Timing Belt Tensioner Roller

2X Entries Into Our F80 M3 Sweepstakes

T#:372966

Part#: 11311468743

Ships in 1 Business Day

$ 27.99

This product was last offered at the strikethrough price on
05-07-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

If some slop develops in your belt because of a poor tensioner, the timing set can skip a tooth, causing catastrophic damage and potentially ruining your engine.

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

T#:577966

Part#: E30_M10M_TRANS

In Stock at Vendor

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well.

Show More Show Less

Elring Cylinder Head Gasket Set - E30, E36 M42 1.8L (up to 09/1992) ...

2X Entries Into Our F80 M3 Sweepstakes

T#:381069

Part#: 11129063333

Ships in 1 Business Day

$ 210.99

This product was last offered at the strikethrough price on
05-07-2026

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Standard bore, a complete gasket set

Rein Piston Rings - Set - Single Piston - E30, E36

2X Entries Into Our F80 M3 Sweepstakes

T#:591604

Part#: 11251727461

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Replace your worn out piston rings with OE replacements - 84.000mm

Bosch Starter Motor - E30 325e 325es E28 528e E21 323i

T#:2278

Part#: SR43X

Ships in 1 Business Day

$ 258.99

This product was last offered at the strikethrough price on
05-07-2026

$ 252.99 USD

Add to Wish List

Qty

$ 252.99 USD

Add to Wish List

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products.

This genuine Bosch Starter fits the following BMWs:
1984-1985 E30 3 Series 323i 325e 325es
1982-12/1986 E28 5 Series 528e
1977-1983E21 3 Series 320/6 323i

Includes $45.00 core charge to be refunded on return of your rebuildable core.

Show More Show Less

Febi timing chain - E30, E36, Z3

We Price Match - Give Us A Call or Chat!

T#:381709

Part#: 11311247160

Ships in 1 Business Day

$ 138.99

This product was last offered at the strikethrough price on
05-07-2026

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

Replacement timing chain for required maintenance

Cynlider Head Gasket

1,80MM(+0,3)

T#:13957889

Part#: 11121734214

Ships in 1 Business Day

$ 126.09 USD

Add to Wish List

Qty

$ 126.09 USD

Add to Wish List

Febi Camshaft - E30, E34

We Price Match - Give Us A Call or Chat!

T#:19082

Part#: 11311716138

Ships in 2 Business Days

$ 368.34

This product was last offered at the strikethrough price on
05-15-2026

$ 292.43 USD

Add to Wish List

Qty

$ 292.43 USD

Add to Wish List

CAMSHAFT 11311716138 Manufactured by Febi

This item fits the following BMWs:
BMW 3 Series - 325i, 325i Convertible, 325is, 325ix
BMW 5 Series - 525i

--.

Show More Show Less

Victor Reinz Cylinder Head Gasket Kit - E30, E34

T#:366922

Part#: 11129059240

Ships in 2 Business Days

$ 507.57

This product was last offered at the strikethrough price on
08-26-2026

$ 431.09 USD

Add to Wish List

Qty

$ 431.09 USD

Add to Wish List

Head gasket with all required accompanying gaskets for a proper cylinder head installation

DeatschWerks Performance Fuel Injector Set - 440cc

For Custom Applications - Will require additional tuning or modifications.

T#:6151331

Part#: 18U-09-0440-4

Ships in 2 Business Days

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

For tuners and engine builders, the DeatschWerks 18U-09-0440-4 represents a highly predictable and well-characterized fueling solution.

AAF M20 Oil Pan Baffle (BAFFLE ONLY) - E30

For model years 1984-1991

T#:7593089

Part#: 11619

In Stock at Vendor

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.

Show More Show Less

Elring Crankcase Gasket Set - E30, E36

2X Entries Into Our F80 M3 Sweepstakes

T#:596397

Part#: 11111727595

Ships in 1 Business Day

$ 118.99

This product was last offered at the strikethrough price on
04-15-2026

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Address pesky oil leaks with this gasket set from BMW

DeatschWerks Performance Fuel Injector Set - 550cc

For Custom Applications - Will require additional tuning or modifications.

T#:6151335

Part#: 18U-09-0550-6

Ships in 2 Business Days

$ 539.00 USD

Add to Wish List

Qty

$ 539.00 USD

Add to Wish List

The DeatschWerks 550cc Fuel Injector Kit provides the essential fueling foundation required for moderate forced induction or high-output naturally aspirated builds.

Revshift Polyurethane Engine Mounts - 95A - E30 24V Swap

T#:1105934

Part#: PMM-24V-95A

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap with an E21, 2002tii, or VW MK2 Golf brake booster. They use the OEM motor mount bolt holes on the E30 subframe. The mounts are angled with offset bolts to position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...

T#:5389791

Part#: 9-401-1001

In Stock at Vendor

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Cylinder Leak Tester

T#:5498460

Part#: 75500

Ships in 1 Business Day

$ 48.26 USD

Add to Wish List

Qty

$ 48.26 USD

Add to Wish List

Quickly pinpoint or check for combustion leaks.

Victor Reinz Head Gasket Set - E28 E30

For vehicles with production date from 07/88

T#:596096

Part#: 11121730885

Ships in 2 Business Days

$ 167.99

This product was last offered at the strikethrough price on
08-13-2026

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Elring Cylinder Head Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:19411

Part#: 11121722734

Ships in 1 Business Day

$ 35.99

This product was last offered at the strikethrough price on
05-07-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

CYLINDER HEAD GASKET ASBESTO 11121722734

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

Fuel Pump

For vehicle's with the production date 11/1986 to 09/1987

2X Entries Into Our F80 M3 Sweepstakes

T#:591940

Part#: 16141179232

In Stock

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Under car mounted fuel pump

E36 M3 S50 Aftermarket Timing Chain Tensioner. Upgrade for E24 M6, E2...

We Price Match - Give Us A Call or Chat!

T#:239

Part#: 11311405081

Ships in 1 Business Day

$ 395.99

This product was last offered at the strikethrough price on
05-07-2026

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

The timing chain tensioner from the 1995 E36 M3 is a great upgrade for other Motorsport models - 1988-1991 E30 M3 and 1989-1995 E34 M5! This tensioner virtually eliminates the cold start-up engine rattle so common with the S14 and S38 engines. It makes the whole engine quieter and smoother. Any new tensioner will accomplish that but the S50 tensioner has several new features that make it superior to the original design. This unit also has a internally loaded spring, so installation is much easier than the old style tensioner (no need to squeeze the spring and hold it while installing). Includes oil seal ring (not pictured).

Aftermarket Febi brand.

This item fits the following BMWs:
1985-1989 E24 BMW M635CSi M6 - M88/3, S38B35 engine
1988 E28 BMW M5 - M88/3, S38B35 engine
1988-1991 E30 BMW M3 - S14 engine
1989-1995 E34 BMW M5 - S38 engine
1995 E36 BMW M3 - S50B30US engine
1994-1999 E36 BMW M3 Euro - S50B30 and S50B32 engines

Show More Show Less

BMW Rod Bolt Stretch Gauge with Billet Body & Thumb Hold

T#:4309

Part#: 100-9942

In Stock at Vendor

$ 216.99

This product was last offered at the strikethrough price on
03-05-2026

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

Head Gasket +0.3 Mm (1.80 Mm)

T#:593762

Part#: 11121734280

Ships in 8 Business Days

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

Replacement Head Gasket from Victor Reinz

Conti Tech Rubber High-Pressure Hose

We Price Match - Give Us A Call or Chat!

T#:378830

Part#: N0202811

Ships in 3 Business Days

$ 34.22 USD

Add to Wish List

Qty

$ 34.22 USD

Add to Wish List

7mm O.D X 2.5mm I.D.

3 Arm Engine Cylinder Hone - 8"

T#:641408

Part#: 2833D

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Hone and remove glaze from engine cylinders from 3/4" to 4" and 19mm to 101mm in diameter

E30 Fuel Tank Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:9126160

Part#: 16121180402

Ships in 1 Business Day

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

Hose that runs from the filler neck to the tank

Elring Head Gasket Set - E30 M3

2X Entries Into Our F80 M3 Sweepstakes

T#:593547

Part#: 11121316992

Ships in 1 Business Day

$ 362.99

This product was last offered at the strikethrough price on
05-07-2026

$ 352.99 USD

Add to Wish List

Qty

$ 352.99 USD

Add to Wish List

Includes all the gaskets and seals needed when rebuilding the S14 cylinder head, along with the head gasket. This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares. This item fits the following BMWs: 1987-1991 E30 BMW M3

Show More Show Less

Deluxe Compression Tester

T#:585065

Part#: OTC5605

Ships in 6 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The only way to check compression is with a compression tester like this one.

Hella Air Horn Kit

T#:592708

Part#: 3001651

Ships in 1 Business Day

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Get noticed with this air horn kit from Hella!

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

Cylinder Head Gasket

T#:593760

Part#: 11121734279

Ships in 2 Business Days

$ 40.99

This product was last offered at the strikethrough price on
05-07-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Replacement Cylinder Head Gasket from Victor Reinz

Vacuum Gauge and Fuel Pump Tester

T#:5498468

Part#: 20300

Ships in 1 Business Day

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A must have

Febi Timing Chain Tensioner

We Price Match - Give Us A Call or Chat!

T#:359495

Part#: 11311743187

Ships in 1 Business Day

$ 146.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

This timing chain tensioner keeps the tension rail properly positioned on the BMW M42 and M44 4 cylinder engine.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1999 Z3 BMW Z3 1.9

Show More Show Less

OEM Victor Reinz Head Gasket Set - E30 M3 2.3L

T#:288

Part#: 11121316992

Ships in 2 Business Days

$ 271.99 USD

Add to Wish List

Qty

$ 271.99 USD

Add to Wish List

Includes all the gaskets and seals needed when rebuilding the S14 cylinder head, along with the head gasket. This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares. If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time. This item fits the following BMWs: 1987-1991 E30 BMW M3

Show More Show Less

Valve Cover Gasket

T#:593917

Part#: 11121734276

Ships in 8 Business Days

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Crankshaft Seal - Front

T#:594918

Part#: 11141439570

In Stock at Vendor

$ 24.57

This product was last offered at the strikethrough price on
06-03-2026

$ 24.51 USD

Add to Wish List

Qty

$ 24.51 USD

Add to Wish List

The front seal or crankshaft seal is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the pulley surfaces. Replace yours and keep your oil in your engine.

Show More Show Less

Hella Crankshaft Bearing Set - Standard Size - 55.0mm

T#:27638781

Part#: 11210666100

Ships in 1 Business Day

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Often called main bearings, crankshaft bearing shells sit between the rotating assembly and the engine block. They allow the crankshaft to rotate freely, but are prone to wear from deterioration and lack of lubrication.

This complete set consists of nine bearings, enough to fill each journal.

If you're overhauling your M10, choose Hella crankshaft-bearing shells for a lasting solution.

Show More Show Less

OEM Schaeffler Alternator Bearing - BMW E21 E30 E36 E12 E28 E34 E23 E...

T#:41965072

Part#: 6201-Z

Back Ordered

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Offered by OEM Schaeffler, this bearing replaces BMW part number 12311739203, which is found in numerous BMW alternators manufactured prior to 1996. This bearing helps to stabilize the shaft of the alternator, allowing it to spin freely. If you are experiencing a loud squeaking or grinding noise from your alternator, there is a good chance one of the internal bearings has failed and needs to be replaced.

Show More Show Less

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

CP Carrillo Forged Piston Set - BMW M20B25

T#:23847551

Part#: CP-FPS-M20-B25

Ships in 2 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

Elevate Your Engine's Performance with Customizable CP Pistons

When it comes to optimizing your engine's performance, flexibility is key. That's why we offer a range of CP pistons with customizable compression ratios to cater to your specific needs. Whether you're embarking on a basic engine rebuild, planning to implement a low boost turbo or supercharger, or aiming to maximize power with high-performance camshafts, we have the ideal piston solution for you.

Our collaboration with CP ensures that you'll receive pistons of the highest quality, meticulously designed to meet the most demanding expectations. These pistons are a top choice for high-performance and racing engines.

We maintain a diverse selection of compression ratios in stock, making it convenient to find the right fit for your project. And if you require a custom piston application, our efficient service has you covered.

BORE: 84mm
Rod Length: 135mm
Compression Ratio: 8.5:1

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Magnetic Pickup Tool

T#:640838

Part#: 1976

Ships in 2 Business Days

$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

T#:577964

Part#: E30_M42M_TRANS

Ships in 2 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M42 powered e30s. Under hard braking the stock mounts allow the M42 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Fitment: 1990-1991 E30 BMW 318i, 318is, 318ic

Show More Show Less

Genuine BMW Oil Filter Cap - Aluminum Oil Filter Housings

T#:35266

Part#: 11421711075

Ships in 4 Business Days

10% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Qty

10% off MSRP

$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Genuine BMW Oil Filter Cover
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E30,E34,E36,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
M30,M42,M50,S50,S52,S54

Show More Show Less