BMW Interior Parts for BMW E36 (1992-1998) M3

These E36 door panels incorporate an angled bend to cover the top edge of the door as well as a second bend to latch into the window slot.  The panels are designed to allow customers to retain fully functioning windows without any modification to the window mechanisms.  The panels are powder coated aluminum, have door pull slots designed into them, and weigh only 2 lbs a piece - providing 16 lbs of weight savings over factory door panels.  All mounting holes are pre-drilled, making installation extremely simple, and all required hardware is included.  

Since 2001, Rennline has been producing high-quality accessories for German cars in their Vermont-based factory. Constructed of black powdercoated, aircraft-grade aluminum finished with rubber grips and stainless steel hardware, Rennline pedal covers are a simple modification to your interior that add an instant upgrade in both style and functionality. The aluminum pedals add a sporty look and feel, while the rubber nubs provide the grip necessary for spirited driving. Combined with Rennline's throttle extensions and lift plate, you can customize and fine-tune your driving experience.

Fits the following BMWs:

E30 E31 E34 E36 E39 E46 E53 E60 E63 E64 E8x E9x F06 F10 F12 F22 F23 F3x F8x Z3 Z4 

For vehicles with a MANUAL transmission only.

This dead pedal provides you with the stability you need during spirited driving or on the track. Pairs perfectly with MKAH Diamond Plate Floor Pans.

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

These aluminum pedals give your interior a high-performance look while adding extra grip when you need it most. These pedal covers include all necessary hardware for installation and will look great in your BMW.

Note: Footrest/dead pedal is NOT included with this set. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Innovate Motorsports MTX Digital Series "Dual Function" Gauges

Explore the latest Innovate Motorsports MTX Digital Series "Dual Function" Gauges now available for your vehicle! These 2 1/16” (52mm) gauges offer versatile features including interchangeable faceplates and bezels, simplified installation with locking connectors, and MTS serial connections enabling seamless connectivity with other Innovate devices for logging purposes.

DISPLAY RANGE:

• Fuel Pressure: 0-145 PSI (10 Bar) sensor (Wide range +45 PSI over prior version)
• Temperature: 120-280 °F (49-138 °C)

KEY FEATURES:

• Pressure Display: PSI or BAR options (Digital Display)
• Programmable Low Oil Pressure Warning (Digital Display)
• Customizable Temperature Display with Exterior LED options
• LED Range Programming with Color Customization
• Unit of Measure Selection: °F or °C
• Oil Temperature Warning Programming (outer LED)

KIT INCLUDES:

• Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate
• Program Cable (Serial)
• Thermistor
• Electronic Pressure Sensor
• Cable for Pressure Sensor
• Quick Start Installation Guide

*Universal fitment gauge - Non application-specific - Installation may vary dependent on vehicle*

The WeatherTech® All-Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub-zero weather.  These All-Weather Floor Mats also have anti-skid ridges to prevent shifting in your vehicle and come with a protective, non-stick finish to make cleanup quick and easy.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

FloorLiners are laser measured to protect the front, back and even up the sides of your vehicle's footwell. For ultimate strength and dependability, FloorLiners feature high-density core materials and are engineered with advanced surfacing that carries messes away from shoes and clothing.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

Keep your left foot planted through the corners. 

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3

There are many benefits to installing harnesses in your E36 -

• maintain a proper driving position
• keep you planted in the seat and not bracing with your left leg or shoulder
• lower lap times thanks to improved driver confidence
• advanced technology is safer than standard 3-point belts
• Schroth Quick-Fit harness integrates with standard tensioner and airbag logic

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Schroth Quick Fit line of tuning harnesses are the most advanced 4-point safety belt on the market. They are perfect for daily street or dual-duty street-track use. Quick Fit harnesses mount with the existing female belt receptacles and the reinforced seat belt anchor points in the chassis. By using the standard receptacles the vehicle's SRS system remains active, adjusting airbag deployment and tensioner response accordingly. Other harnesses that do not clip into the stock belt recepacles may not integrate with the SRS with potentially harmful results. On factory BMW systems the SRS also employs a pyrotechnic charge that automatically tightens the belt in anticipation of a crash. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Schroth has revolutionized the racing and tuning harness industry which is why you will find their safety belts on everything from rally cars to military helicopters.

Quick Fit and Quick Fit Pro harnesses are vehicle-specific with the correct anchor points and seat belt clips included. The main harness is easily un-clipped and removed from the car with almost no trace left behind. Quick Fit and Quick Fit Pro use different latch types with the Pro being compatible with a HANS device and a slightly better and safer overall design. All Schroth Tuning harnesses are TUV approved.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

QuickFit Harness Summary:

• Suggested Use:  track, autocross, daily driver
• Shoulder Belt:  2" pull down
• Lap Belt:  2" pull down
• Buckle:  Rallye push button
• Installation:  click in/click out with stock receptacles; partial permanent bolt-in
• Seat Compatability:  approved only for stock seats
• HANS compatible?  No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Retain your window functionality while cleaning up your interior and saving weight. Installing these in conjunction with the front door panel deletes saves 16 lbs of precious weight over the factory door cards, while still maintaining a clean appearance in your interior. 

Features:​

• Black powder coated aluminum
• Pre-drilled mounting holes for simple installation
• Includes red door pulls
• Includes mounting hardware

Based in Baton Rouge, Louisiana, MKAH Motorsports custom designs unique solutions to solve issues that come along with saving weight in your BMW. All parts are precision cut to ensure parts integrate seamlessly in your vehicle - saving you weight while making your car stand out from the crowd.

This product fits the following BMWs:
1990 - 1999 E36 Sedan 318i 320i 325i 328i M3