Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-16-2026
All sets of 12 now 10% off regular price!
Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.
Features:
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
When high torque loads and aggressive corner exits push your chassis to the limit, stock differential mounts quickly become the weak link. The ECS Tuning Rear Differential Front Mount Upgrade Kit is track-engineered to lock down your rear diff, control axle wrap, and ensure immediate power delivery to the pavement.
Built to withstand severe track abuse, this kit eliminates hardware failure by replacing the undersized factory M12 bolt with an ultra-high-tensile Grade 12.9 M14x1.5 bolt. Surrounding the upgraded hardware is a track-spec 95A durometer red polyurethane bushing and a rugged 6061-T6 aluminum sleeve finished in Type II black anodizing. Engineered for maximum drivetrain stiffness, this upgrade ensures your differential stays precisely aligned under the harshest motorsport conditions.
Note: Upgrading to M14x1.5 hardware requires drilling and tapping the original M12x1.5 differential mounting hole. See T#58563042 for a complete kit that includes the proper-sized drill and tap.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.
Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.
Key Features:
Specifications:
Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.
For replacement parts, please call us and ask for:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
Fitment in following BMWs:
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels, ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
*Does not include flywheel.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Ridged Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Ridged hub/ disc
Steel-backed kevlar friction material
*Does not include flywheel.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Ridged Disc version.
FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Ridged hub
Steel-backed organic friction material
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX400 (Stage 4)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed 6-Puck Ceramic Sprung Disc friction material
*This clutch kit does not include a flywheel. Requires use of single mass flywheel
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.
The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.
*Does not include flywheel.
When high torque loads and aggressive corner exits push your chassis to the limit, stock differential mounts quickly become the weak link. The ECS Tuning Rear Differential Front Mount Upgrade Kit is track-engineered to lock down your rear diff, control axle wrap, and ensure immediate power delivery to the pavement.
Built to withstand severe track abuse, this kit eliminates hardware failure by replacing the undersized factory M12 bolt with an ultra-high-tensile Grade 12.9 M14x1.5 bolt. Surrounding the upgraded hardware is a track-spec 95A durometer red polyurethane bushing and a rugged 6061-T6 aluminum sleeve finished in Type II black anodizing. Engineered for maximum drivetrain stiffness, this upgrade ensures your differential stays precisely aligned under the harshest motorsport conditions.
Upgrade the whole driving experience of your car with a single mass clutch and flywheel conversation paired with new upgraded engine and transmission mounts. These street durometer mounts are 70 and 75 durometer for an improved but not too harsh driving experience. This clutch and flywheel upgrade features a slightly heavier pedal feel with smooth engagement, paired with your upgraded drivetrain mounts you are sure to have confidence in how sturdy your car drives!
Our performance clutch and flywheel kit utilizes an upgraded ECS E34 M5 clutch kit with our in-house engineered flywheel to fit all M5x and S5x motors with a 5-speed transmission. By eliminating the dual-mass flywheel and replacing it with a single-mass we are able to eliminate the slack and extra weight of the flywheel for a quicker throttle response and acceleration. Our upgraded clutch kit utilizes all the best features of the original M5 clutch with an upgraded pressure plate and clutch disc, with the new clutch you have a better, more engaged clutch pedal feel, engagement, and longevity.
Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch and flywheel kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.
Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.
On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.
The E34 M5 clutch and flywheel kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.
Kit Contents:
Single Mass Flywheel - E34 M5 Clutch Geometry Performance Clutch Disc and Pressure plate Throw-out Bearing Pilot Bearing Clutch Alignment Tool Flywheel Bolts - Qty 8 Pressure Plate Botls - Qty 6 Clutch features:
Torque Capacity (Crankshaft): 375 Ft / Lbs Clutch Disc: 240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement Pressure Plate Increased clamp force over OEM, rated at 1,729lbs of pressure Flywheel features:
Eliminates factory dual mass Improved throttle response Improved acceleration Hardened 4140 Chromoly Steel Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel Weighs in at just 16.5lbs vs Factory Dual Mass - 25.3 lbs SFI certified Polyurethane Transmission Mount Set - Street
70A durometer rating - slightly stiffer than stock for improved shifting quality and driveline performance. Constructed of 304 stainless steel with bonded and constrained polyurethane. The transmission mounts in your car play a critical role in your suspension. With this in mind, the stock mounts have been known to experience failures causing over-revving, mis-shifts, and in extreme cases, even chassis damage. Combat this issue with upgraded polyurethane transmission mounts from ECS Tuning. Designed with the street and track in mind, we've got you covered no matter your driving style. Fears of torn mounts are a thing of the past; a mechanical interlock feature makes these mounts ideal even for high-torque, forced-induction applications. Engine Mounts - 75A Durometer
Keep your engine securely mounted with our solid, non-fluid-filled mounts. Our ECS 75A Durometer engine mounts are custom-made in-house by our leading R&D department. These mounts result from countless hours of research and testing to establish the best possible bushing design to minimize engine vibration and driveline deflection while maximizing strength. ECS Tuning's primary goal was to achieve an economical, durable & compliant ride while maximizing performance. After putting down thousands of real-world test miles on multiple vehicles, we've done just that. With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount* is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible. These mounts are an upgrade for non-M E36/E46 owners seeking a stiffer mount without sacrificing comfort and ride quality.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
E36 188mm Reinforced Billet Aluminum Differential Cover
Engineered from high-quality 6061 billet aluminum, this differential cover is built for resilience and designed for performance. Hard-coat anodized for a sleek finish and superior corrosion resistance, it not only looks great but also brings functional improvements in strength and cooling. Turner Motorsport has added reinforced mounting ears to withstand the toughest driving conditions—preventing the breakages common with OEM covers.
This cover doesn’t just endure—it performs. The cover features strategically placed external fins on the rear face, base, and mounting ears to efficiently dissipate heat, keeping temperatures stable for optimal fluid longevity and differential health. Inside, the design promotes consistent oiling of the ring gear, reducing wear by ensuring critical cooling and lubrication. An integrated baffle keeps pressure stable and minimizes cavitation.
Compatibility is at the core of the design: it’s compatible with OEM gaskets or RTV, and it retains the factory bushing geometry for easy integration with rubber, poly, and even solid mounts. The upgraded -6AN drain and fill plugs allow expansion for an external oil cooler, ideal for high-performance applications. Plus, a 1/8 NPT port allows for real-time monitoring of differential fluid temperatures.
Key Benefits:
Reinforced mounting ears for robust support—no more broken ears during aggressive driving or track days Optimized cooling with fins on rear face, base, and mounting ears Removable air duct to direct airflow across fins for maximum temperature control Improved internal design to maintain consistent lubrication on the ring gear -6AN ports for external cooler compatibility, increasing fluid capacity and extending change intervals 1/8 NPT port for temperature sensor integration to monitor fluid heat Design Highlights:
Precision-milled from 6061 billet aluminum with a T6 hard-coat anodized finish Fits E36 medium case 188mm differentials Compatible with differential coolers (-6AN) and temperature sensors (1/8 NPT) Works with OEM speed sensor, OEM gasket, and oversized sway bars Designed for easy maintenance with a removable air duct and accessible drain/fill plug ECS Tuning E36 Polyurethane Transmission Mount Set – Street
The ECS Polyurethane Transmission Mounts in this kit provide a solid connection between transmission and chassis, enhancing stability and reducing unwanted drivetrain movement. Built for durability, these mounts feature polyurethane with a 70A durometer for a perfect balance of comfort and performance. Compared to OEM rubber mounts, polyurethane provides less deflection, better power transfer, and much longer life under stress.
Polyurethane’s natural resistance to water, oil, and wear ensures these mounts maintain shape and performance even under heavy compression, making them ideal for spirited driving and track use. The mounts include a mechanical interlock for secure, reliable performance—even under high-torque, forced-induction scenarios. For those seeking a more aggressive setup, ECS also offers an 80A durometer Race mount.
Key Features:
Reduces transmission movement, minimizing mis-shifts and over-revs High-quality polyurethane bonded to 304 Stainless Steel Engaging driving experience with enhanced feedback and control Available in Street (70A) and Race (80A) applications for tailored performance Enjoy smoother shifts, firmer power delivery, and a more engaging drive with the ECS Polyurethane Transmission Mounts.
MAGNETIC FENDER COVER:
Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.
Features:
Dimensions:
TELESCOPING LED MIRROR:
You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.
Features:
TELESCOPING MAGNET:
This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.
MAGNETIC PARTS TRAYS:
Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.
Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.
A simple, effective solution to a common problem.
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
Experience unparalleled performance with Red Line CV-2 Grease, expertly crafted to endure extreme temperatures and pressures found in high-performance wheel bearings and CV-joints. This premium grease surpasses both conventional and synthetic options with its exceptional high-temperature stability, superior extreme-pressure protection, and water resistance. Operating effectively in temperatures spanning from -100°F to 500°F, it offers outstanding oxidation and corrosion resistance, minimal evaporation and oil separation, and has minimal impact on rubber seals. Expect a remarkable 200% to 800% increase in bearing life due to the exceptional extreme-pressure performance and synthetic oil fluidity. Its red moly compound outshines black moly disulfide lubricants, ensuring superior lubrication.
Red Line CV-2 Grease finds application not only in automotive settings but also in industrial environments. It excels in high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and other scenarios prone to fretting wear and corrosion. Its consistency and extreme-pressure performance endure high-temperature and high-shear conditions, extending the performance life of lubricated components. Despite darkening after high-temperature use, its efficacy remains unaffected. While compatible with some petroleum-based greases, it's recommended to clean out old grease thoroughly for optimal lubrication performance and to avoid grease incompatibility.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026