Turner Motorsport for BMW 3 Series E30 (1984-1991)

BMW E30 Frame Rail Reinforcement Kit from Turner Motorsport addresses a critical weak point in the chassis to enhance the structural integrity of your BMW. Leveraging two decades of racing expertise, Turner Motorsport delivers performance parts that combine exceptional quality, value, and functionality. This reinforcement kit is designed to strengthen the frame rails of the E30, improving handling and durability for a more responsive driving experience.

• Enhanced Structural Integrity: Reinforces the frame rails to address common weak points in the E30 chassis.
• Improved Handling: Stiffens the underside of the vehicle for better road handling and stability.
• Durable Construction: Built to withstand the demands of both street and track use.
• Expert Design: Developed with insights from Turner Motorsport’s extensive racing experience.

This kit is essential for maintaining your BMW E30's performance and reliability over time.

Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer e30, e36, and e46 owners similar levels of handling precision and control for the track and street, but weren’t satisfied with the other options out there.  Instead of a Delrin® bushing or unsealed spherical bearing alone, we selected an oversized sealed greaseable spherical monoball to offer unparalleled durability and precision, but designed a Delrin® adapter sleeve to help isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. While race-ready, our hybrid Delrin®/monoball control arm bearings are more at home on the street than other kits that are advertised as “race-only” bearings. We did extensive street, autocross, and track testing to ensure the spherical bearing used in this bushing design excelled in each setting.

The stock rubber bushings, even those found in the M3, allow significant fore/aft movement of the front wheels to help absorb road impacts, especially when being pushed hard.  This soft flexible design maximizes daily driving comfort, but also allows considerable alignment change.  This unwanted deflection stands between you and a crisp, confidence-inspiring driving experience.  The advantage of a monoball bearing is that it will not deflect under load, eliminating all unwanted deflection while still allowing complete freedom of movement in the desired angles. What you get is superior steering precision with better handling from more consistent alignment and direct braking feedback, with exceptional service life.  Thanks to the Delrin® insert and double lip seals, there's none of the extra noise or reduced service life often found on other spherical bearings.

In short, if you're seeking front control arm bushings that offer precise, predictable handling, crisper braking feel, with a long service life free from noise - look no further. We have you covered.

Watch to learn more about Turner Monoball Bushings

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum with a pre-installed grease fitting and grease distribution channels making this a serviceable design
• Knurled for smooth press fit in a wide variance in “lollipop” dimensions. Want front control arm monoballs pre-installed in lollipop brackets? Click here. 

Bearing

• A high quality sealed bearing with Delrin® inserts. Delrin® was chosen due to durability under pressure, while still soft enough to create a perfect play-free fitment on the control arm.
• Replaceable for infinite service life - no need to replace the entire mount in the event a bearing happens to fail.

Includes new hardware. Grease before installation and with each oil service with high quality Moly grease for maximum service life. Need a grease fitting tool?

Installation is relatively easy - see our instructions here.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Complete your 24V swap with an intake designed specifically for the job. The Turner 24V Swap Heat-Shield Intake is engineered for E30 engine conversions, delivering cold, dense airflow in tight engine bays while retaining use of the factory air duct.

Most swaps leave you with two less-than-ideal choices: bolt a filter directly to the MAF and suck in hot under-hood air, or cobble together a universal intake that still lacks proper heat shielding. Our swap intake eliminates those compromises.

Our low-profile, heat-shielded design isolates the filter from radiant engine heat, works seamlessly with the stock 3.0" MAF, and supports factory CCV/ICV routing. The result is OEM-like fitment with modern airflow efficiency, no wiring hacks, no vacuum headaches, just a clean, reliable intake solution built for your swap.

Key features:

Heat shield designed to fit M20 and M5X swapped cars — mounts to the frame rail and ties into the ABS mount for rock-solid positioning. Creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains stock 3.0" MAF, no adapters needed to run the factory OBD1/OBD2 MAF in a factory-like location.
Designed to preserve stock CCV and ICV hoses for M50/M52 setups, this keeps the typical manifold and crank-vents intact, thereby avoiding vacuum and idle headaches common in swaps.
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:

Specifically engineered to work with common 24V conversions where space is tight and retaining OEM-style plumbing is desired. Mounts to factory frame rail/ABS brackets, minimal modification required.

M50/M52 engines are among the most popular 24V choices thanks to robust iron blocks, widespread availability, and strong aftermarket support, making them an excellent pairing for turbo or naturally aspirated builds. Keeping the stock MAF and CCV/ICV routing reduces the troubleshooting surface during install and helps complete your swap faster.

Kit Contents:

Heat Shield
Hi-flow Turner Air Filter
Silicone Throttle Body Boot with plug
Maf Coupler
Inlet/Air Filter Adapter
Inlet Tube Bracket
Hardware for installation
Product Development:

Our Turner 24v Intake System was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in-ground dyno and in-house Superflow SF-750 Flowbench.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

• Enhanced Appearance: Mirror finish provides a polished, high-end look.
• Durable Construction: Double-wall design for long-lasting performance.
• Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
• Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
• Easy Installation: Designed for straightforward installation on compatible vehicles.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

High Performance air filter, replacement filter for Turner Motorsport intakes, or great for your custom intake project. 

Filter Dimension 

• 178MM length 
• 127MM base
• 75MM inlet 

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Robust chassis-mounted skid plate with multi-piece structural reinforcements. Compatible with M20, and M5x/S5x swapped cars that have the low-hanging E34 swap oil pan!

We've all heard the E30 horror stories of smashed oil pans and engine damage that follows. You have a few options, either you drive extremely carefully and hope nothing happens, or take the proactive approach and buy a quality skid plate.

Our skid plate offers a range of features, including chassis mounting, structural reinforcement, compatibility with 24v swaps, provisions for airflow, and acting as a splash guard. Whether shielding against everyday road hazards or ensuring stability on the track, this skid plate serves as a comprehensive protection plan to keep your E30 secure and road-ready.

In addition to its protective role, the skid plate contributes to the overall quality of your vehicle by enhancing chassis stiffness. By providing structural reinforcement through its tubular steel and A36 steel supports, the skid plate becomes an integral part of your car's framework. This added stiffness can improve handling and stability, ensuring that your vehicle responds confidently to different driving conditions.

Featuring two 1.5" outer diameter A36 steel supports that mount directly on the chassis rails, these serve as front mounts for the provided A36 tubular steel "halo," which securely mounts to the front subframe. When bolted together, the uprights and tubular halo double as a rigid front subframe brace, providing an additional bonus.

Developed on both a stock 325is (M20) and an S54 swap car, our engineers dedicated time to ensure compatibility with both standard and 24v swapped cars. Constructed with tubular steel and 1/8" thick 5052 aluminum, our skid plate comes as a comprehensive 4-piece kit with included hardware for easy installation and incredible durability.

Features and benefits:

Rugged, sophisticated, good looking
Maximum underbody protection
Compatible with 24v swap cars
Doubles as front subframe brace
Includes installation hardware
Chassis Mounted Halo - 12lbs
Skid Plate - 8lbs
Design:

Laser-etched front design for proper engine bay airflow
Frame rail mounted supports
Tubular brace to "halo" around the oil pan
1.0" and 1.5" A36 tubular construction
1/8" thick solid 5052 aluminum sheet metal skid plate
Compatibility:

At this time the confirmed vehicle fitment is standard M20 cars (325i, IS, E, and ES) and all E30's sporting a 24v swap with the E34 525 M50 oil pan.
Though we are happy with the fitment and utility of our skid plate we are not done testing. If you or someone you know has a 4-cylinder or non-BMW engine swap please reach out to partner and help expand our fitment to all compatible E30s.
Cars to be confirmed - M10, M40/M42, S14, and other engine swaps with fabricated oil pans
- Click HERE for Installation Instructions -

Product Development:

Our E30 chassis-mounted skid plate was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Lightweight flywheel for quicker, effortless revs that improve throttle response and free up lost horsepower. Tested and approved by our engineering team at Turner Motorsport. Tested in early, late, ETA and IS model E30s for confirmed fitment.

Introducing our Turner Flywheel: an ingenious blend of lightweight design, rich features, and remarkable strength! Crafted from 4140 HT Steel, this flywheel is precision-machined from a solid piece, ensuring unmatched durability. By strategically trimming excess weight from its original design, we've achieved a significant reduction in weight, giving new life to your M20 engine. With upgraded efficiency, your M20 can now swiftly spin to high RPMs, unleashing the full power and prowess of this formidable engine. Our flywheel features a ring gear profile compatible with all starters, alongside a reference tab tailored for early cars equipped with bellhousing-mounted sensor crank position detection.

Do you have an early model transmission with the crank sensors on the bellhousing? Maybe you have a late 325is with the crank sensor on the front of the engine, or maybe you have a 1988 super ETA. No matter which E30 model you have, our flywheel is the perfect choice for you.

During the engineering process we encountered the full spectrum of M20 and flywheel combinations. Early cars with bellhousing crank sensors, late cars with front mounting crank sensors and even a super ETA. On this adventure we found both early and late single mass flywheels and even the dual mass that we thought for sure was just a myth. At first we were hesitant that we could make one flywheel to fit them all but with the persistence of our engineering team(fleet of E30 enthusiasts) we can proudly say our M20 flywheel does in fact fit all engine and transmission applications you can think of.

Features and benefits:

Fits early and late models with M20
Fits shallow and deep bellhousing transmissions
Ring gear suited for both starters (P# 12411726504 + 12411361874)
Heavier than other lightweight flywheels, lighter than OEM, its like the Goldie Locks of flywheels - its just right
Reference pin for bellhousing crank sensor
Strong Single-Piece 4140 HT Steel construction
Designed to be used with factory and OE clutches
Weight Comparisons:

​Factory single mass flywheel EARLY (11221705046) - 23.69 lbs.
Factory single mass flywheel LATE (11221706573) - 18.74 lbs.
Dual mass flywheel (21211225979) - 27.56 lbs.
Turner flywheel - 14 lbs.
What you need:

Short bellhousing transmissions (I/IS) - Throw-out bearing P# 21517521471
Tall bellhousing transmission (ETA) - Throw-out bearing P# 21511204525

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

• Adjustable to neutralize preload on sway bar (balanced handling)
• The ability to set sway bar geometry and clearance
• Low friction ball joints
• High articulation
• Direct replacement for OEM sway bar links
• Watertight boot seal
• Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or main bearing service!