Cylinder Head for BMW 5 Series E34 (1987-1995)

Clear BMW chassis

Please ensure your correct model is selected

BMW makes their cylinder heads from aluminum. While this is beneficial for many reason, they do not react well to overheating. Especially prevalent on older BMW engines, and over-temp situation has been known to cause the head to warp. Turner Motorsport carries Genuine BMW replacement heads and parts to make your next rebuild a success.

Sub-Categories

Sort By:

ARP - Corporate Logo
T#:3606
Part#: 201-4302
In Stock
19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
19% off MSRP
$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3
Show More Show Less
Genuine BMW - Corporate Logo
T#:14514
Part#: 11321748884
Ships in 3 Business Days
$ 44.99 USD
Free Shipping on orders $49 and up
Stock OEM hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less
Genuine BMW - Corporate Logo
T#:16410
Part#: 83300490942
Ships in 3 Business Days
$ 38.99 USD
Free Shipping on orders $49 and up
GENUINE BMW TEMPLATE

ARP - Corporate Logo
T#:189783
Part#: 201-4305
In Stock
$ 271.99

This product was last offered at the strikethrough price on
07-10-2026

$ 271.18 USD
Free Shipping
$ 271.18 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.​

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i
Show More Show Less

Genuine BMW - Corporate Logo
T#:2074
Part#: 11121726478
In Stock
2% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD
Free Shipping on orders $49 and up
This head bolt set includes all 14 torx head bolts. These bolts must be replaced every time the cylinder head is removed as they stretch on installation. These are Genuine BMW bolts with superior quality to the aftermarket brands currently on the market. For forced induction you should have ARP head studs.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325is 325ic 325ix
1982-1988 E28 BMW 528e
1989-1990 E34 BMW 525i
Show More Show Less
Genuine BMW - Corporate Logo
T#:367624
Part#: 11331271429
Ships in 3 Business Days
$ 59.97 USD
Free Shipping on orders $49 and up

For optimal valve train performance in your BMW, replace old rockers when shaft/rocker clearance exceeds specifications. When installing a new cam or rocker shafts, it's recommended to re-machine rocker pads or replace rockers to ensure maximum valve train life. The kit includes rockers and provides benefits such as:

  • Replacement for old rockers with excessive clearance.
  • Ensures maximum valve train life with new cam or rocker shaft installation.
  • Rocker bushings may need honing for proper clearance.
  • Careful inspection of rocker shafts for even wear and replacement if necessary.
  • Avoid installing new rockers with a worn camshaft to extend service life.
  • Comprehensive kit for valve train maintenance in BMW engines.
Show More Show Less

Genuine BMW - Corporate Logo
T#:12893
Part#: 11127583115
In Stock
Sale - Save 6% $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.42 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 57.99

This product was last offered at the strikethrough price on
06-25-2026

$ 54.42 USD
Free Shipping on orders $49 and up
Genuine BMW Cylinder Head Bolt Set - M10X110 for BMW M60,M62,S62 V8 engines. This head bolt set is enough for one cylinder head. 2 sets required per engine.

This item fits the following BMWs:
1983-1995 E34 BMW 530i 540i
1997-2003 E39 BMW 540i M5
1988-1994 E32 BMW 740i 740il
1995-2001 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is
2000-2003 E52 BMW Z8 Roadster
Show More Show Less

ARP - Corporate Logo
T#:379415
Part#: 201-4602
In Stock at Vendor
$ 255.99 USD
Free Shipping
$ 255.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines. 

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. 

This item fits the following BMW Engines:
M30 3.0L 3.4L I6
Show More Show Less

Genuine BMW - Corporate Logo
T#:19361
Part#: 11121735180
Ships in 3 Business Days
4% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping
4% off MSRP
$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD
Free Shipping


Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less
Genuine BMW Camshaft Bearing Bridge - Intake
For vehicles with production date from 09/1994
Genuine BMW - Corporate Logo
T#:21667
Part#: 11121740428
Ships in 3 Business Days
6% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD
Free Shipping
6% off MSRP
$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD
Free Shipping


Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less
Genuine BMW - Corporate Logo
T#:31264
Part#: 11121740163
Ships in 3 Business Days
4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up


Genuine BMW Cover
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less


Genuine BMW - Corporate Logo
T#:222758
Part#: 11331274975
Back Ordered
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Genuine BMW Rocker Arm Shaft - 11331274975

This item fits the following BMW Engines:


Genuine BMW - Corporate Logo
T#:281
Part#: 11341315912
In Stock
Sale - Save 7% $ 39.85

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.25 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 39.85

This product was last offered at the strikethrough price on
07-15-2026

$ 37.25 USD
Free Shipping on orders $49 and up

These Motorsport valve springs are from the Sport Evo 3 model but can be used in all E30 M3s (and others). We found that the stock original valve springs can be too weak when used with upgraded cams and this genuine BMW Motorsport part is an upgrade over the original design. Valve springs also get weaker over time so these are the perfect replacement when refreshing the S14 cylinder head. A weak spring can lead to a burnt valve seat or even a bent valve. These are also the stock springs in the M88/S38 and Euro S50B30.

Priced per valve (price includes 1 inner and 1 outer).

Show More Show Less
Genuine BMW - Corporate Logo
T#:19087
Part#: 11331274963
Ships in 9 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping


Genuine BMW Rocker Arm Shaft Intake Front -
This item fits the following BMW Chassis:
E34

Fits BMW Engines including:
M30


Genuine BMW - Corporate Logo
T#:19100
Part#: 11331274959
Ships in 9 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping


Genuine BMW Rocker Arm Shaft Exhaust Front -
This item fits the following BMW Chassis:
E34

Fits BMW Engines including:
M30


Genuine BMW - Corporate Logo
T#:31265
Part#: 11121740396
Ships in 3 Business Days
$ 15.99 USD
Free Shipping on orders $49 and up


Genuine BMW Connector - M12

This item fits the following BMW Chassis:
E36 M3,E30,E34,E36,E39

Fits BMW Engines including:
M10,M20,M30,M50,M52,S50,S52

Show More Show Less

Genuine BMW - Corporate Logo
T#:31410
Part#: 11127550856
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up


Genuine BMW Washer
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5 X5,E83 X3,E85 Z4,E90,E92,E93

Show More Show Less
Genuine BMW - Corporate Logo
T#:31215
Part#: 11121726241
In Stock
13% off MSRP $ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 2.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.83 USD
Free Shipping on orders $49 and up


Genuine BMW Dowel - D=12,5Mm
This item fits the following BMW Chassis:
E39 M5,E60 M5,E63 M6,E82 1M Coupe,E53 48IS,E30,E34,E36,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW - Corporate Logo
T#:6774
Part#: 11330634125
In Stock
$ 3.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 3.99

This product was last offered at the strikethrough price on
01-28-2026

$ 2.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up


Genuine BMW Compression Spring -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M30


OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:360996
Part#: 11321748884
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less
Genuine BMW - Corporate Logo
T#:367533
Part#: 11120621144
Ships in 3 Business Days
8% off MSRP $ 11.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.00 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 11.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.00 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:22167
Part#: 11121312096
Ships in 3 Business Days
$ 10.99 USD
Free Shipping on orders $49 and up


Genuine BMW Stud Bolt - M6X35
This item fits the following BMW Chassis:
E30 M3,E34 M5,E30,E34

Fits BMW Engines including:
S14,S38



Genuine BMW - Corporate Logo
T#:19606
Part#: 07129908134
Ships in 3 Business Days
$ 5.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.00 USD
Free Shipping on orders $49 and up
$ 4.00 USD
Free Shipping on orders $49 and up


Genuine BMW Stud Bolt -
This item fits the following BMW Chassis:
E30,E34

Genuine BMW - Corporate Logo
T#:34199
Part#: 11330634140
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up


Genuine BMW Washer -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M30


Genuine BMW - Corporate Logo
T#:6776
Part#: 11330634135
Ships in 6 Business Days
$ 2.99 USD
Free Shipping on orders $49 and up


Genuine BMW Spring Washer -

This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M10,M30


Genuine BMW - Corporate Logo
T#:16530
Part#: 11321739299
In Stock
$ 45.89 USD
Free Shipping on orders $49 and up
Stock OEM hydraulic valve lifter for the M42 and M50 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the M50 camshafts.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Price is for one lifter (one per valve).

This item fits the following BMWs:
1992-1995 E36 BMW 318i 318is 318ti 318ic 325i 325is 325ic
1993-1994 E34 BMW 525i
Show More Show Less

Genuine BMW - Corporate Logo
T#:6576
Part#: 11112140435
Back Ordered
$ 13.99 USD
Free Shipping on orders $49 and up


Genuine BMW Threaded Pipe Joint - M20X1,5
This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M20

Ina Rocker Arm - E28, E30, E34
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:557719
Part#: 11331271429
Back Ordered
$ 26.99 USD
Free Shipping on orders $49 and up
Broken rocker arms are a real concern. Replace your broken arm or preventatively replace all of them.