option for drivers of shorter or taller heights.

Works with racing seats that are HSC Patent Compatible.

Part #: HC/893
Price: $239.00 (USD) 
Quantity:   
OMP Cromo Racing Steering Wheel -- 350mm | Black Leather

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Part #: OD/2018
Price: $119.00 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Brey-Krause Sub belt Mount - priced each

Allows use of sub belts to Brey-Krause side mounts.

This mount will work with side mounts up to 428mm in width at the front points or any variable width mount set. 

Part #: R-9259
Price: $179.95 (USD) 
Quantity:   
Brey-Krause R-9252 Seat mount - Driver

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9252 Features

  • Fits seats between 410mm to 426mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Part #: R-9252
Price: $179.95 (USD) 
Quantity:   
Odometer Gears Seat Adjustment Isolator Bushings - (1996-2002) E36 Z3

Seat bushings that are worn can cause a bit of seat looseness causing your seat to move from front to back. To remedy this Odometer Gears offer these delrin bushings that prevent this once and for all! A significant upgrade to the OE BMW that is made of the same original rubber that is prone to fail in the same way again.

This kit includes enough bushings to fix both of the seats. 

Fits the following:
1996-2002 E36 BMW Z3

Part #: OG020
Price: $29.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OMP Racing Seat Mounting Bracket - E36 Sedan

This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E36 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Fits:
1992-1999 E36 BMW Sedan Models

Part #: HC/108
Price: $140.00 (USD) 
Quantity:   
Seat Floor Adapters - E82, E90, E92 - Macht Schnell In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or ride sides of vehicle.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
Part #: TMS22151
Price: $136.50 (USD) 
$195.00
Limited Qty Sale
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Recaro Pro Racer HANS Race Seat Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

Pro Racer HANS Seat Specs:
Shell Materialfiberglass-reinforced plastic
fabric materialvelour
fabric colorsblack
logo colorwhite
harness guidesYes for 4, 5, or 6 point
seat mountside mount, not included
slidersnot included
chassis mountsnot included

Part #: TMS340416
Price: $1499.00 (USD) 
Genuine BMW Seat Occupancy Sensor - 65776940191

Detects whether a person is present in a seat  to determine if the airbag needs activated or not.


Genuine BMW Control Electronics, Seat Occupancy
This item fits the following BMW Chassis:
E36 M3,E39 M5,E46 M3,E34,E36,E38,E39,E46,E53 X5,E65

 

Part #: 65776940191
Price: $82.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Recaro Sport Seat The Recaro Sport seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

Seat Specs:
shell materialsteel
fabric materialstandard: cloth, vinyl; optional materials: leather, suede, saturn, velour
fabric colorsstandard: black, grey; custom colors available
logo colorsilver
harness guidesYes, for 3 or 4 point
seat adjustmentsbackrest angle, lumbar, fore-aft (with optional sliders)
seat mountbottom mount
slidersnot included
chassis mountsnot included
Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPORT
    Price: $1329.00 (USD) 
    OMP TRS-E PLUS Tubular Racing Seat | Black with White Stripes

    This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is vinyl material. Tubular steel ensures strength and protection and the vinyl adds to the comfort and style of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/744E
    Price: $399.00 (USD) 
    Quantity:   
    OMP Racing Seat Base Cushion | Black Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.
    Part #: HB/695
    Price: $65.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Seat Floor Adapters with Sliders - E36 - Recaro OEM Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

    Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

    Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

    Sold per seat. Choose Left or Right in the options list below.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3 except convertible models
    Part #: TMS176960
    Price: $375.00 (USD) 
    OMP Air blower for Air Cooling Kit

    Air Blower with rubber adapter for Air Cooling Kit (HC/913). This forces the air into the kit to keep the driver cool during long races in hot conditions.

    The blower (HC/914/V) and the adapter (HC/914/R) are also available as spare parts.

    Part #: HC/914
    Price: $129.00 (USD) 
    Quantity:   
    Part #: E36-FBSD
    Price: $499.00 (USD) 
    Quantity:   
    OMP CHAMP-R: Fiberglass Racing Seat | Black

    This is an OMP performance CHAMP-R Fiberglass racing seat. The seat shell is fiberglass and the seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/766E
    Price: $659.00 (USD) 
    Quantity:   
    OMP HTE-R 400 Fiberglass Racing Seat -- Black

    OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving while still being able to be used in an area with restricted room in the upper cabin area. Medium-high side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/780E
    Price: $979.00 (USD) 
    Quantity:   
    OMP Racing Seat Mounting Bracket - E24

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E24. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    1976-1989 E24 BMW 6 Series

    Part #: HC/091
    Price: $140.00 (USD) 
    Quantity:   
    Brey-Krause R-9243 Seat mount - passenger

    The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9243 Features

    • Fits seats between 410mm to 426mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9243
    Price: $179.95 (USD) 
    Quantity:   
    OMP HTE-R Fiberglass Racing Seat -- Black

    OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/772E
    Price: $959.00 (USD) 
    Quantity:   
    Recaro Cross Sportster CS Sport Seat (Heated) The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. This seat also features a heated element in the base (with its own switch) on vinyl and leather materials. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212715
    Price: $3198.00 (USD) 
    Recaro Sportster CS Sport Seat (Heated) The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. It also has a heated bottom cushion for additional added comfort (only on vinyl and leather materials). This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212713
    Price: $4428.00 (USD) 
    Recaro Sport Topline Seat The Recaro Sport Topline seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

    The Sport Topline seat also features power adjustments for the height and tilt as well as climate control (seat venting and heating).

    Seat Specs:
    shell materialsteel
    fabric materialstandard: cloth; optional: leather, suede, vinyl
    fabric colorsstandard: black, grey; optional: blue, red, beige
    logo colorbeige, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, lumbar, hight (electric), tilt (electric), fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS22147
    Price: $2029.00 (USD) 
    OMP FIRST-R: Fiberglass Racing Seat | Black - Special Order

    This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    *Made to order, extended wait and shipping times may occur.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/790
    Price: $549.00 (USD) 
    Quantity:   
    Recaro Sportster CS Sport Seat The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl
    fabric colorsblack
    logo colorgrey
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS21549
    Price: $1499.00 (USD) 
    Recaro Speed S Seat The Recaro Speed S seat is a street tuner seat inspired by Recaro's full motorsport seats but with lower cushion height to make it easier to get in and out. The Speed S has the same aggressive side bolsters with supportive shoulder extensions as the standard Speed seat. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness.

    Seat Specs:
    shell materialsteel frame
    fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, velour
    fabric colorsstandard: black; custom colors available
    logo colorsilver, red, white, blue
    harness guidesYes, for 3 or 4 point.
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPEED-S
    Price: $949.00 (USD) 
    OMP Racing GP Racing Steering Wheel -- Black Polyurethane

    Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: OD/1981
    Price: $119.00 (USD) 
    Quantity:   
    OMP Racing Seat Mounting Bracket - Z4 BMW

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your Z4. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    2002-2008 E85 Z4 BMW 2.5 3.0 M

    Part #: HC/126
    Price: $140.00 (USD) 
    Quantity:   
    Brey Krause Variable width Fire Extinguisher Mount

    Allows mounting of any variable width extinguisher mount, for use with seats 380-440mm wide 

    For use with R-924X, R-925X, R-926X, R-928X Series side mounts 

    Part #: R-2295
    Price: $89.25 (USD) 
    Quantity:   
    Brey-Krause R-9242 Seat mount - passenger

    The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9241 Features

    • Fits seats between 427mm to 440mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9241
    Price: $179.95 (USD) 
    Quantity:   
    Brey Krause OE seat Fire Extinguisher Mount - priced each Allows mounting of 2.5lbs extinguisher bottle to factory power seats. 
    Part #: R-2216
    Price: $89.25 (USD) 
    Quantity:   
    Brey Krause R-9223 Seat mount - Passenger

    The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9223 Features

    • Fits seats between 365mm to 429mm wide at the side mount mounting point
    • Uses factory sliders, power or manual 
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)

    *Note for use with power sliders BMW switch 61311381205 is needed*

    Part #: R-9223
    Price: $179.95 (USD) 
    Quantity:   
    Recaro Profi XL Race Seat The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for drivers of all shapes and sizes. This is the larger XL seat that is over one inch larger in the torso area than the standard Profi SPG seat. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included
    Part #: TMS340420
    Price: $1099.00 (USD) 
    Part #: SKINSEATSHELL
    Price: $995.00 (USD) 
    Quantity:   
    OE Seat Fire Extinguisher Mount - priced each Allows mounting of 2.5lbs extinguisher bottle to factory manual seats. 
    Part #: R-2215
    Price: $89.25 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP HTE-R XL Fiberglass Racing Seat -- Black

    OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

    XL version for taller drivers.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/771E
    Price: $979.00 (USD) 
    Quantity:   
    Genuine BMW Seat Belt Guide - 52107009662 - E46,E46 M3

    Genuine BMW Seat Belt Guide
    This item fits the following BMW Chassis:
    E46 M3,E46

    Part #: 52107009662
    Price: $6.45 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brey-Krause R-9250 Seat mount - driver

    The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9250 Features

    • Fits seats between 427mm to 440mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9250
    Price: $179.95 (USD) 
    Quantity:   
    OMP RS-P.T. 2: Fiberglass Racing Seat | Black

    This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/762E
    Price: $759.00 (USD) 
    Quantity:   
    Harness Bar - E46 Coupe

    This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

    *For Coupe models only*

    Part #: R-1202
    Price: $735.00 (USD) 
    Quantity:   
    Brey Krause Fire Extinguisher Mount - priced each

    Allows mounting of a fire extinguisher to factory seats, due to the way the bracket mounts it moves with the seat so no leg room is lost. 

    *For vehicles with manual seats * 

    Part #: R-2210
    Price: $89.25 (USD) 
    Quantity:   
    RKP Rear Seat Delete - F82 M4 GTS

    All panels are carbon core wrapped in Alcantara, developed to integrate perfectly with the OEM M4 GTS roll bar. Save weight while maintaining the beautiful interior of your M4.

    Handmade in Germany.

    RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.

    Part #: RKP-F82-M4-RSD
    Price: $5600.00 (USD) 
    Quantity:   
    Brey-Krause R-9242 Seat mount - Driver

    The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9242 Features

    • Fits seats between 410mm to 426mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9242
    Price: $179.95 (USD) 
    Quantity:   
    Brey-Krause R-9285 Seat mount - priced each

    The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9285 Features

    • Fits seats between 385mm to 409mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9285
    Price: $179.95 (USD) 
    Quantity:   
    Brey-Krause R-9255 Seat mount - Passenger

    The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9255 Features

    • Fits seats between 395mm to 409mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9255
    Price: $179.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brey Krause Harness Mount Bar This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
    Part #: R-1305
    Price: $614.25 (USD) 
    Quantity:   
    OMP WRC-R XL Fiberglass Racing Seat | Black

    This is an OMP performance WRC-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    XL version for taller drivers.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/778E
    Price: $819.00 (USD) 
    Quantity:   
    Seat Sliders - Universal - Recaro If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

    Recaro Seat Slider types -
    Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
    With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

    The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

    Sold per seat.
    Part #: 0.70.X
    Price: $135.00 (USD) 
    Brey Krause R-9220 Seat mount - Driver

    The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9220 Features

    • Fits seats between 430mm to 460mm wide at the side mount mounting point
    • Uses factory sliders, power or manual 
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)

    *Note for use with power sliders BMW switch 61311381205 is needed*

    Part #: R-9220
    Price: $179.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP Racing Seat Lumbar Cushion | Medium - Black If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 8" by 3", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
    Part #: HB/662
    Price: $49.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP TRS-E: Tubular Racing Seat | Black

    This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/741E
    Price: $389.00 (USD) 
    Quantity:   
    Brey-Krause R-9253 Seat mount - Passenger

    The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9255 Features

    • Fits seats between 410mm to 426mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9253
    Price: $179.95 (USD) 
    Quantity:   
    Part #: HARD.E46.RSEATSD
    Price: $126.71 (USD) 
    $126.71
    Limited Qty Sale
    Quantity:   

    Trunk Delete Panel - E36

    For coupe models only
    Trunk Delete Panel - E36

    This lightweight panel at only 2.3 lbs makes your gutted E36 look like a finished project, offering seperation between your trunk and your interior.

    Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

    This product fits the following BMWs:
    1991 - 1999 E36 Coupe 318is 325is 328is

    Part #: E36-TP
    Price: $134.00 (USD) 
    Quantity:   
    Odometer Gears Pink Seat Bottom Gear - 1990-1999 E36

    Does your power seat motor no longer adjust your seat up and down but you can hear it making noise? Chances are its the gear that attaches directly to the motors shaft itself. This is a common problem that BMW does not provide an individual replacement for. 

    Luckily Odometer Gears is here to answer the calls of the people and provides us with their upgraded pink seat bottom adjustment gear. This is made to withstand wear and tear greater than the stock gear and is available separately, preventing you from needing to buy a costly new motor.

    Fits the following vehicles:
    1992-1999 E36 BMW All Models with Power Seats

    Part #: OG019
    Price: $40.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP Racing Seat Cushion for HRC Air Cooling Kit | Black Made for the OMP Air cooing Kit for the HRC racing seats, this seat padding is perforated to allow air to pass through from the cooling kit, keeping you cool and sweat free.
    Part #: HB/703
    Price: $103.00 (USD) 
    Quantity:   
    Odometer Gears White Passenger Seat Recline Gear - E36 BMW (06/1993-06/1997)

    Does your power seat motor no longer recline your seat but you can hear it making noise? Chances are it's the gear that attaches directly to the motor's shaft itself. This is a common problem that BMW does not provide an individual replacement for. 

    Luckily Odometer Gears is here to answer the calls of the people and provides us with their upgraded white seat reclining adjustment gear. This is made to withstand wear and tear greater than the stock gear and is available separately, preventing you from needing to buy a costly new motor.

    Fits the following vehicles:
    06/1993-06/1997 E36 BMW All Models with Power Seats

    Part #: OG017
    Price: $29.48 (USD) 
    $40.00
    Limited Qty Sale
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    HARD Motorsport Rear Seat Bulkhead Delete Panel - BMW E36 Coupe

    HARD Motorsport Rear "Seat Delete" Bulkhead filler panel is perfect for sealing your cabin from the trunk when gutting your vehicles of heavy rear seats. Fitting most applications, this panel is the closest option to a drop in part you can find. For vehicles with safety cages, only a small bit of modification is necessary for perfect fitment.

    Product Features:

    • .040 Laser Cut Aluminum - Light weight
    • Powdercoated finish
    • Bead rolled for strength
    • Direct fitment for BMW 2 door Coupe.

     

    Fits the following vehicles:

    E36 BMW All coupe sub-models including the M3

    Part #: HARD.E36.RSEAT
    Price: $168.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Brey-Krause R-9284 Seat mount - priced each

    The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9284 Features

    • Fits seats between 385mm to 409mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9284
    Price: $179.95 (USD) 
    Quantity:   
    OMP HRC-R-AIR: Carbon Racing Seat - Black - Special Order

    OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room. Air cooling kit installed with perforated back cushion.

    *Made to order, extended wait and shipping times may occur.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/786
    Price: $3990.00 (USD) 
    Quantity:   
    Odometer Gears White Driver Seat Recline Gear - E36 BMW

    Does your power seat motor no longer recline your seat but you can hear it making noise? Chances are it's the gear that attaches directly to the motor's shaft itself. This is a common problem that BMW does not provide an individual replacement for. 

    Luckily Odometer Gears is here to answer the calls of the people and provides us with their upgraded white seat reclining adjustment gear. This is made to withstand wear and tear greater than the stock gear and is available separately, preventing you from needing to buy a costly new motor.

    Fits the following vehicles:
    1993-1999 E36 BMW All Models with Power Seats

    Part #: OG025
    Price: $40.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Seatbelt 6-point Race Harness Receptacles - Macht Schnell Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

    * - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 79.20.150K
    Price: $174.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    OMP Racing Seat Leg Cushion | Black If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
    Part #: HB/693
    Price: $65.00 (USD) 
    Quantity:   
    OMP HRC Fiberglass Air Racing Seat -- Black

    OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/793
    Price: $999.00 (USD) 
    Quantity:   
    OMP Racing Seat Mounting Bracket - E90/93 Sedan

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E90/93 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    2006+ E90/93 BMW Sedan

    Part #: HC/141
    Price: $140.00 (USD) 
    Quantity:   
    Brey-Krause R-9240 Seat mount - Driver

    The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9240 Features

    • Fits seats between 427mm to 440mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9240
    Price: $179.95 (USD) 
    Quantity:   
    OMP WRC-R CARBON: Carbon Fiber Racing Seat | Black

    This is an OMP performance "WRC-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/769E
    Price: $2249.00 (USD) 
    Quantity:   
    Seat Floor Adapters - E36, E46, E85 - Macht Schnell In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

    Sold per seat. Can be used on left or right sides of vehicle.

    These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

    This item fits the following BMWs:
    1995-1999 E36 BMW 318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
    2003-2008 E85 E86 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: TMS21542
    Price: $225.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Seat Shims - Macht Schnell Seat Shim Set Often when installing race seats there is a gap between your seat shell to your side brackets. Or maybe you want to shim your seat to one side for a better driving position. These aluminum spacer shims are the perfect solution. They come in a satin black anodize for a stealthy look and include longer hardware in a handy low-profile rounded head.

    Included in this set:
    2 x 14mm shims with correct extended bolts
    4 x 9mm shims with correct extended bolts
    2 x 5mm shims with correct extended bolts
    4 x washers

    These are the ideal finishing touch to your seat install and the preferred method instead of using unsightly washers.

    Turner Tip: Positioning the seat close to the transmission tunnel can make it extremely difficult to attach an Allen socket/ratchet. And the Allen socket has to be firmly seated or it will strip the head. We will often use hex bolts on the inside seat locations because it is so much easier. Just make sure you get a hex that is the same grade as the original seat hardware.
    Part #: TMS25774
    Price: $59.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP HRC-D: Carbon Large Racing Seat - Black

    OMP HRC-D Premium Quality Carbon Fiber seat with head and shoulder containment with a design to allow installation and comfort in GT cars with little room.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/788
    Price: $2990.00 (USD) 
    Quantity:   
    Brey-Krause R-9251 Seat mount - Passenger

    The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9251 Features

    • Fits seats between 427mm to 440mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9251
    Price: $179.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brey-Krause R-9257 Seat mount - Passenger

    The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9257 Features

    • Fits seats between 443mm to 460mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9257
    Price: $179.95 (USD) 
    Quantity:   
    Seat Floor Adapters - E36, E46, E85 - Macht Schnell In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

    Sold per seat. Can be used on left or right sides of vehicle.

    These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

    This item fits the following BMWs:
    1995-1999  E36 BMW  318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
    2003-2008  E85 E86 BMW  Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 79.10.101B
    Price: $195.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brey-Krause R-9283 Seat mount - priced each

    The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9283 Features

    • Fits seats between 435mm to 460mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9283
    Price: $179.95 (USD) 
    Quantity:   
    Recaro Pro Racer HANS SPA Kevlar Race Seat - Size XL Save over $400 - Warehouse Clearance - Open Box - Customer Cancelled Order

    Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: 071.44.0630
    Price: $3129.00 (USD) 
    OMP Racing Seat Mounting Bracket - passenger side - E46 Coupes

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    1999-2005 BMW E46 Coupe

    Part #: HC/007/PA
    Price: $140.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP Racing Seat Helmet Protection Cushions | Black Keeping your helmet steady during a race is important for comfort, safety, and coordination. OMP helmet protection cushions are an easy addition to help keep your head and helmet from rocking too far to either side. These cushions attach to the velour fabric covering the existing helmet supports with Velcro straps. The cushions are covered in the same velour fabric with the same flame-retardant qualities. In the center of each cushion is an embroidered OMP logo.
    Part #: HB/697
    Price: $49.00 (USD) 
    Quantity:   
    Recaro Profi Kevlar Race Seat The best all-around Recaro race seat. The Profi SPA seat is fixed-back Kevlar with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: TMS340419
    Price: $2399.00 (USD) 
    OMP ARS-R CARBON: Carbon Fiber Racing Seat | Black - Special Order

    This is an OMP performance "ARS-R Carbon" carbon fiber racing seat. The seat shell is autoclave molded carbon fiber and the seat upholstery is velour and Airtex material. Carbon fiber gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    *Made to order, extended wait and shipping times may occur.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/770E
    Price: $2199.00 (USD) 
    Quantity:   
    Recaro Pro Racer SPA Flexible Adapter Mounts And Sliders The Recaro Flexible Adaptor seat mounts are the most robust and stout slider mounts we have seen. The Flexible Adapter mounts are a reinforced side mount + slider assembly intended for pro endurance racing. These are the first FIA-certified seat sliders. They have extra reinforcing braces on the front and rear which takes away a lot of the lateral motion from traditional un-reinforced side mount brackets. As racecars see more lateral loading from high downforce and stickier tires the seat naturally wants to flex even more. This extra strength seat slider/mount combination is just the thing to keep you planted in place. Even the slider hand bar is overbuilt and bright red for to grab your attention. These have been designed by Recaro specifically for endurance races where driver changes need to be done in seconds.

    This slider + mount system only works with the Recaro Pro Racer SPA/SPG seats. Choose from the standard size or XL version.
    Part #: PR0RACERFLEXADAP
    Price: $549.00 (USD) 
    OMP Asso Racing Steering Wheel -- 350mm | Black Leather

    Sporty 3-spoke OMP Asso steering wheel in 350mm diameter. Matte aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: OD/2019
    Price: $119.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Front Seat Fire Extinguisher Bracket - E90 E92 F30 F32 F80 F82

    Mount a fire extinguisher to the front seat of your BMW 3 & 4 Series 2007-2015 models including M3 and M4 with this custom made in the USA bracket.

    This is the perfect way to mount your fire extinguisher. The kit installs in minutes and can be mounted to the passenger or driver side. The bracket has two mounting locations for extinguishers a higher and close to the seat or lower and farther away. The bracket can accommodate 1.5lb and 2.5lb fire extinguishers. It does not interfere with the seat movement, so it can be in for those track days and then removed easily if desired for the street. The kit is professionally machined cut and finished with a black anodized finish.

    The kit includes one high quality aircraft grade aluminum bracket and four stainless steel screws to secure the extinguisher to the bracket. (Bracket only option DOES NOT INCLUDE FIRE EXTINGUISHER,OR EXTINGUISHER CLAMP!) Simple installation. There are no special tools required No modification needed. Kit mounts to, the front seat rails existing mounting holes and uses the stock seat bolts. Installs in less than 10 min.extinguisher available separately in the drop downs below.)

    Optional Fire Extinguisher:
    Double the size and fire-fighting-power of the smaller units. Provides you with additional extinguishing force for added security. HalGuard model HG250R quickly extinguishes car fires without any mess or damage.Extinguishing Agent - Halotron� 1, Agent (lb.) 2.5 lb, Height 14.8", Width 5", Diameter 3".

    • No thermal shock to electronics
    • No mess or damage to vehicle or surfaces
    • Liquefied gas extinguishes hard-to-reach fires
    • Does not impair operator's vision
    • EPA approvedListed and rated 2B:C by Underwriters Laboratories
    • Rechargeable
    • Made in U.S.A.2-strap mounting bracket 6' - 10' discharge range
    • High quality steel cylindersAll metal valve construction
    • Compact, lightweight, easy to use
    • Five year limited warranty



       
    • This item fits the following BMWs:
      2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
      2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
      2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
      2007-2013 E93 BMW 328i 335i 335is M3 - Convertible
      2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
      2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
      2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
      2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible 435i xDrive Convertible- Convertible
      2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
      2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
      2015+ F80 BMW M3
      2015+ F82 BMW M4
    Part #: FEB-BMW3-0714
    Price: $267.90 (USD) 
    OMP Racing Seat Mounting Bracket - E92 Coupe

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E92 Coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    2006+ E92 BMW Coupe

    Part #: HC/120
    Price: $140.00 (USD) 
    Quantity:   
    OMP HRC Fiberglass Air XL Racing Seat -- Black

    OMP racing seat with a fiberglass shell and high protection shoulder and head containment, designed for comfortable driving. Constructed with fire-resistant airnet and velour upholstering. Fiberglass shell is predrilled to allow cooling kit installation.

    This is the XL version - higher and larger than standard seat for drivers taller than 5' 10".

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/794
    Price: $1059.00 (USD) 
    Quantity:   
    Recaro Pro Racer HANS SPA Kevlar Race Seat Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: TMS22128
    Price: $3029.00 (USD) 
    Brey-Krause R-9281 Seat mount - priced each

    The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9285 Features

    • Fits seats between 390mm to 428mm wide at the side mount mounting point
    • Uses factory sliders, power or manual 
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)

    *Note for use with power sliders BMW switch 61311381205 is needed*

    Part #: R-9281
    Price: $179.95 (USD) 
    Quantity:   
    OMP Racing Seat cushion for HTE | Black Made specifically for the OMP HTE racing seat, this support cushion is covered with the same AIRTEX® material for both style and high breathability, perfect for extra long track days! This pad attaches to the seat using simple Velcro strips.
    Part #: HB/698
    Price: $75.00 (USD) 
    Quantity:   
    OMP Racing Seat Mounting Bracket - E36 Coupes

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E36 coupe. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    1992-1999 E36 BMW Coupe Models

    Part #: HC/006
    Price: $140.00 (USD) 
    Quantity:   
    Seat Occupancy Sensor Module - E82, E90, E92 Building a track or race car around your existing iDrive system? You may run into this situation when adding race seats: removing the seats also removes the passenger seat occupancy sensor mat, which triggers fault codes and warning lights on the iDrive. Macht Schnell has come out with this module that simulates the presence of the factory occupancy sensor and keeps the faults and warnings from appearing. WARNING: this module de-activates the passenger airbags and is not intended for any street driven or car driven under ordinary circumstances.

    No cutting or splicing is required. This module plugs into the factory harness for a seamless, and reversible, installation.

    NOTE: this part is for race or track-only vehicles where the stock seats and seat belts have been removed and replaced with racing parts. Any removal or deactivation of safety equipment, including any airbags, has serious consequences on the safety of yourself and others. Safety-related modifications or alterations from original spec should only be carried out by qualified professionals and inclusive in an overall plan for maintaining vehicle safety. In order to purchase this item, you must check the box below acknowledging the risk and use of this part is entirely your responsibility and absolving Turner Motorsport of any liability.

    This item fits the following US-spec BMWs:
    2008 E82 BMW 128i 135i
    2006-2008 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2008 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2008 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2008 E93 BMW 328i 335i M3 - Convertible
    Part #: TMS189779
    Price: $299.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Recaro Speed Seat The Recaro Speed is a street tuner seats inspired by Recaro's full motorsport seats. The Speed has very aggressive thigh and side bolsters with supportive shoulder extensions. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness. An option for a 5-point is available. This seat is very very close to the seats used in the special edition E30 M3 Sport Evolution model.

    Seat Specs:
    shell materialsteel frame
    fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, jersey
    fabric colorsstandard: black; custom colors available
    logo colorbeige, silver, red, black
    harness guidesYes, for 3 or 4 point. 5 point optional.
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are included. However, a vehicle-specific floor adapter plate is still required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPEED
    Price: $999.00 (USD) 
    OMP Seat Sliding bracket Sliding rail kit to be mounted between the seat mount and the seat.
    Part #: HC/665
    Price: $69.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP HTE-R Carbon Fiber Racing Seat -- Black

    OMP racing seat with a perforated Carbon fiber molded shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering. Shell is predrilled to allow cooling kit installation.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

    Part #: HA/768E
    Price: $2549.00 (USD) 
    Quantity:   
    Brey-Krause R-9261 Seat mount - priced each

    The R-926X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9261 Features

    • Fits seats between 410mm to 434mm wide at the side mount mounting point
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)
    Part #: R-9261
    Price: $179.95 (USD) 
    Quantity:   
    Racing Seat Mounting Bracket - Driver Side

    This OMP racing seat mounting bracket is made to specifically to secure a racing seat in your E46 Sedan. Using stock mounting points, it eliminates the need to weld or modify your floor in any way. Using stock mounting positions is also safer in that they are proven to hold up by the manufacturer in crash tests when the car is designed. Poorly mounted brackets could cause thin metal to tear, split, or buckle if not properly reinforced, leading directly to injury in critical situations.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Fits:
    1999-2005 BMW E46 Sedan

    Part #: HC/121/DR
    Price: $140.00 (USD) 
    Quantity:   
    Brey Krause R-9222 Seat mount - Driver

    The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-9222 Features

    • Fits seats between 365mm to 429mm wide at the side mount mounting point
    • Uses factory sliders, power or manual 
    • 7lbs
    • 304 Stainless steel
    • Black wrinkle powder coat finish 
    • Includes provisions for fir extinguisher mount(R-2295)

    *Note for use with power sliders BMW switch 61311381205 is needed*

    Part #: R-9222
    Price: $179.95 (USD) 
    Quantity:   
    OMP Racing Seat Lumbar Cushion | Small - Black If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 5" by 2", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
    Part #: HB/692
    Price: $40.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OMP ARS-R CARBON: Fiberglass Racing Seat | Black - Special Order

    This is an OMP performance ARS-R Fiberglass racing seat. The seat shell is molded fiberglass and the seat upholstery is velour and Airtex material. Fiberglass gives strength and light weight and the Airtex increases breathability of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

    *Made to order, extended wait and shipping times may occur.

    Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

    Part #: HA/774E
    Price: $759.00 (USD) 
    Quantity:   
    Side Mounts - Motion Motorsport Slotted Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

    One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

    Price is for one pair of side mounts.
    Part #: MM-SIDE-
    Price: $129.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Brey Krause OE seat Fire Extinguisher Mount - Priced each The Brey Krause R-2225 Fire Extinguisher Mount attaches to the factory seats provides a mount location for either an Amerex style 2.5 lb fire extinguisher bottle, Brey-Krause Quick Release Bottle Mounts, or the factory BMW fire extinguisher bottle/bracket. The bottle is mounted at the front of the seat, where it is close at hand but not in the way. This Mount attaches to the seat itself and moves with the seat so it will not interfere with leg room no matter the seat position.
    Part #: R-2225
    Price: $89.25 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Recaro Cross Sportster CS Sport Seat The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl
    fabric colorsblack
    logo colorgrey
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212714
    Price: $3528.00 (USD) 
    OMP Alluminum low brackets - 16 holes | Black Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm
    Part #: HC/924
    Price: $149.00 (USD) 
    Quantity:   
    Seat Floor Adapters with Sliders - E46 - Recaro OEM Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

    Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

    Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

    Sold per seat. Choose Left or Right in the options list below.

    This item fits the following BMWs:
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 except convertible models
    Part #: TMS174114
    Price: $375.00 (USD) 
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.