BMW Tools & Specialty Equipment for BMW E3 2800 M30 2.8L

This great Schwaben kit is designed to work on todays modern cars. Set contains popular torx and triple square bits found on a lot of German and other European cars. Designed to operate in minimal space situations.

Set Contains:

• 6 stubby triple square with 12 mm hex to be used with included 12 mm ratcheting wrench. 4 mm, 5 mm, 6 mm, 8 mm and 10 mm. 
• 4 stubby triple square with 19 mm hex to be used with included 19 mm ratcheting wrench.. 12 mm regular and  14 mm, 16 mm and 18mm tamper proof triple square.
• Set also includes a 3/8" drive 12 mm socket and 1/2" drive 19 mm socket to fit bits. Good for using bit with ratchet or torque wrench.
• 9 torx bits 10 to 70 torx 
• Includes blow molded case with sturdy foam insert to keep every thing in order.

Designed for precision and durability, the VIM Tools 10 Piece Half Cut Stubby Torx Driver Set offers an updated solution for Torx applications. This new version of the HCT1050 is now packaged on a green Magrail, delivering a streamlined organization system for your tools.

With sizes ranging from T10 through T50, each driver features a 1/4" square drive and a compact 3/4" overall length, perfect for tight spaces. Crafted from heat-treated S2 steel with a satin chrome finish, these drivers ensure long-lasting performance and corrosion resistance.

Key Features:

• Wide Range of Sizes: T10 through T50 to cover various applications.
• Compact Design: 1/4" square drive with 3/4" overall length for hard-to-reach areas.
• Durable Build: Heat-treated S2 steel for enhanced strength and durability.
• Satin Chrome Finish: Corrosion-resistant and easy to clean.
• Half Cut Design: 1/2" cut drivers offer precise fitment.
• Magnetic Organization: Packaged on a green Magrail for convenient storage.

Includes:

• T10 (HCT10-04)
• T15 (HCT15-04)
• T20 (HCT20-04)
• T25 (HCT25-04)
• T27 (HCT27-04)
• T30 (HCT30-04)
• T40 (HCT40-04)
• T45 (HCT45-04)
• T47 (HCT47-04)
• T50 (HCT50-04)

A perfect collection of hex head sockets compiled in a case that's always ready to go.

Features:

• High strength hex driver set, in 3/8 and 1/2-inch drive, is rugged enough for professional use and includes 4, 4.5, 5.5, 6, 8, 12, 14, and 17mm sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program