BMW Cooling System Parts & Accessories for BMW 5 Series E34 (1987-1995)

BMW vehicles are known for their robust performance, but the water pump is a notorious weak spot, often needing replacement every 60,000 miles.

During this service, it's wise to also swap out the thermostat to maintain the efficiency of your vehicle's cooling system. Turner Motorsport simplifies this process with our expertly curated Water Pump & Thermostat Replacement Kit.

This premium kit centers around the renowned EMP Stewart high-performance water pump--a favorite among BMW enthusiasts for its exceptional design. Featuring a stainless steel impeller, this pump enhances coolant flow by 20%. Complementing this is a low-temperature 68°C (154.4°F) Mishimoto thermostat, an upgraded aluminum thermostat housing, and Redline Water Wetter coolant additive. Together, these components make for the ultimate cooling system upgrade for your E36, E39, or Z3!

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

To make sure your temperature readings are as accurate as possible, replace your temperature sensor with a high quality OEM Bosch temperature sensor.

OEM replacement for BMW part # 13621709967, 13621709966, and 13621284397. Bosch coolant temperature sensor mounted in the cylinder head on models with the M42, M50 and S50 engines.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1988-1991 E30 BMW 318i 318is 318ic M3
1992-1995 E36 BMW 318i 318is 318ti 318ic 325i 325is 325ic M3
3/1987-1988 E28 BMW 528e
1985-1988 E28 BMW535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1985-1989 E24 BMW 635csi M6
1984-1987 E23 BMW 735i
1988-1992 E32 BMW 735i 735il

Upgrade your BMW E30 or E34 M20 2.5L engine with this Genuine BMW Coolant Hose. Crafted to exacting standards, this hose ensures optimal performance and durability for your vehicle. Say goodbye to leaks and overheating issues with this high-quality replacement part. Keep your BMW running smoothly and efficiently with this essential component.

• Genuine BMW part for perfect fit and function
• Crafted to exacting standards for durability
• Prevents leaks and overheating
• Ensures optimal engine performance
• Compatible with BMW E30 and E34 M20 2.5L engines

This is a quality aftermarket replacement aluminum thermostat housing for cars with the M20 6 cylinder engine - 325e, 325i, 528e, 525i. This is the side of the housing that mounts to the cylinder head and has openings for the various coolant / engine temperature sensors. There are 4 ports for sensors so check your existing housing for the sensor layout.

If you're looking for a Genuine BMW factory replacement part, Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
 

Upgrade your E30 or E36 cooling system effortlessly with the Condor fan relay harness designed specifically for SPAL fans. This harness seamlessly integrates with your existing OEM radiator temperature switch (we recommend the 80/88c E36 sensor), making installation a breeze. Here are the key features of this kit:

Seamless integration with OEM radiator temperature switch Compatibility with SPAL fans for efficient cooling Triggering of the relay when the temperature threshold is met Weatherproof fuse holder for added protection High-temperature wire for reliable performance Durable wire sleeving resistant to abrasion, chemicals, and UV rays Two easy-to-install options for connecting to the BMW radiator temperature switch, labeled for simplicity Experience consistent and effective fan operation with the Condor fan relay harness, ensuring optimal cooling performance for your vehicle.

This is the stock aluminum thermostat housing for cars with the M20 6 cylinder engine - 325e, 325i, 528e, 525i. This is the side of the housing that mounts to the cylinder head and has openings for the various coolant / engine temperature sensors. There are 4 ports for sensors so check your existing housing for the sensor layout.

Mission Trading Company is a worldwide leader in the manufacturing of European, Japanese and domestic auto parts. With factories around the world producing parts to the most stringent of standards MTC is there with the parts for your next project.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
5/1982-1988 E28 BMW 528e
1989-1990 E34 BMW 525i

BMW & MINI Universal Oil Cooler - 10 Row is a versatile cooling solution designed to enhance the performance and reliability of BMW and MINI vehicles. This high-quality oil cooler provides efficient cooling for the engine oil, ensuring optimal operating temperatures and extending the life of vital engine components.

Crafted with precision engineering and durable materials, the BMW & MINI Universal Oil Cooler - 10 Row is compatible with a wide range of BMW and MINI models, offering versatility and ease of installation. It effectively dissipates heat from the engine oil, reducing the risk of overheating and engine damage.

• Enhances performance and reliability of BMW and MINI vehicles
• Efficient cooling for engine oil, ensuring optimal operating temperatures
• Extends the life of vital engine components
• Compatible with a wide range of BMW and MINI models
• Versatile and easy to install
• Crafted with precision engineering and durable materials

Investing in the BMW & MINI Universal Oil Cooler - 10 Row is a smart choice for BMW and MINI owners looking to improve their vehicle's performance and longevity.