BMW Brakes & Brake Parts for BMW E36 (1992-1998) M3

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

• RST1 -  Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
• RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
• RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
• RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
• RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Enhance Your BMW's Braking Performance with ECS Tuning's Innovative Package

Upgrade the braking capabilities of your BMW E36 M3 or Z3M with ECS Tuning's advanced braking package. This solution prioritizes increased brake torque and thermal capacity, utilizing ECS 2-piece E46 M3 CSL rotors to deliver outstanding performance behind 18" wheels and compatible 17" big brake-friendly wheels.

Key Benefits:

• Custom-designed caliper bracket for fitting ECS 2-piece E46 M3 CSL rotors
• Lightweight aluminum hats for reduced weight and enhanced durability
• Gray cast iron rings for wear resistance and efficient heat dissipation
• 2-Piece semi-floating construction prevents rotor warping
• Heat-treated for increased strength and performance
• Directionally veined for accelerated cooling
• Drilled and slotted design for improved ventilation and cleaner brake pads
• Overall weight savings for improved braking and suspension performance
• High manufacturing quality for corrosion resistance and long-term durability

Installation is hassle-free, utilizing existing calipers, pads, lines, and hardware. Upgrade your pads simultaneously with a wide selection of E36 M3 or E46 M3 brake pads for enhanced performance.

The Brake Cooling Backing Plates from HARD Motorsport features a design that creates a pocket that forces cool air directly into the rotor from the hat so that built up up doesn't have time to lead to premature brake failure and wear. For any sporty or track driven vehicle, this is an absolute must have! It is made from lightweight solid aluminum and is power-coated for extra protection and appearance. They are installed into OEM mounting locations using stock hardware.

For use with the HARD Motorsport Complete Brake Cooling Duct Kit

Fits the following vehicles:

E36 BMW M3 and all submodels with an OEM M3 rotor conversion

The caliper sliding bolts are one of the most overlooked wear items in your braking system. Subjected to constant motion and often without adequate lubrication the guide bolts see a lot of wear and tear. Factory BMW caliper guide bolts are very expensive from the dealer - these 304 stainless steel bolts are less than half the price and provide outstanding resistance to corrosion and wear. They are manufacturered with tighter tolerances than the factory bolts too.

Price is per bolt unless noted (2 required per caliper).

Enter your vehicle info for specific fitment information.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Struggling with corroded brake rotor set screws on your BMW? ECS Tuning has the perfect solution. Introducing our stainless steel rotor set screws that won't seize up, preventing the need for drilling out failed screws. The stainless steel composition ensures easy removal, offering years of trouble-free use compared to the OEM part.

• Stainless steel construction prevents corrosion
• Easy removal for years of trouble-free use
• Eliminates the risk of seized set screws
• Custom-designed for BMW vehicles
• Avoids the need for drilling out failed screws
• Check fitment information for your specific BMW model

A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:

• Increased stopping power even when the pads are cold
• Longer pad life
• Low dust compared with other performance pads
• Quiet operation

In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects. 

This pad set includes pads for both FRONT brakes. 

This item fits the following BMWs: 
Z3, E36, E39, E32