BMW Engine Parts for BMW 5 Series E34 (1987-1995)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:583537
Part#: S5XPISKT
In Stock
Sale - Save 24% $ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping
Sale - Save 24%
$ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:4466
Part#: 11281427252
Ships in 4 Business Days
$ 52.99

This product was last offered at the strikethrough price on
07-15-2026

$ 52.39 USD
Free Shipping
$ 52.39 USD
Free Shipping

This tensioner is for either the Water Pump or Alternator on cars with the mechanical belt tensioner system. Please check to ensure your car does not have the hydraulic tensioner. This tensioner comes with the pulley assembly.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Only for cars with Mechanical belt tensioner systems.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less

Ina - Corporate Logo
T#:378657
Part#: 11317531813
In Stock
$ 73.99 USD
Free Shipping
$ 73.99 USD
Free Shipping

This is an OEM INA Timing Chain Tensioner. Keeping pressure on the timing chain, this keeps the chain from slipping teeth and causing the timing to be off, potentially leading to engine damage. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:337971
Part#: 11311405081
Ships in 3 Business Days
Starting at $ 113.17 USD
Free Shipping
Starting at $ 113.17 USD
Free Shipping
The timing chain tensioner from the 1995 E36 M3 is a great upgrade for other Motorsport models - 1988-1991 E30 M3 and 1989-1995 E34 M5! This tensioner virtually eliminates the cold start-up engine rattle so common with the S14 and S38 engines. It makes the whole engine quieter and smoother. Any new tensioner will accomplish that but the S50 tensioner has several new features that make it superior to the original design. This unit also has a internally loaded spring, so installation is much easier than the old style tensioner (no need to squeeze the spring and hold it while installing). Includes oil seal ring (not pictured).

This item fits the following BMWs:
1985-1989 E24 BMW M635CSi M6 - M88/3, S38B35 engine
1988 E28 BMW M5 - M88/3, S38B35 engine
1988-1991 E30 BMW M3 - S14 engine
1989-1995 E34 BMW M5 - S38 engine
1995 E36 BMW M3 - S50B30US engine
1994-1999 E36 BMW M3 Euro - S50B30 and S50B32 engines
Show More Show Less
Ina - Corporate Logo
T#:579884
Part#: 5510013100
Ships in 4 Business Days
$ 113.17 USD
Free Shipping
$ 113.17 USD
Free Shipping
Located on the lower rear timing chain guide rail

OEM INA Hydraulic Belt Tensioner - E36, E46, E39 6-cyl
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:1603
Part#: 11281717188
Ships in 1-2 days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

For Alternator / Water Pump Belt

Hydraulic Belt Tensioner for E36, E46, E39 6-cyl models. This is the oil-filled tensioner that keeps the main drive belt in the proper tension. Over time the piston seals inside allow fluid to leak out. The tensioner becomes frozen or inoperable. Replacement is the best corrective action to take. This can be done during any belt or pulley service or anytime the fan is off the engine.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


NOTE: These BMW's may have been equipped with either a mechanical or hydraulic tensioner. Only for cars with Hydraulic Belt Tensioners. Please check before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i
1999-2000 E46 323i, 323Ci, 328i, 328Ci
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
2001-2006 E46 M3 coupe & convertible
2000-2006 X5 3.0 liter (E53 chassis)
2006 525i, 530i(M54 engine)
1997-2002 Z3 & MZ3 2.8, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

Show More Show Less
Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
In Stock at Vendor
$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
For servicing overhead valve engine with cylinder head removed.

Packaged by Turner - Corporate Logo
T#:303995
Part#: TEN3680FRC
Ships in 8 Business Days
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.
Show More Show Less

Schrick - Corporate Logo
T#:3501
Part#: 05601880-00
Ships on Nov 9, 2026
$ 490.00 USD
Free Shipping
$ 490.00 USD
Free Shipping
SEE T#338236
OEM INA Tensioner Pulley Assembly - E34 E32 E38 E31 M60
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:371789
Part#: 11281736724
In Stock
$ 303.99

This product was last offered at the strikethrough price on
05-02-2026

$ 273.99 USD
Limited Qty Sale
Free Shipping
$ 303.99

This product was last offered at the strikethrough price on
05-02-2026

$ 273.99 USD
Limited Qty Sale
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belt. This tensioner keeps the belt for the  Air Conditioning taught to provide maximum performance of each system. Replacement for BMW part # 11281736724. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:340508
Part#: TMS2820
Ships in 2 Business Days
$ 268.99

This product was last offered at the strikethrough price on
04-06-2026

Starting at $ 245.73 USD
Free Shipping
Starting at $ 245.73 USD
Free Shipping
This kit includes all the parts you will need to repair a leaking Valley Pan Gasket on your BMW V8. This fits E31 840i 840ci E32 740i 740il E34 530i 540i E38 740i 740il E39 540i E53 X5 4.4i (M62) X5 4.6is.

This kit includes the following parts:
4 x 11611433328 - Intake Manifold Gasket
1 x 11141742042 - Valley Pan with Gasket
2 x 11531710048 - O-Ring for Water Pump
2 x 11531710055 - O-Ring for Water Pump
1 x 11141736106 - Valley Pan Plastic Cover

This item fits the following BMWs:
1993-1995 E34 BMW 530i 540i
1997-2003 E39 BMW 540i
1992-1994 E32 BMW 740i 740ili
1995-2001 E38 BMW 740i 740il
1990-1998 E31 BMW 840i 840ci
Show More Show Less


Packaged by Turner - Corporate Logo
T#:559281
Part#: M20TBELTKT
In Stock
Sale - Save 11% $ 83.99

This product was last offered at the strikethrough price on
04-03-2026

$ 75.11 USD
Free Shipping
Sale - Save 11%
$ 83.99

This product was last offered at the strikethrough price on
04-03-2026

$ 75.11 USD
Free Shipping
Valeo New Alternator - 80 Amp - E34, E36
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377737
Part#: 12311744564
In Stock at Vendor
$ 549.99

This product was last offered at the strikethrough price on
05-07-2026

$ 533.99 USD
Free Shipping
$ 533.99 USD
Free Shipping
Brand new unit with no core charge
Packaged by Turner - Corporate Logo
T#:556718
Part#: M50S50TISKT
Ships in 2 Business Days
Sale - Save 11% $ 494.46

This product was last offered at the strikethrough price on
01-23-2026

$ 438.50 USD
Free Shipping
Sale - Save 11%
$ 494.46

This product was last offered at the strikethrough price on
01-23-2026

$ 438.50 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:337950
Part#: 11120034107
In Stock
Sale - Save 3% $ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD
Free Shipping
Sale - Save 3%
$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD
Free Shipping
Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M50 (M50TU) engine with VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070531

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1995 E36 BMW M3
1993-1995 E34 BMW 525i
Show More Show Less

Packaged by Turner - Corporate Logo
T#:589759
Part#: PBTABE34M20KT
Ships in 6 Business Days
$ 142.09 USD
Free Shipping
$ 142.09 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:2810081
Part#: 11121707032-3KT
Ships in 7 Business Days
Sale - Save 1% $ 1,614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,600.35 USD
Free Shipping
Sale - Save 1%
$ 1,614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,600.35 USD
Free Shipping
Includes all of the necessary components to service and replace the head on your M20 powered BMW

Packaged by Turner - Corporate Logo
T#:338003
Part#: 12141720852
Ships on Oct 16, 2026
Starting at $ 108.99 USD
Free Shipping
Starting at $ 108.99 USD
Free Shipping
This crank shaft position sensor (CPS) provides the engine computer with engine speed data via the harmonic balancer. It mounts off the engine block and reads the front crank pulley to tell the engine what position the engine internals are in. This sensor is crucial for starting the car as the ECU will not allow the engine to start without this signal. It fits all M20 engines in the E30 and E34. A lot of times the sensor is covered in oil, broken from a spinning belt, or the clearance to the pulley is not correct (should be .040"). Interchangeable with #12141720856.

Brand Options:
Original BMW - more expensive but higher quality and more consistent reliability. The sensor itself has a metal housing that is more durable and will not be affected by heat as much.
Aftermarket/Overseas manufacturer - cheaper than OE BMW but less quality and potentially less consistent. Plastic housing is more susceptible to damage from heat.

This item fits the following BMWs:
1987-1991 E30 BMW 325e 325es 325i 325is 325ix 325ic
1989-1990 E34 BMW 525i
Show More Show Less
Schrick - Corporate Logo
T#:338233
Part#: 05601040-00
Ships on Nov 6, 2026
Starting at $ 1,489.99 USD
Free Shipping
Starting at $ 1,489.99 USD
Free Shipping
Schrick's most aggressive cam for the M20 engine. The 304-degree will make big power at the top but there will be a loss of low-end torque so this cam is only recommended for cars that see most of their time above 4000 rpm. Schrick High Performance valve springs are strongly recommended. This cam has a 12.2mm lift and will not clear stock M20 pistons.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less

Schrick - Corporate Logo
T#:338236
Part#: 05601880-00
Ships on Nov 6, 2026
Starting at $ 490.00 USD
Free Shipping
Starting at $ 490.00 USD
Free Shipping
E30 325i, E34 525 (M20) 288 degree Schrick Camshaft. This is Step 3 in Schrick's line of performance cams and the best balance of power and driveability. Expect a big boost of power at the top end but a slight loss in low-end torque. Schrick recommends replacing the valve springs with their own for this application.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less

Schrick - Corporate Logo
T#:389586
Part#: 338236TCKRM3LJXJ
Ships on Nov 9, 2026
$ 490.00 USD
Free Shipping
$ 490.00 USD
Free Shipping
Schrick - Corporate Logo
T#:21521
Part#: TMS21521
Ships on Nov 9, 2026
$ 3,470.66 USD
Free Shipping
$ 3,470.66 USD
Free Shipping
These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:206
Part#: 05601840-00
Special Order: No Guaranteed ETA
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiast nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. This is Step 2 in Schrick's line of performance cams. The 284 degree cam will be great for owners who want to retain their driveability on the street and only need a modest boost in top-end RPM. Schrick recommends replacing the valve springs with high-performance springs for this application.
Show More Show Less


Schrick - Corporate Logo
T#:4791
Part#: 005602022-062
Ships on Nov 9, 2026
$ 917.99 USD
Free Shipping
$ 917.99 USD
Free Shipping
This Schrick valve spring set includes both the inner and outer valve springs for BMW's with the M20 6 cylinder engine. Designed for use with 272-284-288 degree camshafts. It is important to use Schrick Valve springs when installing camshafts with higher lift.

This item fits the following BMWs:
1987-1991 E30 BMW 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i
Show More Show Less
Schrick - Corporate Logo
T#:338235
Part#: 05601840-00
Ships on Nov 6, 2026
Starting at $ 479.00 USD
Free Shipping
Starting at $ 479.00 USD
Free Shipping
E30 325i, E34 525 (M20) 284 degree Schrick Camshaft. This is Step 2 in Schrick's line of performance cams. The 284 degree cam will be great for owners who want to retain their driveability on the street and only need a modest boost in top-end RPM. Schrick recommends replacing the valve springs with high-performance springs for this application.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401679
Part#: M20_11KT1
Ships in 2 Business Days
$ 291.99

This product was last offered at the strikethrough price on
06-29-2026

$ 267.99 USD
Free Shipping
$ 267.99 USD
Free Shipping

 The timing belt on the M20 engine should be replaced every 50,000 miles. The Gates Racing's timing belt this kit includes  is constructed of HNBR elastomeric composites. That being said, they are 300% stronger than the OE belt & deliver up to three times the heat resistance. Also included in this kit are the following:

  • Gates Racing Timing Belt
  • Tensioner
  • Tensioner Spring and Bolt
  • Water Pump & Gasket
  • Thermostat & Gasket
  • Camshaft Seal
  • 1 Liter of Coolant
  • Radiator Drain Plug

This kit includes sufficient coolant for a water pump replacement. If you intend to perform additional cooling system maintenance, pick yourself up an additional bottle of coolant.

 

For vehicles with production date from 09/1987.For vehicles with production date from 09/1987.

Show More Show Less

BMW M30 6 Cyl. 284-Degree - Motronik- Camshaft
For Vehicles Equipped With Bosch Monotronik Only
Schrick - Corporate Logo
T#:349964
Part#: 002201840-04
Special Order: No Guaranteed ETA
$ 1,191.99 USD
Free Shipping
$ 1,191.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - Duration Exhaust - 280 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 7 Cam Lobe Lift Exhaust - 8, 6 Valve Lift w/o Valve Clearance Intake - 10, 9 Valve Lift w/o Valve Clearance Exhaust - 10, 8 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25
Show More Show Less

Schrick - Corporate Logo
T#:338214
Part#: 002201840-04
Back Ordered
Starting at $ 1,659.87 USD
Free Shipping
Starting at $ 1,659.87 USD
Free Shipping
German-made Original Schrick performance camshaft for M30 engines in 1984-up E24 635CSi, E28 533i/535i / 535is, and the E34 535i. This camshaft has a bit more duration and higher lift than the stock cam for improved top-end performance.



Cam Specs
Cam Lift
(Valve Lift)
I/E (mm)
Duration CRA
Intake/Exhaust
Peak Timing
Valve Timing
CRA
IO-IC-EO-EC
Valve lift
at TDC
I / E (mm)
Valve
clearance
I / E (mm)
Recommended
valve springs
8.7/8.6
(10.9/10.8)
284/280/11032-72 70-301.9 / 1.70.25 / 0.251982-1984: 000202090
1985-1993: 005602022 (inner)
005602062 (outer)


BMW Schrick Technical Specs Schrick Technical Information / Specs


Note: this camshaft is designed to work on the "bolt-on" style distributor rotor. Some cars produced before 1985 with the "slide-on" style rotor require adaptor #11311288027.

Applications:
1984-1989 E24 633CSi, 635CSi
1984-1988 E28 533i 535i, 535is
1989-1993 E34 535i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:589745
Part#: PBTABE3XM60KT
Ships in 9 Business Days
Sale - Save 9% $ 702.99

This product was last offered at the strikethrough price on
05-03-2026

$ 640.44 USD
Free Shipping
Sale - Save 9%
$ 702.99

This product was last offered at the strikethrough price on
05-03-2026

$ 640.44 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556707
Part#: E34M60TISKT
Ships in 1-2 days
Sale - Save 10% $ 672.99

This product was last offered at the strikethrough price on
01-23-2026

$ 602.41 USD
Free Shipping
Sale - Save 10%
$ 672.99

This product was last offered at the strikethrough price on
01-23-2026

$ 602.41 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:556694
Part#: E34M30TISKT2
Ships in 7 Business Days
Sale - Save 6% $ 408.99

This product was last offered at the strikethrough price on
06-03-2026

$ 383.33 USD
Free Shipping
Sale - Save 6%
$ 408.99

This product was last offered at the strikethrough price on
06-03-2026

$ 383.33 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Schrick - Corporate Logo
T#:136
Part#: TMS136
Ships on Nov 9, 2026
$ 3,999.99 USD
Free Shipping
$ 3,999.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S38 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 280 Duration Intake @ 1mm - Duration Exhaust - 280 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 11 Cam Lobe Lift Exhaust - 11 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 35 Valve Clearance Exhaust - 0,35
Show More Show Less

Schrick - Corporate Logo
T#:343814
Part#: 05601040-00KT
Ships on Nov 9, 2026
$ 1,489.99 USD
Free Shipping
$ 1,489.99 USD
Free Shipping
Schrick - Corporate Logo
T#:348282
Part#: 05601720-00
Special Order: No Guaranteed ETA
$ 1,129.99 USD
Free Shipping
$ 1,129.99 USD
Free Shipping
For over 40 years, Schrick has been a pioneer in engine performance, crafting top-quality camshafts trusted by BMW enthusiasts worldwide. Their commitment to excellence is evident in the development of camshafts suitable for both street and track use, constructed from premium materials for unparalleled strength and precision. With a focus on innovation, Schrick has established itself as a leader in engine testing and manufacturing technology. Upgrade your BMW with the 272-degree Schrick Camshaft, offering a significant performance boost over stock cams. Experience enhanced horsepower at higher rpm ranges, where the stock engine may lack vigor. This "street" camshaft maintains low-end torque, ensuring a balanced performance across all speed ranges. For optimal results, Schrick recommends pairing this camshaft with upgraded valve springs.
  • High-quality camshafts for BMW enthusiasts
  • Boosts horsepower at higher rpm ranges
  • Maintains low-end torque for balanced performance
  • Crafted from premium materials for strength and precision
  • Recommended for use with upgraded valve springs
Show More Show Less
Schrick - Corporate Logo
T#:394432
Part#: 005601040-00
Special Order: No Guaranteed ETA
$ 1,189.99 USD
Free Shipping
$ 1,189.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 304 Duration Intake @ 1mm - Duration Exhaust - 304 Duration Exhaust @ 1mm - Intake Peak Timing - 105 Exhaust Peak Timing - 105 Cam Lobe Lift Intake - 7, 7 Cam Lobe Lift Exhaust - 7, 7 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25
Show More Show Less


Packaged by Turner - Corporate Logo
T#:401690
Part#: OILTEMPGAUGEKT1
Ships on Dec 1, 2026
Sale - Save 2% $ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
Sale - Save 2%
$ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401689
Part#: OILTEMPGAUGEBRKK
Ships on Dec 1, 2026
Sale - Save 2% $ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
Sale - Save 2%
$ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:589854
Part#: PBTABM30KT
Back Ordered
$ 203.99 USD
Free Shipping
$ 203.99 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556703
Part#: E34M20TISKT2
Back Ordered
Sale - Save 7% $ 370.99

This product was last offered at the strikethrough price on
06-03-2026

$ 346.52 USD
Free Shipping
Sale - Save 7%
$ 370.99

This product was last offered at the strikethrough price on
06-03-2026

$ 346.52 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less