Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

The ECS Billet Master Cylinder Fitting is the ultimate solution for a notorious failure point in BMW E30 clutch systems. This critical fitting, located at the end of the master cylinder reservoir hose, is responsible for delivering hydraulic fluid to the clutch master cylinder inlet. Unfortunately, the OEM plastic fitting is prone to degradation after prolonged exposure to brake fluid, often leading to total hydraulic pressure loss and brake fluid leaks inside your vehicle.

ECS has addressed this issue by engineering a robust and long-lasting alternative. Crafted from 6061 billet aluminum and finished with black hard-coat anodizing for superior corrosion resistance, this precision-machined fitting replaces the fragile plastic original, ensuring leak-free performance for the lifetime of your vehicle. Upgrade to our Billet Master Cylinder Fitting during your next clutch master cylinder service and enjoy peace of mind knowing your BMW is equipped with a durable, high-quality solution.

Features & Benefits:

Made from 6061 billet aluminum for a permanent, reliable upgrade over the factory plastic fitting. Black hard-coat anodized finish ensures long-lasting protection against the elements. Precision-machined barbs match OEM dimensions for a leak-free seal with Genuine and aftermarket master cylinders. Designed for a secure fit within the factory grommet location. Prevents brake fluid leaks and loss of clutch hydraulic pressure caused by plastic fitting failure. Upgrade your BMW and bulletproof your master cylinder with the ECS Billet Aluminum Master Cylinder Fitting. Ensure clutch hydraulic system reliability and enjoy peace of mind knowing your failure-prone plastic master cylinder fitting has been addressed.

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions*** 

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1988 E28 BMW M5
1987-1989 E24 BMW M6 

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Upgrade your BMW's wheel bolts to ECS Titanium Wheel Bolts for improved performance and durability. These bolts are designed for performance enthusiasts looking to save weight and maintain high quality. With a 50% reduction in weight compared to steel bolts, they reduce rotational mass on your vehicle. CNC'd from annealed titanium alloy, they undergo rigorous testing to ensure durability and resistance to fatigue or failure. Before installation, ensure thorough cleaning of hub threads to prevent any issues.

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for durability
• Tested to class 10.9 fastener proof load requirements
• Compatible with wheel spacers for proper fitment

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

• High-quality silicone construction for durability
• Precision-engineered design ensures a perfect fit
• Versatile solution for various automotive projects
• Enhances performance and reliability
• Compatible with BMW and other vehicles

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Protect Your Wheels with ECS Tuning Wheel Lock Sets

Safeguard your valuable wheels with ECS Tuning Wheel Lock sets, providing an extra layer of protection against theft without requiring expensive alterations. Bid farewell to concerns about wheel security, especially after investing significant time in searching for the ideal wheels or painstakingly polishing each mesh spoke.

These wheel locks effectively replace one of your wheel bolts, ensuring heightened security and peace of mind. Each kit includes a special socket tool for convenient removal. With a factory bolt length of 38mm and a conical seat design, these locks are compatible with most aftermarket wheels. However, exercise caution and avoid overtightening or using air tools. Also, note that lock keys are specifically oriented to fit bolts in a single, precise position.

BMW Performance Weighted Shift Knob

Looking to enhance the driving experience of your BMW with a performance shift knob? The BMW Performance Weighted Shift Knob is the perfect choice. This shift knob is designed to improve shifting precision and overall feel, giving your BMW a sportier and more responsive drive. Crafted with high-quality materials and precision engineering, it offers the following benefits:

• Enhances shifting precision and overall feel
• Gives your BMW a sportier and more responsive drive
• Crafted with high-quality materials for durability
• Easy installation process for hassle-free setup

ECS Tuning Wheel Lock Sets for BMW

Protect your BMW's wheels from theft with ECS Tuning Wheel Lock Sets. These locks offer added security and peace of mind, preventing unauthorized removal of your valuable wheels. With easy installation and a special socket tool included, you can safeguard your investment without costly alterations.

Benefits:

• Enhanced security for your expensive wheels
• Easy installation without the need for costly alterations
• Special socket tool included for convenient removal
• Designed to work with most aftermarket wheels

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

• High-quality silicone couplers and elbows for BMW projects
• Precision-engineered for reliability and performance
• Versatile solution for intercooler installations, custom intake systems, and more
• Ensures durability and longevity for your automotive projects

Looking for the most attractive and adjustable tip on the market? Look no further than our ECS Swivel Exhaust Tips!

Featuring a unique swivel collar design that allows the tip to be adjusted in any direction to achieve that perfect fitment. Simply adjust the tip to your desired position and tighten the hex bolt to 14 ft-lbs (19 Nm) and the tip will stay where positioned.

Every ECS Exhaust Tip comes with a precision laser etched ECS Tuning logo and features a slant cut, double wall, rolled edge for a stunning appearance! These are engineered to last, featuring chrome plated nuts, 304SS cap screw, clamp, insert ring and exhaust tip.

Available in 3.5" or 4.0" outlet and chrome or black chrome finish.

Dimensions:

Inlet Size: 2.50"
Overall Length: 7.0"
Outlet Size: 3.50"
Outlet Style: Double Wall, Rolled Edge, Slant Cut
**Modification may be required for proper fitment.**

If you're looking to fabricate your custom exhaust project and need quality, price-friendly options, then we have you covered with our ECS Tuning Universal Exhaust catalog! These select items feature the same premium benefits as our In-House Engineered Exhaust Systems so you can be confident in their quality and longevity!

PART DESIGN

• Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish
• 2.50" outside diameter (OD)
• 1.5mm (.060") wall thickness tubing for durability
• Overall Length (OAL) is approximately 24.00"

PRODUCT DEVELOPMENT

Throughout our development process of our In-House Engineered Exhaust Systems, we have developed top-tier exhaust components, direct-fit to specific European applications. We want to offer the same great quality items to our customers who want to fabricate their own custom-exhaust project, so now you can make it your own!

INSTALLATION AND SUPPORT

• These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required.
• Since these are brushed for a high-quality appearance, special prep/clean procedures must be adhered to for proper welding.
• Install photos depict possible usage of our Universal Exhaust Components. Only contains the item listed above.

Upgrade the wheel hardware of your BMW with the BMW Titanium Conical Seat Wheel Bolt - 12x1.5x35mm - Set Of 20. This comprehensive set of titanium wheel bolts is designed to enhance both the aesthetics and performance of your BMW. Engineered specifically for BMW models, these conical seat wheel bolts offer superior strength and durability compared to traditional steel bolts. Elevate the style and functionality of your BMW with this premium titanium wheel bolt set.

• Enhances the aesthetics and performance of your BMW
• Superior strength and durability compared to traditional steel bolts
• Engineered specifically for BMW models
• Set of 20 bolts ensures complete wheel installation

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs: 

E30 BMW M3

E28 BMW 524td 528e 533i 535i 535is M5

E24 BMW 633CSi 635CSi M6