BMW Engine Parts for BMW E30 M3 S14 2.3L

The No-Compromise Oil Pan for Your 24V E30 Build

Every E30 swap story starts the same way: you want the reliability and power of a modern BMW 24V engine - M50, M52, S50, or S52 - but without heavy modifications or a list of oil pan parts that are no longer available(NLA). You’ve read the forums, seen the DIYs, and done the math. And you’re still faced with the same question: how am I going to find all of these parts and make them work?

That’s exactly the problem we set out to solve.

At Turner Motorsport, we’ve been building BMWs for decades. We've performed the swaps, turned the wrenches, and taken the laps. The Turner Fabricated Oil Pan was born out of that experience, an enthusiast-engineered solution that eliminates the guesswork and lets you focus on what really matters: driving.

We designed this oil pan from the ground up to support 24V engine swaps into the E30 chassis, with zero permanent modifications.

Crafted from TIG-welded 5052 aluminum, this pan is as durable as it is lightweight. The brushed anodized finish adds a subtle shine under the hood and guards against corrosion for long-term reliability. Inside, we’ve integrated full-length oil control baffles with trap doors, ensuring your oil stays where it needs to be, even under the most aggressive acceleration, braking, and cornering.

The low-profile design is perfect for lowered cars, and the 8 mm-thick flange ensures a proper seal with the factory gasket. We didn’t stop there, every pan includes a billet aluminum oil pickup with an integrated stainless mesh screen that’s fully serviceable, a 304 stainless steel dipstick tube, and a billet rear transmission plate that allows you to utilize the lower mounting holes, unlike the stock E34 pan.

Whether you're building a high-performance street car, a dedicated track weapon, or a clean restomod, this oil pan offers OEM-level integration with aftermarket performance. It’s the cleanest, easiest, and most effective way to run a 24V engine in your E30 — built by BMW lovers, for BMW lovers.

Design:

Fully TIG-welded 5052 aluminum construction
Brushed anodized finish for a clean look and corrosion resistance
Engineered specifically for M5X/S5X engines in the BMW E30 chassis
Front-sump design clears the factory E30 subframe, no cutting or modification required
Designed and tested in-house by BMW enthusiasts
Features:

Built-in oil control baffles with trap doors to prevent starvation under cornering
Low-profile design for maximum ground clearance - perfect for lowered cars
Billet aluminum oil pickup with integrated stainless mesh screen - fully serviceable
8mm thick flange ensures a reliable seal with OEM gasket
Works with all standard 24V swap motor mounts
3/8" NPT port for turbo oil drain and 1/4" NPT for OBD2 CCV drain
Compatible with G260 and ZF transmissions
Stainless steel dipstick tube (304) included for strength and appearance
Utilizes E36 Dipstick (P# - 11431427993)
Kit Contents:

Turner Fabricated Oil Pan
Billet Rear Mounting Plate
304SS Dipstick Tube with Mounting Hardware
Billet Aluminum Oil Pickup
Optional: Oil Pan Gasket, Oil Filter, and Motor Oil
Optional: Complete Install Hardware Kit
Why It Works:

Direct fitment for M5X/S5X into E30, no cutting or fabrication required
Maximum clearance for front subframe, steering rack, and lowered suspension setups
Track-proven baffling to prevent oil starvation under load
Transmission compatibility with Getrag and ZF gearboxes
Built by enthusiasts, designed and tested in-house on real cars
Please note this will require an oil pump from M50/M52/S50/S52, M52TU, M54, and S54 oil pumps will need to be replaced with a single vanos oil pump.

Product development:

Our swap pan components are designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Group A racecars were the top of their class in both touring car and rally racing. Heavily modified and extremely fast these cars set out to demonstrate the best of what a manufacturer could do on the racetrack. It was the predecessor to the current DTM class racing and set a standard for many other divisions of motorsport to follow.  

One of the weaker points of the S14 engine, when speaking from a racing standpoint is the belt drive system. While fine for a street going car, a V-belt is not suitable for high RPM applications. On the track, most of your time will be spent in the higher rev range which puts extreme amounts of stress on the factory setup. BMW realised this and came up with a solution that involved doing away with the V belt system and using a 6 rib serpentine style instead.

Extremely resistant to slippage and failure this design holds up much better the abuse of track duty and won't leave you stranded and waiting for tow back to the pit. Additionally, this kit does not accommodate and a/c compressor and the alternator and waterpump are underdriven by way of slightly larger pulleys. Combined, this puts less of a load on the crankshaft which leads to more efficient power delivery to the ground. If you track you E30 M3, this is an essential upgrade and until now was extremely difficult to source. Do not skip this pivotal step in your engine build or overhaul and get a leg up on the competition the Group A way.
Please note this kit is special order and in non-returnable

Features:​

• Kit replaces all engine pulleys and crank damper
• Includes 6 rib serpentine belt
• Underdriven waterpump and alternator pulleys
• Recommended for off road and racing use only 

This kit fits the following BMWs:
1986-1992 BMW M3 All