BMW 5 Series E28 (1982-1988)

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

The 2.7 liter inline-6 is a torquey car, however, performance drops off greatly after 4000 RPM. With a Turner Performance Chip power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and park maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain +24 @ 4,500 RPM

Torque Gain: +28 @ 4,500 RPM

New Rev Limit: 5,300 RPM

NOTE: your car may have a replacement DME ending in 021. Our chips will work in this replacement computer as long as the existing chip is not soldered.

This item fits the following BMWs:
1985-1987 E30 BMW 325e 325es
1985-1987 E28 BMW 528e with build date of 09/1984 up to 09/1987

Pentosin CHF 11S hydraulic oil is a specially designed synthetic oil crafted for various vehicle hydraulic systems. It serves power steering, level control, hydraulic suspension, and shock absorbers. With a broad temperature tolerance, it suits both hot and cold climates exceptionally well. Meeting DIN 51 524T3 and ISO 7308 specification standards, this oil ensures quality and performance.

Regular maintenance, including fluid drain, flush, and refill of the steering fluid, removes contaminants and revitalizes fluid additives. This process safeguards against abrasion, chemical attacks, and corrosion, ensuring system longevity and efficiency.

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

• 5 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
• Liqui Moly UV Flashlight
• Mann Oil Filter Kit
• Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

• Smooth engine running characteristics
• Long engine service life due to exceptional protection against wear
• Rapid oil delivery at low temperatures
• Optimum oil pressure at all engine speeds
• Premium lubrication reliability at high and low temperatures
• High shear and ageing stability
• Reduces fuel consumption and pollutant emissions
• Outstanding engine cleanliness
• Tested with catalytic converters and performance proven with turbochargers
• Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

• ACEA C3
• API SN / CF
• VAG 502.00 / 505.00
• BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es