BMW Engine Parts for BMW 3 Series E30 (1984-1991)

The No-Compromise Oil Pan for Your 24V E30 Build

Every E30 swap story starts the same way: you want the reliability and power of a modern BMW 24V engine - M50, M52, S50, or S52 - but without heavy modifications or a list of oil pan parts that are no longer available(NLA). You’ve read the forums, seen the DIYs, and done the math. And you’re still faced with the same question: how am I going to find all of these parts and make them work?

That’s exactly the problem we set out to solve.

At Turner Motorsport, we’ve been building BMWs for decades. We've performed the swaps, turned the wrenches, and taken the laps. The Turner Fabricated Oil Pan was born out of that experience, an enthusiast-engineered solution that eliminates the guesswork and lets you focus on what really matters: driving.

We designed this oil pan from the ground up to support 24V engine swaps into the E30 chassis, with zero permanent modifications.

Crafted from TIG-welded 5052 aluminum, this pan is as durable as it is lightweight. The brushed anodized finish adds a subtle shine under the hood and guards against corrosion for long-term reliability. Inside, we’ve integrated full-length oil control baffles with trap doors, ensuring your oil stays where it needs to be, even under the most aggressive acceleration, braking, and cornering.

The low-profile design is perfect for lowered cars, and the 8 mm-thick flange ensures a proper seal with the factory gasket. We didn’t stop there, every pan includes a billet aluminum oil pickup with an integrated stainless mesh screen that’s fully serviceable, a 304 stainless steel dipstick tube, and a billet rear transmission plate that allows you to utilize the lower mounting holes, unlike the stock E34 pan.

Whether you're building a high-performance street car, a dedicated track weapon, or a clean restomod, this oil pan offers OEM-level integration with aftermarket performance. It’s the cleanest, easiest, and most effective way to run a 24V engine in your E30 — built by BMW lovers, for BMW lovers.

Design:

Fully TIG-welded 5052 aluminum construction
Brushed anodized finish for a clean look and corrosion resistance
Engineered specifically for M5X/S5X engines in the BMW E30 chassis
Front-sump design clears the factory E30 subframe, no cutting or modification required
Designed and tested in-house by BMW enthusiasts
Features:

Built-in oil control baffles with trap doors to prevent starvation under cornering
Low-profile design for maximum ground clearance - perfect for lowered cars
Billet aluminum oil pickup with integrated stainless mesh screen - fully serviceable
8mm thick flange ensures a reliable seal with OEM gasket
Works with all standard 24V swap motor mounts
3/8" NPT port for turbo oil drain and 1/4" NPT for OBD2 CCV drain
Compatible with G260 and ZF transmissions
Stainless steel dipstick tube (304) included for strength and appearance
Utilizes E36 Dipstick (P# - 11431427993)
Kit Contents:

Turner Fabricated Oil Pan
Billet Rear Mounting Plate
304SS Dipstick Tube with Mounting Hardware
Billet Aluminum Oil Pickup
Optional: Oil Pan Gasket, Oil Filter, and Motor Oil
Optional: Complete Install Hardware Kit
Why It Works:

Direct fitment for M5X/S5X into E30, no cutting or fabrication required
Maximum clearance for front subframe, steering rack, and lowered suspension setups
Track-proven baffling to prevent oil starvation under load
Transmission compatibility with Getrag and ZF gearboxes
Built by enthusiasts, designed and tested in-house on real cars
Please note this will require an oil pump from M50/M52/S50/S52, M52TU, M54, and S54 oil pumps will need to be replaced with a single vanos oil pump.

Product development:

Our swap pan components are designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or main bearing service!

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

This set of OEM gaskets covers everything you might need when re-sealing the bottom-end of the E30 M3's S14 engine. Using a complete gasket set will save you time and money if you have the engine out of the car and are performing any major repairs with the oil pan and timing covers off the motor. This is the correct S14 bottom-end gasket set, not a re-packaged M10 kit.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199063282large timing rail lower seal, 10x2

071199631303engine block plug gasket ring, A12x15.5

071199631511oil drain plug gasket ring, A12x17

071199632002block coolant drain gasket ring, A14x18

111317279741upper oil pan gasket

111317279831lower oil pan gasket

111413083421front crankshaft shaft seal, 44x60x10

111413126161timing cover gasket, left

111413126171timing cover gasket, right

111417279751rear main seal cover gasket

111422495331rear main seal, 90x110x12

114112504212oil pump hose o-ring

114213126071oil filter housing gasket

115113096921water pump profile gasket

126112771291oil sender gasket ring, 40x4

This item fits the following BMWs:
1987-1992 E30 BMW M3 2.3L or 2.5L conversion

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

• Valve cover gasket

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

We also offer the complete E30 M3 valve cover gasket set

This item fits the following BMWs:
BMW E30 3 Series - M3