BMW Suspension Parts for BMW 8 Series E31 (1991-1997)

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

BMW E31 Upper Rear Wishbone Ball Joint Bushing (Pair) provides an efficient and affordable solution for replacing the ball joint bushings in the upper rear control arm of your BMW E31. Unlike the costly full control arm replacement offered by BMW, this bushing set offers high-quality performance at a fraction of the price.

This bushing pair features a well-engineered rubber boot that has been designed to sit flush with the metal surface of the bushing, allowing for easy installation using standard press tools or a socket. The innovative design eliminates the need for a custom press tool and helps prevent damage to the boot during installation.

Made from durable polyurethane rubber, these bushings are built to withstand the elements and provide long-lasting performance. With OEM-level precision, they ensure a perfect fit and hassle-free, plug-and-play installation on the BMW E31.

• Cost-effective solution compared to replacing the full control arm
• Easy installation with standard press tools or a socket
• No need for a custom press tool, reducing the risk of damage during installation
• High-quality polyurethane construction for long-term durability
• Designed to meet the weight and stress demands of the BMW E31 platform
• OEM dimensions ensure a precise fit
• Plug-and-play design for simple installation

Sway bar end links connect the sway bar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1984-1991 E30 BMW M3
To 10/1991 E36 BMW 325i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi

BMW E31 Lower Ball Joint Bushing is an essential upgrade for ensuring the long-term performance of your BMW’s suspension system. The original ball joint bushings supplied by BMW, specifically the Lemforder bushings, often suffer from premature cracking due to their weak, transparent plastic boots. This deterioration allows dirt and grime to infiltrate, ultimately damaging the bushings and affecting your vehicle's suspension. The new bushing solution uses advanced polyurethane rubber, known for its ability to resist wear and tear from the elements, providing lasting durability.

Engineered with precision, the BMW E31 Lower Ball Joint Bushing is designed specifically to fit the E31 platform, ensuring it handles the vehicle's weight without compromise. The bushing features OEM dimensions for seamless installation, making it a plug-and-play replacement that requires no additional modifications.

• Upgraded with durable, weather-resistant polyurethane rubber
• Eliminates the issues caused by the cracking of original plastic boots
• Precisely engineered to handle the weight and stress of the E31 platform
• Plug-and-play installation with OEM dimensions for easy replacement
• Superior performance and longer lifespan compared to factory bushings
• Enhances overall suspension function and reliability

Genuine BMW Aluminum Front Lower Control Arm - Left - E34 E31 part number 31121138477

Upgrade your vehicle's performance with the Genuine BMW Aluminum Front Lower Control Arm - Left - E34 E31 part number 31121138477. Made for precision and durability, this control arm ensures a smooth and stable ride. Engineered to fit perfectly, it is a direct replacement for your worn-out or damaged control arm. Experience enhanced handling and responsiveness on the road. Buy now and enjoy the benefits of:

• Genuine BMW quality
• Made from durable aluminum
• Ensures precise handling
• Direct replacement for OE part
• Fits E34 and E31 models

Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Collar Nut | Self-Locking is a vital component used in various suspension locations on BMW and MINI vehicles. This 8mm hex nut provides reliable performance and secure fastening for suspension systems.

• Self-Locking Feature: Ensures that the nut remains securely fastened under vibration and stress.
• Durable Construction: Designed to withstand the demands of automotive suspension systems.
• Versatile Use: Suitable for various locations in the suspension system of BMW and MINI vehicles.
• Precision Fit: 8mm hex size for accurate and easy installation.