Turner Motorsport for BMW E30 M3 S14 2.3L

Turner Motorsport Air Freshener - Vanilla

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:797064

Part#: TURMAF-VANILLA

In Stock

Sale - Save 2% $ 2.99

This product was last offered at the strikethrough price on
05-15-2026

$ 2.93 USD

Add to Wish List

Qty

Sale - Save 2%

$ 2.99

This product was last offered at the strikethrough price on
05-15-2026

$ 2.93 USD

Add to Wish List

Support Team Taco while keeping your ride smelling fresh with this stylish air freshener!

Turner Motorsport Sticker(White) - 2.5 x 5.5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13727087

Part#: TMS-2X4-WH

In Stock

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

E30, Z3 Rear Sway Bar Lower Link Reinforcement Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3775

Part#: TSU3075305

In Stock

Sale - Save 60% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.35 USD

Add to Wish List

Qty

Sale - Save 60%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.35 USD

Add to Wish List

This product reinforces the metal swaybar link mounting point on the rear trailing arm. The sheet metal breaks off the trailing arm due to the constant up and down loads being placed on the trailing arm from the swaybar. Problems increase when larger sway bars are used. This product eliminates the problem by thickening the sheet metal and triangulating the mounting point. A good time to install this kit would be when you are doing any rear suspension work, exhaust, or even if you are just doing a differential fluid change. This part requires welding for installation.

Click here for installation instructions.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Turner Motorsport 12x1.5 75mm Full Thread Wheel Stud - Most BMWs (E30...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:184598

Part#: TWH9950X75

In Stock

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Turner Full-Thread Wheel Stud Features:

Black magnesium phosphorous corrosion resistant coating

Long shank for good brake rotor alignment

Heat-treated aircraft-quality alloy steel
75mm is the typical length for a BMW wheel with no wheel spacer or a spacer up to 10mm in width. Depending on your wheel, some stud length may protrude from the wheel. For a shorter stud, see our 55mm full-thread stud.

Sold per stud.

Show More Show Less

Turner Motorsport Die-Cut Stickers - 1" x 7" (pair)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16581

Part#: 149-100-2

In Stock

Sale - Save 20% $ 9.98

This product was last offered at the strikethrough price on
06-13-2026

$ 7.98 USD

Add to Wish List

Qty

Sale - Save 20%

$ 9.98

This product was last offered at the strikethrough price on
06-13-2026

$ 7.98 USD

Add to Wish List

These understated black and silver die-cut decals are the perfect stealth way to let others know performance is what your BMW is about. 1" x 7" die-cut vinyl.

Turner Motorsport vinyl graphics are made from high performance cast graphic film with a UV resistant clear coat which has superior resistance to sunlight and adhesive longevity. The Turner Motorsport Logo is printed in super high quality vinyl inks giving the decal a high quality professional look. We currently offer the Turner Motorsport logo in silver with gloss black trim. As used on our Turner Motorsport Project Cars.

These stickers are designed to match our official Turner Motorsport windshield banners found here.

Sold in pairs.

Show More Show Less

17mm 12x1.5 Silver Zinc-Coated Wheel Nut - Single

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4044

Part#: L30038

In Stock

Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

17mm lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size. The zinc finish is durable and bright so your eye catches it quick (important during fast pitstop tire changes). 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels. If you have a small diameter bolt bore on your wheels, try our compact 19mm wheel nuts.

Priced per nut.

Show More Show Less

Turner Motorsport 12x1.5 55mm Full Thread Wheel Stud - Most BMWs (E30...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:184600

Part#: TWH9950X55

In Stock

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.99 USD

Limited Qty Sale

Add to Wish List

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Turner Full-Thread Wheel Stud Features:

Black magnesium phosphorous corrosion resistant coating

Long shank for good brake rotor alignment

Heat-treated aircraft-quality alloy steel
55mm is a very short wheel stud. Refer to our detailed measurements in the image below. You have to ensure that enough of the stud is sticking out from the hub to fit with: your brake rotor hat and wheel thickness, plus at least 10mm of nut engagement. For a longer stud, see our 75mm and 90mm full-thread stud.

Sold per stud.

Show More Show Less

17mm 12x1.5 Turner Black Zinc-Coated Wheel Nut - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:553900

Part#: D95-ZNNITKT1

In Stock

Sale - Save 15% $ 4.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 4.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.24 USD

Add to Wish List

17mm black lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size. The black finish is durable, corrosion-resistant, and stealthy so it blends in with dark-colored wheels. BMW designed their wheels to use a black bolt so more of the silver design 'pops' or is more eye-catching. These black wheel nuts preserve that effect. 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels. If you have a small diameter bolt bore on your wheels, try our compact 19mm wheel nuts.

Priced per nut.17mm black lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This is a super tough wheel stud nut in a standard 17mm size. The black finish is durable, corrosion-resistant, and stealthy so it blends in with dark-colored wheels. BMW designed their wheels to use a black bolt so more of the silver design 'pops' or is more eye-catching. These black wheel nuts preserve that effect. 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels. If you have a small diameter bolt bore on your wheels, try our compact 19mm wheel nuts.

Priced per pair.

Show More Show Less

Turner Motorsport 12x1.5 Full Thread Wheel Stud - Most BMWs 1984-2011...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:339021

Part#: TWH9950X

In Stock

Sale - Save 42% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 10.99 USD

Add to Wish List

Sale - Save 42%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 10.99 USD

Add to Wish List

55MM, 75MM, 90MM LENGTHS
Black phosphorous corrosion resistant coating
"OEM" appearance
Full-length threads for more nut engagement in tight spaces
Long shank for good brake rotor alignment
Heat-treated aircraft quality alloy steel

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.

Show More Show Less

Stainless Steel Weld-In Oxygen Sensor Bung - M18x1.5mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587345

Part#: TMS02BUNGKT

In Stock

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Finish your custom exhaust with this T304 stainless steel weld-in oxygen sensor bung. PART DESIGN CNC-cut from T304 Stainless Steel for corrosion resistance Radiused to match 2.50"-3.00" OD tubing for ease of welding Threaded for M18x1.5mm RH oxygen sensors INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

OEM Style Hose Clamps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338927

Part#: HOSE-CLAMPS

In Stock

Sale - Save 3% $ 3.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3.87 USD

Add to Wish List

Sale - Save 3%

$ 3.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3.87 USD

Add to Wish List

Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Show More Show Less

Universal Exhaust Clamp - 64.5mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587334

Part#: TMS645ECKT

In Stock

Sale - Save 25% $ 16.99

This product was last offered at the strikethrough price on
06-14-2026

$ 12.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 16.99

This product was last offered at the strikethrough price on
06-14-2026

$ 12.74 USD

Add to Wish List

This corrosion-resistant exhaust clamp is made from 430 stainless steel and is perfect for any custom exhaust job.

Rod End Boot (14-18mm) - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599632

Part#: RERS3

In Stock

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Silver 19mm M12x1.5mm Turner Race Wheel Nut

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
- Designed for use with stud-converted cars, will not fit stock vehicles!

T#:3137

Part#: TWH9952R19

In Stock

Sale - Save 67% $ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.67 USD

Add to Wish List

Qty

Sale - Save 67%

$ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.67 USD

Add to Wish List

Turner Motorsport's five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a chrome coating and they incorporate several innovative features. The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it's far too easy to start the threads with the nut being crooked. The 19mm head of the nut is slightly rounded to help the socket find its position. The chrome plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track. Features: Developed for our Grand-Am / Continental race team High grade steel to withstand the extreme abuse of air guns and race conditions Bright chrome plating to help tire changer zoom in on their target quickly and accurately Minimal plating won't result in excess coating wearing off and "gumming up" the threads 19mm hex to prevent rounding off Rounded top for fast socket engagement Recessed threads to aid in fast nut-to-stud alignment without cross threading We recommend using with Turner Motorsport bullet nose dry-lube wheel studs Price is per nut.

Show More Show Less

Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (s...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338593

Part#: TMS16545

In Stock

Sale - Save 40% $ 15.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 9.64 USD

Add to Wish List

Sale - Save 40%

$ 15.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 9.64 USD

Add to Wish List

These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.

+ Emblem Application Specifics

(click here to check your car)

These black satin wheel bolts fit the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2011 E63 BMW 645ci 650i M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster
2002-6/2006 R50 MINI MINI Cooper
2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-6/2006 R53 MINI MINI Cooper S

Show More Show Less

Turner Motorsport License Plate Frame

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:302055

Part#: LIC-WW-WHITE

Ships in 1-2 days

Sale - Save 25% $ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

There is no better place to show your love for a particular company than on your License Plate Frame. These Turner Motorsports License Plate Frames are perfect for your vehicle if you have a special place in your heart for Turner. If you love the aftermarket automotive industry and the products that we create and offer, why not show us some love with this new plate frame.

Show More Show Less

Turner Motorsport Racing Sticker Pack - Choose Your Color

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41492594

Part#: TMSSTICKERPK

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD

Add to Wish List

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD

Add to Wish List

We race our BMWs and we want to help you race your own! Sign up for our Race Credit Program and take advantage of in-store credit to help keep you and your BMW on track.

19mm 12x1.5 Turner Silver Zinc-Coated Compact Wheel Nut

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:178007

Part#: TWH9952345

Ships on Aug 4, 2026

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.99 USD

Add to Wish List

19mm compact lug nut to fit 12x1.5 thread wheel studs (common for most BMWs made before 2012). This wheel nut has a reduced outer flange for a more compact and minimal fitment. On many wheels, the hole for the lugbolt or lugnut is a very narrow diameter. Not even the stock lugbolt will fit through and these wheels often come with their own lugbolts. Then when adding studs to the car the options for a small diameter lug nut are very limited. We ran into this problem over and over and finally found a solution! These compact lugs have all of the material of a 19mm nut but without the flange of a standard wheel nut. For this reason we do not recommend using these on a wheel that normally takes a standard bolt seat (the seat is very important to the strength and integrity of the design). But for wheels that are designed to use a small seat, these are the solution! Bright and durable zinc finish makes them easy to spot during fast pitstop tire changes.

Priced per nut.
Thin-wall 19mm socket may be required depending on your wheel design.

Show More Show Less