BMW E30 M3 S14 2.3L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:
AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than hood pins!
AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
Starting at $ 72.99 USD
Free Shipping
Add to Wish List
Starting at $ 72.99 USD
Free Shipping
Add to Wish List
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
Lisle Quick Quad Pad Spreader
Lisle Quick Quad Pad Spreader
Lisle - Corporate Logo
T#:556595
Part#: LIS29100
In Stock
$ 104.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 104.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Spread caliper pistons with one hand.
Extended Spark Plug Socket
Extended Spark Plug Socket
Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
3/8" drive socket with 5/8" opening for most spark plugs
Deep Hole Alum Head M14X1.25 Spark Plug Hole Repair Kit
Deep Hole Alum Head M14X1.25 Spark Plug Hole Repair Kit
Lisle - Corporate Logo
T#:31158741
Part#: LIS65200
Ships in 1 Business Day
$ 162.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 162.99 USD
Free Shipping on orders $49 and up
Add to Wish List
18" APEX ML-10RT Forged Wheels - Set Of Four
18" APEX ML-10RT Forged Wheels - Set Of Four
APEX Wheels - Corporate Logo
T#:31755244
Part#: ML10188540120GKT
Ships in 5 Business Days
$ 2,676.00 USD
Add to Wish List
$ 2,676.00 USD
Add to Wish List
Vacuum Gauge and Fuel Pump Tester
Vacuum Gauge and Fuel Pump Tester
Lisle - Corporate Logo
T#:5498468
Part#: 20300
In Stock at Vendor
$ 43.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 43.99 USD
Free Shipping on orders $49 and up
Add to Wish List
A must have
Dual Drive Oxygen Sensor Wrench
Dual Drive Oxygen Sensor Wrench
Lisle - Corporate Logo
T#:641698
Part#: LIS12390
Ships in 1 Business Day
$ 30.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Tool comes with both 1/2" and 3/8" drive.
universal Handbrake Tool
universal Handbrake Tool
Lisle - Corporate Logo
T#:5512194
Part#: 44210
Ships in 6 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.
Lisle CV Boot Clamp Pliers
Lisle CV Boot Clamp Pliers
Lisle - Corporate Logo
T#:5512204
Part#: LIS30600
Ships in 1 Business Day
$ 40.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 40.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Crimps Ear-Type Clamps in Hard-to-Reach Areas.
Windshield Locking Strip Tool
Windshield Locking Strip Tool
Lisle - Corporate Logo
T#:3729734
Part#: LIS47000
In Stock at Vendor
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 22.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Unique design allows tip to swivel 90 degrees in either direction to work where others won't.
7 pc. 3/8" Dr. Spark Plug Socket Set
7 pc. 3/8" Dr. Spark Plug Socket Set
Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 79.99 USD
Free Shipping
Add to Wish List
$ 79.99 USD
Free Shipping
Add to Wish List
Complete set of spark plug sockets.
8 QT Dispenser with Lid and Cap
8 QT Dispenser with Lid and Cap
Lisle - Corporate Logo
T#:3672495
Part#: LIS19702
Ships in 1 Business Day
$ 28.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 28.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep your oils clean and ready to dispense
Cylinder Leak Tester
Cylinder Leak Tester
Lisle - Corporate Logo
T#:5498460
Part#: 75500
In Stock at Vendor
$ 50.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 50.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Quickly pinpoint or check for combustion leaks.
Coil On Plug Spark Tester
Coil On Plug Spark Tester
Lisle - Corporate Logo
T#:5677377
Part#: LIS20700
Ships in 6 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Great for spark testing on many applications.
APEX ARC-8 Wheel Anthracite - Squared Set
APEX ARC-8 Wheel Anthracite - Squared Set
APEX Wheels - Corporate Logo
T#:597327
Part#: ARC81785ET20ANKT
Ships in 5 Business Days
$ 1,216.00 USD
Free Shipping
Add to Wish List
$ 1,216.00 USD
Free Shipping
Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

  • Enhanced strength and lightweight performance
  • Innovative Flow-formed semi-forging process
  • Average weight reduction of 10lbs or more
  • Ample room for brake systems
  • Classic motorsports design matches BMW's aggressive style
Show More Show Less
1/2" Drive 24mm Universal Impact Socket
1/2" Drive 24mm Universal Impact Socket
Sunex - Corporate Logo
T#:5229449
Part#: 224UMD
Ships Jul 21, 2025
$ 27.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 27.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Deep Impact Socket on a swivel.
14 Pc. Full Polish SAE Angle Head Wrench Set
14 Pc. Full Polish SAE Angle Head Wrench Set
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships Jul 21, 2025
$ 124.00 USD
Free Shipping
Add to Wish List
$ 124.00 USD
Free Shipping
Add to Wish List
Radius V-Groove design creates an anti-slip while also preventing round-off.
3/8" Dr. External Star Impact Socket Set
3/8" Dr. External Star Impact Socket Set
Sunex - Corporate Logo
T#:5269512
Part#: 3670SED
Ships Jul 21, 2025
$ 62.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 62.00 USD
Free Shipping on orders $49 and up
Add to Wish List
CR-MO alloy steel for long life
2 Ton Long Lowrider Service Jack
2 Ton Long Lowrider Service Jack
Sunex - Corporate Logo
T#:385986
Part#: 6602LPD
Back Ordered
$ 690.00 USD
Add to Wish List
$ 690.00 USD
Add to Wish List
Designed to reach far under your vehicle with this long and low chassis
4 Piece Mini hook & Pick Set
4 Piece Mini hook & Pick Set
Lisle - Corporate Logo
T#:5512197
Part#: 31750
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 13.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Works Great for Removing Hoses, Moldings, Clips, Clamps, Seals, O-Rings, Cotter Pins, and Gaskets.
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 16.00 USD
Free Shipping
Add to Wish List
$ 16.00 USD
Free Shipping
Add to Wish List
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
Mini Flexible Magnetic Pick-Up Too
Mini Flexible Magnetic Pick-Up Too
Lisle - Corporate Logo
T#:5498462
Part#: 66540
Ships in 1 Business Day
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 9.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Can't reach that bolt or tool you dropped? Telescoping Magnet to the rescue
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
In Stock
$ 9.99 USD
Free Shipping
Add to Wish List
$ 9.99 USD
Free Shipping
Add to Wish List
APEX Wheels Metal Valve Stem - Black - BMW & MINI
APEX Wheels Metal Valve Stem - Black - BMW & MINI
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 12.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 12.00 USD
Free Shipping on orders $49 and up
Add to Wish List
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
Add to Wish List
$ 469.00 USD
Free Shipping
Add to Wish List
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Right Angle Funnel
Right Angle Funnel
Lisle - Corporate Logo
T#:31589420
Part#: LIS17232
Ships in 1 Business Day
$ 12.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 12.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Apex ML-10RT 18x11 ET44 5x120mm 72.56mm in Race Silver
Apex ML-10RT 18x11 ET44 5x120mm 72.56mm in Race Silver
APEX Wheels - Corporate Logo
T#:35492004
Part#: ML10RT1811ET44
Ships in 5 Business Days
$ 719.00 USD
Free Shipping
Add to Wish List
$ 719.00 USD
Free Shipping
Add to Wish List
The Forged ML-10RT is the answer for enthusiasts craving a wheel design that combines classic motorsport styling with modern monoblock forging technology. This wheel was initially developed in the shadows by one of our Senior Engineers exclusively for his BMW E46 M3 widebody race car, and after sharing photos of the prototypes on social media, we received an overwhelming amount of interest from the community to bring it to market. Just like our existing flagship motorsport designs, the ML-10RT was designed from the ground up by our team of in-house engineers and underwent the same extensive FEA analysis and third party testing. It’s made from the highest grade 10K ton forged 6061-T6 aluminum, and utilizes true motorsport blanks, which is a vital component in our ability to deliver vehicle-specific optimizations like maximum concavity, optimal spoke design and critical brake clearance. The end result is a perfect blend of weight savings, added stiffness and strength, all while staying true to the classic motorsport design language we all love. The ML-10RT also sports our reinforced Sprint Spec inner lip and a 1600lb (1650lb for Porsche applications) load rating, which is the same lip design and load ratings we use for our popular Forged Sprint Line.
Show More Show Less
APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 19.99 USD
Free Shipping
Add to Wish List
$ 19.99 USD
Free Shipping
Add to Wish List
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
3 Ton Aluminum Floor Jack
3 Ton Aluminum Floor Jack
Sunex - Corporate Logo
T#:385984
Part#: 6603ASJD
Ships in 6 Business Days
$ 720.99 USD
Add to Wish List
$ 720.99 USD
Add to Wish List
Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you
APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 469.00 USD
Add to Wish List
$ 469.00 USD
Add to Wish List
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
18" APEX ML-10RT Forged Wheels - Set Of Four
18" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31755243
Part#: ML10188540120RKT
Ships in 5 Business Days
$ 2,676.00 USD
Add to Wish List
$ 2,676.00 USD
Add to Wish List
Apex ML-10RT18x9.5 ET22 Wheels
Apex ML-10RT18x9.5 ET22 Wheels
APEX Wheels - Corporate Logo
T#:35492008
Part#: ML10RT1895ET22
Ships in 5 Business Days
$ 689.00 USD
Free Shipping
Add to Wish List
$ 689.00 USD
Free Shipping
Add to Wish List
18x9.5 ET22 5x120mm/ 72.56mm Race Silver
3/8" Low Profile Oil Filter Socket Set (24mm-36mm)
3/8" Low Profile Oil Filter Socket Set (24mm-36mm)
Lisle - Corporate Logo
T#:14882881
Part#: 13270
Ships in 2 Business Days
$ 87.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 87.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Wire Type Spark Plug Gapper .040 to .080
Wire Type Spark Plug Gapper .040 to .080
Lisle - Corporate Logo
T#:641655
Part#: LIS67900
Ships in 1 Business Day
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Always check gap on your new spark plugs
10 Piece Bearing Race & Seal Driver - Master Set
10 Piece Bearing Race & Seal Driver - Master Set
Lisle - Corporate Logo
T#:34147734
Part#: LIS12980
Ships in 6 Business Days
$ 132.99 USD
Add to Wish List
$ 132.99 USD
Add to Wish List

This comprehensive set features nine drivers designed to fit a wide range of common wheel bearings. Simply flip the discs to use them for seal installation. Comes in a handy clamshell case for easy storage.


Includes:

  • 1.565" Driver
  • 1.750" Driver
  • 1.965" Driver
  • 2.325" Driver
  • 2.470" Driver
  • 2.555" Driver
  • 2.830" Driver
  • 2.995" Driver
  • 3.180" Driver
  • Driver Tool
  • Blow Molded Case
Show More Show Less
7mm Brake Caliper Socket
7mm Brake Caliper Socket
Lisle - Corporate Logo
T#:3729717
Part#: LIS33900
Ships in 1 Business Day
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Knock that brake caliper loose with this 7mm socket!
APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Ships in 5 Business Days
$ 449.00 USD
Add to Wish List
$ 449.00 USD
Add to Wish List
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
No Splatter Oil Drain Pad
No Splatter Oil Drain Pad
Lisle - Corporate Logo
T#:1120849
Part#: LIS38750
Ships in 1 Business Day
$ 16.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 16.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Brake Bleeding Kit
Brake Bleeding Kit
Lisle - Corporate Logo
T#:641687
Part#: LIS19200
Ships in 6 Business Days
$ 13.99 USD
Add to Wish List
$ 13.99 USD
Add to Wish List
Services calipers, wheel cylinders, and master cylinders
Hose Pinchers
Hose Pinchers
Lisle - Corporate Logo
T#:641682
Part#: LIS22850
Ships on Jul 18, 2025
$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List
A must for any car enthusiast.
APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 449.00 USD
Free Shipping
Add to Wish List
$ 449.00 USD
Free Shipping
Add to Wish List
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Extractor Set Stripped Screw 10 Pc.
Extractor Set Stripped Screw 10 Pc.
Lisle - Corporate Logo
T#:31556187
Part#: LIS61980
Ships in 1 Business Day
$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
18" APEX ML-10RT Forged Wheels - Set Of Four
18" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31755242
Part#: ML10188540120AKT
Ships in 5 Business Days
$ 2,676.00 USD
Add to Wish List
$ 2,676.00 USD
Add to Wish List
Magnetic Pick-Up Tool
Magnetic Pick-Up Tool
Lisle - Corporate Logo
T#:5498463
Part#: 66500
Ships in 1 Business Day
$ 7.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 7.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Can't reach that bolt or tool you dropped? Telescoping Magnet to the rescue
18" APEX EC-7RS Square Forged Wheel Set
18" APEX EC-7RS Square Forged Wheel Set
APEX Wheels - Corporate Logo
T#:19395603
Part#: EC7RS189535SQ
Ships in 5 Business Days
Starting at $ 2,796.00 USD
Free Shipping
Add to Wish List
Starting at $ 2,796.00 USD
Free Shipping
Add to Wish List
Apex EC-7RS 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
6-Ton Jack Stands - Pair
6-Ton Jack Stands - Pair
Sunex - Corporate Logo
T#:386187
Part#: 1006D
Ships in 6 Business Days
$ 153.99 USD
Add to Wish List
$ 153.99 USD
Add to Wish List
These jack stands have steel base pads for superior stability
Brake Caliper Hanger Set
Brake Caliper Hanger Set
Lisle - Corporate Logo
T#:1120855
Part#: 48020
Ships in 1 Business Day
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Hangs the Disc Brake Caliper Out of the Way During Service While Keeping Tension Off the Brake Line.
Brake Caliper Brush
Brake Caliper Brush
Lisle - Corporate Logo
T#:3657944
Part#: LIS13410
Ships in 2 Business Days
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Clean rust dirt and other debris from your brake caliper.
Lisle Cat III Digital Multimeter
Lisle Cat III Digital Multimeter
Lisle - Corporate Logo
T#:5512207
Part#: 82600
Ships in 3 Business Days
$ 63.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 63.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Safely and Accurately Test Electrical Systems. Large, Easy to Read LCD Display with Backlight.
APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Ships in 5 Business Days
$ 449.00 USD
Free Shipping
Add to Wish List
$ 449.00 USD
Free Shipping
Add to Wish List
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping