Clickhere for SI-1 Tech Info
Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!
The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.
K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.
Features:
At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.
Watch to learn how to clean a K&P oil filter
This product fits the following BMWs:
1975-1983 E21 320i
1982-1991 E30 325i
1982-1988 E28 528i 528e
1989-1995 E34 525i
This product was last offered at the strikethrough price on
07-15-2026
This product was last offered at the strikethrough price on
07-15-2026
Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!
The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.
K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.
Features:
At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.
This part fits the following BMWs:
1991 - 1999 E36 Coupe 323i 325is 328i
1993 - 1999 E36 Convertible 323i 325i 328i
1990 - 1999 E36 Sedan 325i 328i
1989 - 1995 E34 525i, 530i,
1998 - 2004 E39 Touring 525i 528i
1996 - 2004 E39 Sedan 525i 528i 530i
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 323i 325i 328i 330i
2002 - 2006 E46 Sedan 325i 325xi 330i 330xi
2000 - 2006 E53 X5 SUV X5 X5 3.0i
K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
All sets of 12 now 10% off regular price!
RedLine 15W50 synthetic motor oil. We have been using RedLine 15w50 Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. The ultimate high-temperature protection in Red Line engine oils recommended for street use. Good for engines that regularly run very high oil temperatures. Best for engines that run large clearances such as air-cooled engines or large-displacement, all-out racing engines that see occasional street use. Provides 25% more viscosity in bearings than petroleum 20W-50s. Not recommended for use in cold climates where temperatures are at or below 10*F or -12*C. Not recommended for street use in production engines that see sustained oil temperatures below 225*F (those engines should use Red Line 10W-30 or 10W-40). Turner Motorsport recommends this oil in the E30 M3 during the summer and for track-use.
This product was last offered at the strikethrough price on
06-16-2026
All sets of 12 now 10% off regular price!
Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.
Features:
Keep your BMW's cooling system in top condition with DEI's Radiator Relief™ Cooling System Flush. This concentrated cleansing agent effectively removes rust and mineral deposits from the radiator core and hose lines, restoring efficiency. Additionally, it dissolves oily residue build-up left by old antifreeze and coolant mixtures, ensuring optimal performance. Simple to use and 100% biodegradable, this flush is recommended for use with distilled water to maintain optimum efficiency. Note that it is intended for a complete coolant flush and should not be added to existing coolant.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
All sets of 12 now 10% off regular price!
Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.
Conforms to BMW LL-01 standards.
This 0W-40 engine oil is ideal for BMW vehicles, offering swift flow throughout the engine for quick starts and enhanced wear protection. Its ester base lubricates engine components with precision, reducing wear and tear, while its detergents and dispersants effectively cleanse deposits, holding them until the next oil change. Specifically formulated for modern road cars and light trucks, it meets the specifications of most late-model BMW models and is also suitable for VW/Audi 500.00,502.00, 503.01, 505.00. Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards, this oil ensures top-notch performance and longevity for your BMW's engine.
This product was last offered at the strikethrough price on
06-15-2026
Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.
All sets of 12 now 10% off regular price!
Red Line 20W50 synthetic motor oil. We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. The ultimate high-temperature protection in Red Line engine oils recommended for street use. Good for engines that regularly run very high oil temperatures. Best for engines that run large clearances such as air-cooled engines or large-displacement, all-out racing engines that see occasional street use. Provides 25% more viscosity in bearings than petroleum 20W-50s. Not recommended for use in cold climates where temperatures are at or below 10*F or -12*C. Not recommended for street use in production engines that see sustained oil temperatures below 225*F (those engines should use Red Line 10W-30 or 10W-40).
