Z4 2.5/3.0 Shark Injector Performance Software

  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!

  • Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the Z4 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    Z4 2.5 (M54 engine) Performance Software Peak Gains

    HP Gain Up To + 7 @ 5800 RPM

    Torque Gain Up To + 7 @ 4700 RPM

    New Rev Limit7000 RPM


    M54 engine dyno chart



    Z4 3.0i (M54 engine) Performance Software Peak Gains

    HP Gain+ 4 @ 6100 RPM

    Torque Gain+ 7 @ 3400 RPM

    New Rev Limit7000 RPM


    M54 engine dyno chart


    Shark Injector Installation Instructions

    (click to expand)

    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 91.

    Shark Injector FAQ

    (click to expand)

    Shark Injector FAQ


    This item fits the following BMWs:
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i
Shark Injector
T#: 339102 | Part#: TMS1875
Save 15% $349.00
Starting at $296.65
296.65 $296.65
Qty
Free Shipping
Ships in 2 Days

Select Options

T#339102 - TMS1875 - Z4 2.5/3.0 Shark Injector Performance Software - Unlock torque and horsepowerSmoother engine with less hesitationImproved throttle responseRev limit increased to 7000Top speed limiter removedInstalls in minutes!Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54 engine beyond what BMW did by making more power and torque and a smoother-running engine.The Shark Injector plugs into the diagnostic port inside the Z4 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.Z4 2.5 (M54 engine) Performance Software Peak GainsHP Gain Up To + 7 @ 5800 RPMTorque Gain Up To + 7 @ 4700 RPMNew Rev Limit7000 RPMM54 engine dyno chartZ4 3.0i (M54 engine) Performance Software Peak GainsHP Gain+ 4 @ 6100 RPMTorque Gain+ 7 @ 3400 RPMNew Rev Limit7000 RPMM54 engine dyno chartShark Injector Installation Instructions(click to expand)Shark Injector installation instructionsA capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).The minimum octane fuel for this software is 91.Shark Injector FAQ(click to expand)Shark Injector FAQThis item fits the following BMWs:2003-2005  E85 BMW Z4 2.5i Z4 3.0i - Shark Injector - BMW
Z4 2.5 (Part# N745Z425)
Shark Injector - Corporate Logo
T#: 387566
|
Part#: N745Z425
Ships in 2 Days
Sale - Save 15% $349.00
$296.65
Qty: 1
T#339102 - TMS1875 - Z4 2.5/3.0 Shark Injector Performance Software - Unlock torque and horsepowerSmoother engine with less hesitationImproved throttle responseRev limit increased to 7000Top speed limiter removedInstalls in minutes!Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54 engine beyond what BMW did by making more power and torque and a smoother-running engine.The Shark Injector plugs into the diagnostic port inside the Z4 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.Z4 2.5 (M54 engine) Performance Software Peak GainsHP Gain Up To + 7 @ 5800 RPMTorque Gain Up To + 7 @ 4700 RPMNew Rev Limit7000 RPMM54 engine dyno chartZ4 3.0i (M54 engine) Performance Software Peak GainsHP Gain+ 4 @ 6100 RPMTorque Gain+ 7 @ 3400 RPMNew Rev Limit7000 RPMM54 engine dyno chartShark Injector Installation Instructions(click to expand)Shark Injector installation instructionsA capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).The minimum octane fuel for this software is 91.Shark Injector FAQ(click to expand)Shark Injector FAQThis item fits the following BMWs:2003-2005  E85 BMW Z4 2.5i Z4 3.0i - Shark Injector - BMW
Z4 3.0 (Part# N745Z430)
Shark Injector - Corporate Logo
T#: 387575
|
Part#: N745Z430
Ships in 2 Days
Sale - Save 15% $349.00
$296.65
Qty: 1
No Thanks, I Have A 10+ Amp Charger To Use
T#339102 - TMS1875 - Z4 2.5/3.0 Shark Injector Performance Software - Unlock torque and horsepowerSmoother engine with less hesitationImproved throttle responseRev limit increased to 7000Top speed limiter removedInstalls in minutes!Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54 engine beyond what BMW did by making more power and torque and a smoother-running engine.The Shark Injector plugs into the diagnostic port inside the Z4 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.Z4 2.5 (M54 engine) Performance Software Peak GainsHP Gain Up To + 7 @ 5800 RPMTorque Gain Up To + 7 @ 4700 RPMNew Rev Limit7000 RPMM54 engine dyno chartZ4 3.0i (M54 engine) Performance Software Peak GainsHP Gain+ 4 @ 6100 RPMTorque Gain+ 7 @ 3400 RPMNew Rev Limit7000 RPMM54 engine dyno chartShark Injector Installation Instructions(click to expand)Shark Injector installation instructionsA capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).The minimum octane fuel for this software is 91.Shark Injector FAQ(click to expand)Shark Injector FAQThis item fits the following BMWs:2003-2005  E85 BMW Z4 2.5i Z4 3.0i - Shark Injector - BMW
Yes Please (Add NBC85620)
NAPA - Corporate Logo
T#: 1471
|
Part#: TMS1471
Ships in 3 Business Days
$159.95
Qty: 1
Z4 2.5/3.0 Shark Injector Performance Software
$296.65