BMW Coilovers for Street Use for BMW E36 (1992-1998) M3

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 8k Front & 10k Rear Spring Rate
• Linear front & S-Barrel rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Rear Rubber Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

Adjustable Rebound Damping

This system intended for the experienced E36 M3 driver who wants to determine the individual lowering of his vehicle, and also wants to make setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll of the car and therefore the driving pleasure can be adapted to your requirements.

• Individually adjustable rebound
• Stainless steel technology "inox-line"
• Individually height-adjustable - Front - 30-60mm, Rear - 20-45mm
• TUV approved lowering range
• High-quality component parts for long durability

When using original tires, wheel offset spacers may be required.

Elevate the performance of your E36 M3 with the ECS Tuning Performance Coilover System. This sport-tuned suspension offers adjustable height, damping, and body settings, providing substantial performance benefits. Crafted with high-quality materials and coatings, it replaces worn suspension components while achieving the ideal ride height.

• Spring Rates: Front 6kg/mm, Rear 8kg/mm
• Performance Features:
  • 32 levels of rebound damping adjustment
  • Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip
  • Lowered ride height improves handling performance
  • Adjustable front bodies for personalized ride height and correct spring pre-load
• Product Design:
  • Durable gloss black powder coat on strut and shock bodies
  • Clear zinc-coated threaded portions for corrosion protection
  • Reflex Silver Metallic finish on powder-coated coil springs
  • Red anodized billet aluminum lower spring seats with locking collars
  • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

• Stock vs. Upgrade:
  • Stock rubber bushings designed for comfort, not optimal performance
  • Poly and delrin bushings compromise handling and wear prematurely
• Turner Front Control Arm Spherical Bearings:
  • Greaseable spherical bearing for improved precision and durability
  • 6061-T6 anodized housing with needle grease zerk for easy maintenance
  • Precision CNC machined Delrin arm adapter for a tight fit
• Performance Benefits:
  • Instant, crisp steering and braking response
  • Easy maintenance with long-lasting performance
  • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This item fits the following BMWs:
1995 E36 BMW M3

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING


Height adjustment range:
F: -1.5"-2.5"
R: -1.0"-1.75"

This coilover kit fits the following BMWs:
1995-1999 E36 BMW M3

E36 M3 ECS Performance Adjustable Coilover System

This brand new BMW Coilover line from ECS Tuning was designed with daily drivers in mind! Their focus was to improve on the performance and look of the suspension, without forgoing any comfort. Like many of the top tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while giving you an aggressive look and vastly improved handling, all at a fraction of the price!

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 6kg/mm, Rear is 8kg/mm

PERFORMANCE FEATURES

32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are are clear zinc coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches Integrated bump stops PRODUCT DEVELOPMENT

In-house designed to give your vehicle superior handling performance, long term corrosion protection and fully adjustable ride-height, we set out for a coilover system that is made for THE enthusiasts! Installed and evaluated in-house by our Product Development team in our Wadsworth, Ohio facility, we ensured a high level of precision and quality is delivered throughout thousands of miles of long term product testing. Wheel Spacer "Flush Kit" - Black - E36 M3

Transform your M3's stance with the ultimate Flush Kit! Our flush kit is expertly crafted to ensure OEM factory wheels sit perfectly in line with your vehicle's arches. Forget the trial and error of achieving an aggressive look—our team has precisely calculated the ideal spacer combination for flawless fitment, functional enhancement, and superior aesthetics.

From the factory, BMW wheels often sit inset of the wheel wells, leaving enthusiasts seeking a bolder, more "flush" fender-to-lip alignment. We've set out to solve this issue through extensive testing, discovering a strategic mix of 17.5mm front and 5mm rear spacers provides the perfect solution. Not only does our kit enhance your BMW’s visual appeal, but it also maintains optimal tire clearance, eliminating the risk of rubbing, even on tight turns.

Key Benefits of Turner Motorsport Wheel Spacers:

Hub-Centric Fit: Ensures seamless, vibration-free alignment with factory hub specifications. Precision Engineering: CAD-designed and CNC-machined for unmatched accuracy and consistency. Enhanced Pad Surface: Extra-wide 156mm pad versus standard 150mm for added stability. Aerospace-Grade Aluminum: Delivers high strength without compromising weight. Military-Grade Black Hardcoat: Protects against corrosion and wear, extending durability in all conditions. Quick Release Pockets: Simplifies removal, making brake servicing faster and hassle-free. Unleash a powerful new look for your E36 M3, achieving a refined yet aggressive stance with engineering that you can trust.

OEM Wheel Fitment with the Turner Motorsport E36 M3 Flush Kit:

Style 23 (M-Contour): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Style 24 (M-Round Spoke Type II / LTW): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Style 39 (M-Double Spoke Type II): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Note: Vehicles with modified ride height/suspension geometry may require rolling and/or pulling of factory wheel arches for use with the Turner Motorsport "Flush" Fitment Kit.