BMW 5 Series E28 (1982-1988)

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

The 2.7 liter inline-6 is a torquey car, however, performance drops off greatly after 4000 RPM. With a Turner Performance Chip power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and park maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain +24 @ 4,500 RPM

Torque Gain: +28 @ 4,500 RPM

New Rev Limit: 5,300 RPM

NOTE: your car may have a replacement DME ending in 021. Our chips will work in this replacement computer as long as the existing chip is not soldered.

This item fits the following BMWs:
1985-1987 E30 BMW 325e 325es
1985-1987 E28 BMW 528e with build date of 09/1984 up to 09/1987

Turner Performance Chip: Unleash Your BMW's Hidden Power

Discover the effortless way to enhance your BMW's performance with the Turner Performance Chip. Dyno-tuned by the renowned BMW expert, Jim Conforti, this chip offers a gateway to increased power and torque, all while preserving the essence of your BMW. Explore the compelling features of this remarkable product:

• Unlock the true potential of your BMW with the Turner Performance Chip. Carefully designed to optimize high-octane (91+) pump gas, it delivers superior mid-range torque and high-RPM horsepower, thanks to Jim Conforti's meticulous tuning.
• Experience a performance boost with raised rev limits and precisely tuned fuel and spark maps, ensuring your BMW surpasses its factory performance without compromising safety and driveability.
• Enjoy a hassle-free installation process – each chip is crafted for accessibility, arriving with detailed instructions. Enthusiasts using common hand tools can typically complete the installation within an hour.
• Benefit from Turner Motorsport and Jim Conforti's wealth of experience, spanning over 20 years in the realm of BMW software tuning. These performance chips stand out from generic eBay alternatives, as they are meticulously designed with extensively tested fuel and spark maps, ensuring peak performance without any compromise.
• Jim Conforti, a recognized authority in BMW chip tuning, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, his reputation is a testament to the unparalleled expertise in the field. Opt for the best – your BMW deserves nothing less.
• The legendary M30 "big six" engine, known for its mid-range torque, can now achieve even greater high-end power with the Turner Conforti Performance Chip. It significantly enhances peak horsepower and mid-range torque, revitalizing your BMW's performance and maintaining its unique character.
• Key Performance Metrics: - Horsepower Gain: +24 @ 5,000 RPM - Torque Gain: +29 @ 2,000 RPM - New Rev Limit: 6,600 RPM
• Rest assured with provided installation instructions, ensuring a straightforward process even for enthusiasts.
• Turner's confidence in the transformative potential of this product is underscored by their 30-day money-back guarantee, backed by ECS Tuning.

When the first M5 and M6 were brought to the U.S. they were de-tuned from their European brothers and sisters. That was a shame as the cars lost close to 40hp. But adding a Turner Performance Chip will get that lost horsepower back! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. As a result there is a 48 horsepower increase at 6000 RPM with a new rev limit of 7200 RPM! Conforti achieved this by tuning the car on the dyno, specifically changing the fuel and spark patterns in an effort to make the engine more efficient when burning 91+ octane fuel. Torque increases similarly in the heart of the powerband.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+48 @ 6,000 RPM

Torque Gain:+32 @ 5,000 RPM

New Rev Limit7,200 RPM

This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es