Revamp your BMW E36 with the exclusive Turner In-House ABS Rear Diffuser and Side Spats for M3 Rear Bumper. Engineered by Turner Motorsport's dissatisfied engineers, this upgrade guarantees a unique and bold statement for your vehicle.

Key Features & Specifications:

• Diffuser designed around E36 body lines
• In-house design using 3D laser scanning and CAD technology
• Mounts to factory locations with OE hardware
• Lightweight, vacuum-formed ABS polymer with UV-stabilized black sheet
• Mimics lower bumper & OE diffuser lines for accentuating OEM features

Turner Motorsport High Kick Trunk Spoiler - Matte Black - E36

Enhance your E36 Coupe's aesthetics with the Turner High Kick Trunk Spoiler, included for free. Developed in-house, this ABS spoiler transforms your vehicle's look, ensuring a standout appearance without breaking the bank.

Installation Steps:

1. Clean the trunk surface area
2. Remove backing from the double-sided tape
3. Line it up, and press firmly down
4. Recommended for installation in a warm environment for better adherence

Additional Features & Specifications:

• In-house design using 3D laser scanning and CAD technology
• Mimics the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge
• Utilizes 3M double-sided tape for a strong bond
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Upgrade your E36's exterior styling with this exclusive Enthusiast Bundle kit!

Turner Motorsport Smooth ABS Matte Black Diffuser - E36 M3

Features & Specifications:

Diffuser with curvature designed around the E36 body lines Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment Mounts to existing bumper insert mounting locations with OE hardware Made from lightweight, vacuum-formed ABS polymer, with UV-stabilized black sheet Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware LTW-Inspired ABS Front Lip - Matte Black

Features & Specifications:

LTW inspired design Vacuum formed ABS plastic with UV resistant construction 2-Piece bonded design for increased rigidity Designed by TMS engineers using 3D laser scanning & CAD for precision fitment Uses factory self-tapping screws for installation (Need new hardware? See T#599749) Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

E36 Coupe LTW Spoiler:

Experience a modern interpretation of LTW styling with our latest creation. Inspired by the classic E36 lightweight, and crafted with precision by our expert engineering team at Turner, we proudly introduce our carbon LTW spoiler, setting a new standard in the industry. Carefully crafted with a multi-piece carbon design, our spoiler is not just an accessory; it's a work of art featuring a flawless glass-like finish and perfectly matched carbon weave.

As fellow enthusiasts, we understand the importance of preserving the integrity of E36s and their components. With iconic colors like Techno Violet, Boston Green, and Estoril Blue in mind, we refuse to compromise the original trunk and paint with traditional drilling methods. Instead, our carbon LTW spoiler features an innovative fastening system that requires no modifications and preserves your car's pristine showroom finish. With precision-engineered billet clamps and high-quality 3M double-sided tape, installation is a breeze, requiring only basic hand tools. No drilling is necessary.

Research and development:

We feel it is crucial to share our journey into the design and engineering that went into developing this remarkable carbon spoiler. The development of this LTW spoiler was not a quick process; it spanned over three years. Throughout this time, we dedicated ourselves to refining, testing, and making adjustments to craft a spoiler that we're thrilled to introduce to the community.

From perfecting the form and fitment to ensuring the spoilers's stability, every aspect of this project presented significant challenges. This carbon spoiler is comprised of 5 components, the base spoiler, 70mm risers, upper spoiler, gurney flap, and most importantly the mounting brackets.

Anyone familiar with carbon fiber knows the difficulty of working with these nearly 50-inch wide pieces to achieve straightness without flex while maintaining a consistent carbon weave pattern. During the initial stages of carbon testing, the manufacturing process proved to be nothing short of impossible. Issues such as carbon fiber twisting during curing, waviness in the exterior appearance, and mismatched carbon weave posed significant hurdles.

Furthermore, ensuring precise fitment was paramount. Not only did the spoiler components need to seamlessly integrate with the trunk gaps, but they also had to clear adjacent body portions without error. We underwent rigorous testing, cycling through five sets of carbon spoiler prototypes before achieving a result that met our exact standards.

Numerous adjustments were made throughout the project, including modifications to the carbon composition, bracketry, and the incorporation of gaskets between carbon layers. Our passion and dedication were poured into every aspect of this product.

Throughout the project timeline, we conducted extensive long-term testing on various vehicles, subjecting the spoiler to speeds beyond what can be publicly disclosed. When we say these spoilers are secure, we mean it. Utilizing both 3M double-sided tape and four billet brackets with a total of eight fasteners, this spoiler can be confidently installed. The billet mounting brackets are designed to fasten over the top of the factory seam sealer on the underside of the trunk for maximum stability. Near the end of testing, we decided to add an adhesive-backed gasket to the underside of the base, providing yet another layer of paint protection.

Styling:

The greatest part we have enjoyed over this project is the versatile style of the spoiler as designed. If you have read this far into our development process we can strongly say that you are a true car enthusiast. As car enthusiasts we can never leave the car alone, changing setups and most importantly styling. With the multi-piece design, the option to change up your look is just moments away with a little help from some hand tools.

Initially, we were fully committed to running the complete setup: full height, 70mm risers, and gurney flap – all inspired by the LTW look with a modern carbon twist. However, as we spent more time with the spoiler, our perspective shifted. We decided to remove the 70mm risers and suddenly rediscovered our love for the E36's original aesthetic. Without the risers, the spoiler took on a new, understated elegance, blending seamlessly with the car's overall design.

Time passed, and we began to explore other options. Removing the gurney flap toned down the race car vibe, revealing yet another layer of the spoiler's versatility. Each subtle alteration brought about a significant change in style, proving that even the smallest adjustments could make a world of difference.

Our journey with the spoiler was one of constant evolution; from full-on LTW racing aesthetics to more understated styling and back again. This flexibility was the true beauty of our creation, keeping us engaged and dedicated throughout the rigorous development process.

E36 M3 Street Flow Rear Diffuser

Add-on diffuser to deliver a true motorsport look to your M3. Fastened seamlessly to the bottom of the rear bumper giving a platform to show off your exhaust and complete the rear end of the E36.

The E36 M3 is an amazing looking car right out of the box but a common BMW issue is the height of the front vs rear bumpers. As far back as the E30, the front bumper is much lower than the rear bumper and the E36 M3 faces the same issue. With this problem the front bumper is always super low to the ground and the rear bumper looks in-complete. The ECS add-on diffuser is a unique option for balancing out the rear bumper with the height of the front bumper for a full and complete look.

Give your M3 that wild style that stands out from the crowd, and obtain a nice balanced look. This is just the start of a new line of Street Flow Diffusers diffusers that are a must have extension of your awesome ride. The diffusers come powder coated in a sleek satin-black finish, are a blast to install and fit seamlessly against the rear bumper for a professional looking install every time. The Street Flow diffuser attaches below your factory rear diffuser and exhaust of your choosing to fill out the rear end for a nice full and aggressive styling profile.

Lets take a trip together down a new and unique path. Over the years ECS has designed factory replacement ABS and Carbon Fiber diffusers for all different models of BMW's. For the factory replacements ECS focus was to take the oem characteristics and add a twist and really bring out a more aggressive look with a direct replacement diffuser. For their new line of diffusers, us as car enthusiasts wanted to design a set of diffusers that really pushed the envelope and stepped outside of our comfort zone. Our new line of add-on diffusers is a result of our engineering team and fellow enthusiasts spending time study the M3 chassis, modeling different designs, testing prototypes and making changes to get a final product that we are extremely excited to offer. The E36 M3 Street Flow Diffuser is the first in our line of new diffusers. Stay tuned for the E92 M3 diffusers next!

Features:

Adds an aggressive aesthetic in addition to the subtle factory rear diffuser Lightweight and durable 10ga aluminum in satin black powder coat to blend with the factory trim color Installation is secure and simple with ample adjustability built in for perfect fitment Design:

10 ga 5052 aluminum construction Black satin powder coat for long term corrosion resistance 5 piece design to simplify installation Slotted mounting locations to allow for mounting adjustment Laser cut ECS logo pre powder coat for a smooth finish Hidden hardware for better aesthetic

Upgrade your E36's exterior styling with this exclusive Enthusiast Bundle kit!

Turner Motorsport Textured ABS Matte Black Diffuser - E36 M3

Features & Specifications:

Diffuser with curvature designed around the E36 body lines Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment Mounts to existing bumper insert mounting locations with OE hardware Made from lightweight, vacuum-formed ABS polymer, with UV-stabilized black sheet Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware LTW-Inspired ABS Front Lip - Matte Black

Features & Specifications:

LTW inspired design Vacuum formed ABS plastic with UV resistant construction 2-Piece bonded design for increased rigidity Designed by TMS engineers using 3D laser scanning & CAD for precision fitment Uses factory self-tapping screws for installation (Need new hardware? See T#599749) Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Flush License Plate Bolt - 12mm

Upgrade your vehicle's aesthetics with the Flush License Plate Bolt - 12mm, designed to seamlessly blend into your license plate for a sleek appearance. Crafted from durable materials, this bolt offers both style and functionality. Its low-profile design ensures a clean look while providing secure attachment. Enhance your vehicle's exterior with this easy-to-install accessory.

• Sleek and seamless appearance
• Durable construction for long-lasting use
• Low-profile design for a clean look
• Easy installation process

Enhance both the aesthetics and aerodynamics of your vehicle with the E36 LTW Style Front Lip in Textured Matte Black by Turner Motorsport. This front lip not only transforms your car's appearance but also contributes to downforce, improving overall handling at higher speeds. Crafted from durable UV-stabilized ABS in a two-piece bonded design, this front lip is a cost-effective and lightweight alternative to traditional carbon fiber options. Perfect for daily drivers and track enthusiasts alike, it provides a clean matte finish reminiscent of the original E36 trim.

Concerned about potential damage? Fear not! This front lip is positioned to endure the challenges of road debris, uneven surfaces, and speed bumps. Additionally, it's designed for compatibility with M3 front bumpers and aftermarket replicas, ensuring a precise fit. Worried about the matte finish? No problem! The lip can be prepped and painted to suit your preferences.

Key Features & Specifications:

• LTW-inspired design for a sleek appearance
• Vacuum-formed ABS plastic with UV-resistant construction
• 2-Piece bonded design enhances rigidity
• Precision fitment designed by TMS engineers using 3D laser scanning & CAD
• Uses factory self-tapping screws for installation (Need new hardware? See ES4159683)
• Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Turner Motorsport High Kick Trunk Spoiler. This ABS High Kick Trunk Spoiler is designed and engineered in-house by Turner Motorsport, using cutting-edge 3D laser scanning and CAD technology for precision fitment. Crafted from impact and UV-resistant ABS plastic, this spoiler not only enhances the sporty style of your E36 coupe but also fits your budget without compromising on quality.

Installation:

1. Clean the surface area of the trunk.
2. Remove the backing from the attached high-strength double-sided tape.
3. Line it up and press firmly down.
4. For optimal adhesion, it's recommended to perform the installation in a warm environment.

Additional Features & Specifications:

• Mimics the design of the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge of the spoiler
• Utilizes 3M double-sided tape for a strong bond to the body
• Lightweight, vacuum-formed gloss black ABS polymer enhanced with UV stabilizer

Having trouble prying off your wiper arm? Prevent damaging your vehicles paint or the arm itself with this puller tool.

With ease in mind, this has many benefits over using a traditional pry bar. The handle is a sturdy plastic knob that allows you to get a solid grip when applying pressure. Low profile design allows you to get into tight areas with potentially damaging your paint or needing to pry against a weak surface. The rounded point allows you remove the wiper arm puller with little to no marks left behind on the wiper's shaft, linkage, or any other surfaces.
 

Features:

•  Will not damage wiper arm or hood cowling during removal
•  Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft
• Easy adjustment with molded handle