BMW Tools & Specialty Equipment for BMW E12 530i M30 3.0L

RennStand 3 Ton Jack Stand

T#:6811813

Part#: 18MRS3

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

CTA Tools Valve Spring Compressor Kit

T#:584140

Part#: CTA2112

In Stock

$ 115.45 USD

Add to Wish List

Qty

$ 115.45 USD

Add to Wish List

Replaces valve springs and valve stem oil seals without the need to remove the cylinder head

QuickJack SUV & Light Truck Adapter Set - BL-5000 & BL-7000 Series ...

T#:403120

Part#: 5150561

Ships in 5 Business Days

$ 236.00 USD

Add to Wish List

Qty

$ 236.00 USD

Add to Wish List

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

Low‐profile round polyurethane contact pads - Qty: 4
Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters - Qty: 4
3" stackable adapters. - Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

Show More Show Less

CTA 10 Pc. Oil Filter Wrench Kit

T#:3929147

Part#: CTA026400

In Stock

$ 89.99

This product was last offered at the strikethrough price on
05-29-2026

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

For removal of Oil & Fuel Filter Housings and spin-on filters.

QuickJack Short Rubber Contact Block Set

T#:403116

Part#: 5300861

Ships in 5 Business Days

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 6.5" long x 1.5" tall x 4" wide

Show More Show Less

4 Pc. Extractor/Fill Pump Kit

T#:640935

Part#: CTA7074

In Stock

$ 97.57 USD

Add to Wish List

Qty

$ 97.57 USD

Add to Wish List

Transfer oil or fluid with this Extractor/Filling Pump Kit

The RennStand Jack Stand - With Audi Jack Pad Adaptor

T#:6811809

Part#: 18M-RS3KT2

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

4 Pc. Spark Plug Socket Set-Euro

T#:1241318

Part#: CTA2030

Ships on Oct 6, 2026

$ 81.95 USD

Add to Wish List

Qty

$ 81.95 USD

Add to Wish List

Get the complete set and be ready.

8-Pc Brake Bleeder Wrench Set

T#:6619748

Part#: CTA1945

In Stock

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

This Brake Bleeder Wrench Set includes 7 popular sized wrenches and a 4 foot hose to allow use on virtually any car, SUV, light truck, or motorcycles brake caliper or wheel cylinder

Bav Auto Ratcheting Exhaust Pipe Cutter

10X Entries Into Our F80 M3 Sweepstakes

T#:580374

Part#: B8800053

In Stock

Sale - Save 5% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.84 USD

Add to Wish List

Ratcheting tubing cutter makes cutting exhaust tubing a breeze. Cuts without having to rotate tool completely around tubing.

The RennStand Jack Stand - With Universal Pinch Weld Jack Pad ...

T#:6811806

Part#: 18M-RS3KT

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

Urethane Pinch-Weld Block - 3x3x2.5" - Set Of Four

T#:840364

Part#: 5300013

Ships in 5 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

Specially formulated urethane rubber for durability
Deep bilateral slots accommodate virtually all pinch weld frames
Versatile positioning: lengthwise or crosswise
Water, chemical resistant, and 100% weatherproof
Single-piece construction ensures a superior hold
Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Show More Show Less

QuickJack Tall Rubber Contact Block Set

T#:403118

Part#: 5300862

Ships in 5 Business Days

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

Show More Show Less

Urethane Pinch-Weld Puck - 3" Diameter - Set Of 4

T#:840366

Part#: 5300011

Ships in 5 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Round pinch-weld pucks are specifically designed to handle even more difficult-to-reach pinch-weld rails, while protecting your car.

TL/SLX Frame Extensions - Pair

T#:1965125

Part#: 5620291

Ships in 5 Business Days

$ 410.00 USD

Add to Wish List

Qty

$ 410.00 USD

Add to Wish List

Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

QuickJack 8000TL Vehicle Lift Package - 110 Volt (60Hz)

T#:40714793

Part#: 5176009

Ships in 5 Business Days

$ 2,450.00 USD

Add to Wish List

Qty

$ 2,450.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TL vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). See full listing for more details!

7 pc. 3/8" Dr. Spark Plug Socket Set

T#:641915

Part#: 8845D

Ships in 7 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

QuickJack 8000TLX Extended Vehicle Lift Package - 110 Volt (60Hz) ...

T#:40342807

Part#: 5176113

Ships in 5 Business Days

$ 2,500.00 USD

Add to Wish List

Qty

$ 2,500.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TLX extended vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. Through superior engineering and design, QuickJack has been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that have made QuickJack a must-have in your garage. 8000TLX still has an impressive 3.5" lowered height, 76" overall length, and 12.5" overall width. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.

Show More Show Less

QuickJack BL-3500SLX - 3,500 Lb. Capacity - 110 Volt (60Hz)

Please confirm compatibility with vehicle using the "Measuring Guide Worksheet" under the "Installation" tab prior to ordering.

T#:403178

Part#: BL-3500SLX

Ships in 4 Business Days

Starting at $ 1,925.00 USD

Add to Wish List

Starting at $ 1,925.00 USD

Add to Wish List

The BL-3500SLX has a maximum lifting capacity of 3,500-lb. But its true strength is that you can take it with you. The QuickJack is so light-weight and space-efficient that you can transport it in your regular sized trunk or backseat. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less

QuickJack Medium Rubber Contact Block Set

T#:403117

Part#: 5300863

Ships in 5 Business Days

$ 86.00 USD

Add to Wish List

Qty

$ 86.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

Show More Show Less

QuickJack 6000ELX Super-Long - 6,000 Lb. Capacity - 110 Volt (60Hz) ...

SAVE $300 IN SHIPPING!

T#:3643614

Part#: 6000ELX

Ships in 4 Business Days

Starting at $ 2,694.00 USD

Add to Wish List

Starting at $ 2,694.00 USD

Add to Wish List

The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.

Show More Show Less

MaxJax Anchor Kit

T#:840348

Part#: 5215911

Ships in 5 Business Days

$ 210.00 USD

Add to Wish List

Qty

$ 210.00 USD

Add to Wish List

The standard anchor bolt kit includes 10 recessed anchors, 10 anchor bolts, and 10 flat washers, everything you need to anchor your MaxJax two-post portable car lift safely and securely

Long QuickJack Hydraulic Hose - Priced Each

T#:403155

Part#: 5570216

In Stock

$ 56.00 USD

Add to Wish List

Qty

$ 56.00 USD

Add to Wish List

Replacement long hydraulic hose - 2 required

Professional Compression Test Kit

T#:585064

Part#: MTYMV5530

Ships in 7 Business Days

$ 274.99 USD

Add to Wish List

Qty

$ 274.99 USD

Add to Wish List

Designed to test compression in cylinder.

8-Pc. Wheel Hanger Set

T#:5042237

Part#: 7076

Ships on Oct 6, 2026

$ 87.84 USD

Add to Wish List

Qty

$ 87.84 USD

Add to Wish List

Used to hang/guide wheels during removal and installation on the wheel hub

Slide Hammer Bearing Puller

T#:641253

Part#: CTA8077

Ships on Oct 6, 2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Pilot Bearing Puller

BMW Swing Arm Sleeve Kit

2003-2010

T#:585629

Part#: CTA7880

Ships on Oct 6, 2026

$ 196.36 USD

Add to Wish List

Qty

$ 196.36 USD

Add to Wish List

The CTA7880 revolutionizes control arm bushing tasks, ensuring effortless removal and installation. This tool simplifies the process by enabling work without removing the arm, saving time and effort. Its unique design securely holds and compresses new bushings, seamlessly pressing them into the suspension control arm for a precise fit. Engineered with precision and convenience, it's a must-have for mechanics and DIY enthusiasts. Upgrading your vehicle's bushings has never been this efficient. Trust in its reliability and ease of use, ensuring a hassle-free bushing replacement process. Plus, our LIFETIME REPLACEMENT program guarantees your satisfaction, making it the ultimate choice for professionals and enthusiasts alike.

Works without removing the arm, saving time and effort
Securely holds and compresses new bushes for precise installation
LIFETIME REPLACEMENT

Show More Show Less

Pressure Brake Bleeder

T#:5028770

Part#: 7015

Ships on Oct 6, 2026

$ 115.45 USD

Add to Wish List

Qty

$ 115.45 USD

Add to Wish List

Creates pressure to push brake fluid through the system

15 Pc. Shock and Strut Service Kit

T#:1316772

Part#: CTA7466

Ships on Oct 6, 2026

$ 217.56 USD

Add to Wish List

Qty

$ 217.56 USD

Add to Wish List

Tightens top mount nut with proper torque while holding the strut

3 Pc. Extended Lug Nut Socket Set

T#:5028775

Part#: 7069

Back Ordered

$ 78.60 USD

Add to Wish List

Qty

$ 78.60 USD

Add to Wish List

Protective outer sleeve and insert protects polished wheels and lug nuts from damage

15 Pc. EP Torx Plus Socket Set

T#:1105902

Part#: CTA5420

Ships on Oct 6, 2026

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

15 Pc comprehensive set offers a wide range of sizes

14 Pc. Full Polish SAE Angle Head Wrench Set

T#:642035

Part#: 9914A

Ships on Oct 12, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

7-Piece Oxygen Sensor Socket Set

T#:5282862

Part#: 2850

Back Ordered

11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Qty

11% off MSRP

$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

6pc. Oil Filter Wrench Kit With Stand

T#:3929141

Part#: CTA4326

In Stock

$ 149.99

This product was last offered at the strikethrough price on
08-03-2026

$ 125.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 149.99

This product was last offered at the strikethrough price on
08-03-2026

$ 125.99 USD

Limited Qty Sale

Add to Wish List

6-piece oil filter wrench set with stable, secure and permanent stand.

Reclining Hi-Low Creeper Seat

Cannot ship outside of US

T#:33213303

Part#: 5160119

Ships in 5 Business Days

$ 296.00 USD

Add to Wish List

Qty

$ 296.00 USD

Add to Wish List

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
TPR wheels are resistant to chemicals, acids, alcohol, and water
Wide, large diameter wheel improves rolling over rough surfaces
Heavy-duty non-slip textured marine grade vinyl
Comfortable thick-padded seat and backrest
Locking casters
Seat is resistant to abrasion, chemical, and oil

Specifications:

Length (Backrest Up): 33 in. / 840 mm
Length (Backrest Down): 45.25 in. / 1,150 mm
Width (Frame): 17 in. / 430 mm
Width Overall: 20.75 in. / 530 mm
Seat Height (Down): 6.25 in. / 161 mm
Backrest Height (Up): 31.5 in. / 800 mm
Seat/Backrest Width: 14.75 in. / 376 mm
Ground Clearance: ≈3 in. / 76 mm
Seat Angle Min. / Max.: ≈0° to 30°
Maximum Load: 600 lbs. / 272 kg.
Backrest Angle Adjustment: Gas spring
Seat Angle Adjustment: Mechanical Lock — 3 positions
Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
Frame Materials: Full powder coated, welded steel square tube
Weight: 41.25 lbs. / 19 kg.
Backrest Angle Min. / Max.: ≈0° to 70°