BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:23714966
Part#: STUDCONVKITKT
Back Ordered
Sale - Save 8% $ 179.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.59 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 179.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.59 USD
Free Shipping on orders $49 and up

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

  • Simplifies spacer usage with a single application designed for various spacer widths
  • Wheel studs act as a wheel hanger, easing wheel installation
  • Reduces constant wheel bolt removal, minimizing wear on wheel hubs
  • Facilitates quick and easy tire changes as the studs stay in the hub
  • Recommended torque of 15Nm with thread-locking compound during installation
  • Compatible with spacers up to 20mm in size
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583537
Part#: S5XPISKT
In Stock
Sale - Save 24% $ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping
Sale - Save 24%
$ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:30164593
Part#: 11120034108KT3
In Stock
Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555452
Part#: LMOCK27KT
In Stock
Sale - Save 14% $ 114.99

This product was last offered at the strikethrough price on
05-15-2026

$ 99.44 USD
Free Shipping
Sale - Save 14%
$ 114.99

This product was last offered at the strikethrough price on
05-15-2026

$ 99.44 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555443
Part#: LMOCK17KT
In Stock
Sale - Save 1% $ 108.79

This product was last offered at the strikethrough price on
03-09-2026

$ 107.95 USD
Free Shipping
Sale - Save 1%
$ 108.79

This product was last offered at the strikethrough price on
03-09-2026

$ 107.95 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Hengst Oil Filter Kit
  • Febi Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099849
Part#: 51718184574TKT
Ships on Aug 19, 2026
Sale - Save 25% $ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.08 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.08 USD
Free Shipping on orders $49 and up
Everything you need to install M-Tech/M3 side skirts on your E36!

Packaged by Turner - Corporate Logo
T#:23748107
Part#: E36WNDWTRIMKT
In Stock
Sale - Save 3% $ 544.99

This product was last offered at the strikethrough price on
06-15-2026

$ 531.34 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 544.99

This product was last offered at the strikethrough price on
06-15-2026

$ 531.34 USD
Free Shipping on orders $49 and up

Protect your BMW from the harsh elements and sun damage with these durable replacement window moldings. Over time, your vehicle's moldings deteriorate, impacting both aesthetics and functionality. Replacing them not only enhances your car's exterior appeal but also ensures a secure seal against external elements.

Benefits:

  • Enhances exterior appeal
  • Provides a tight seal against elements
  • Durable replacement for sun-damaged moldings
  • Compatible with various BMW models
Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555435
Part#: LMOCK6KT
In Stock
Sale - Save 1% $ 104.99

This product was last offered at the strikethrough price on
03-09-2026

$ 104.07 USD
Free Shipping
Sale - Save 1%
$ 104.99

This product was last offered at the strikethrough price on
03-09-2026

$ 104.07 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Oil Filter Kit
  • Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583538
Part#: M54PISKT
In Stock
Sale - Save 20% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping
Sale - Save 20%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Flex Disc Replacement Kit - Z3M, Z4M, E36 E46 M3, E34 M5
For vehicles with manual transmissions only
Packaged by Turner - Corporate Logo
T#:24212302
Part#: 26112226527TKT
In Stock
Sale - Save 30% $ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Comes with a flex disc (giubo), and all essential mounting hardware to ensure a complete and secure driveshaft installation.


Packaged by Turner - Corporate Logo
T#:555447
Part#: LMOCK21KT
In Stock
$ 99.65 USD
Free Shipping
$ 99.65 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Mann Engine Oil Filter
  • Febi Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:348631
Part#: TEN3649SK1KT
Back Ordered
Sale - Save 3% $ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
Sale - Save 3%
$ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken?) exhaust manifold studs on your M50-family engine's head (including M50, M52, S50, S52). The perfect time to preventatively replace your exhaust studs is anytime you remove the manifolds (perhaps to install headers) or are removing the head or complete engine. Kit includes the correct number of OEM studs, copper locking nuts, and also includes two jam-nuts to be used for removing your old studs and installing the new studs. This stud and nut kit Fits 325i, 325is, 328i, 328is, 323is, E36 M3 (3.0 & 3.2 liter), E34 525i (91+), E39 528i, Z3 2.8.

This item fits the following BMWs:
1992-1998  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995  E34 BMW  525i
1997-1998  E39 BMW  528i
1997-1998  Z3 BMW  Z3 2.8 M Roadster M Roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401619
Part#: 16116762417KT1
In Stock
Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping
Sale - Save 18%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Show More Show Less

Driveshaft Overhaul Kit - With Giubo and CSB - E36
For vehicles with manual transmissions only
For vehicles with manual transmissions only
Packaged by Turner - Corporate Logo
T#:41222052
Part#: 261175114541FKT
Ships on Aug 20, 2026
Sale - Save 7% $ 194.99

This product was last offered at the strikethrough price on
04-09-2026

$ 182.11 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 194.99

This product was last offered at the strikethrough price on
04-09-2026

$ 182.11 USD
Free Shipping on orders $49 and up
The smart, performance-driven solution for maintaining your BMW’s legendary balance of power, comfort, and handling.

Packaged by Turner - Corporate Logo
T#:401630
Part#: 35311158659KT1
In Stock
Sale - Save 2% $ 210.99

This product was last offered at the strikethrough price on
06-16-2026

$ 206.60 USD
Free Shipping
Sale - Save 2%
$ 210.99

This product was last offered at the strikethrough price on
06-16-2026

$ 206.60 USD
Free Shipping
Replace and upgrade your clutch pedal at the same time with this kit. Kit includes new clutch pedal, pedal pad, springs, grommets, and ECS Delrin Clutch pedal bushings.  
Packaged by Turner - Corporate Logo
T#:569016
Part#: E36M3PSSKT
In Stock at Vendor
Sale - Save 14% $ 364.99

This product was last offered at the strikethrough price on
06-16-2026

$ 315.38 USD
Free Shipping
Sale - Save 14%
$ 364.99

This product was last offered at the strikethrough price on
06-16-2026

$ 315.38 USD
Free Shipping
BMW power steering systems can be a pain when it comes to leaks, especially as the car ages. The hoses break down and the power steering filter in the reservoir becomes contaminated. To restore leak free, smooth operation of your power steering, we offer these Turner Motorsport Comprehensive Power Steering Service Kits. These kits contain all of the items you will need to replace old components with new OEM quality hoses, seals, and a new reservoir as well as the recommended power steering fluid for your BMW! This kit is great for routine maintenance or for when replacing your power steering pump or steering rack!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555426
Part#: LMOCK1KT
In Stock
Sale - Save 1% $ 110.99

This product was last offered at the strikethrough price on
03-09-2026

$ 109.89 USD
Free Shipping
Sale - Save 1%
$ 110.99

This product was last offered at the strikethrough price on
03-09-2026

$ 109.89 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui-Moly Longtime High Tech 5w-30 Engine Oil
Mann Oil Filter
Febi Oil Drain Plug & Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:14288
Part#: TMS14288
Ships in 6 Business Days
Sale - Save 26% $ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.73 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.73 USD
Free Shipping on orders $49 and up
The crankcase vent valve (CVV) holds and releases oil vapors that build up in the engine. It's the same type of system previously known as a PCV valve and the same deficiencies exist. Over time, the CVV will become saturated and clogged with oil. When this happens, the oil-rich vapors from the engine will back up into the intake tract and eventually into the combustion chamber. The oil added to the gasoline/air mix will cause misfires, carbon deposits, rough running, and blue smoke out the tailpipe. Replacing the CVV every 70,000 miles will ensure the correct and clean ventilation of oil vapor.

Replacement of the CVV can be done without removing the intake manifold. But replacing it during an M50 Manifold upgrade is the perfect time.

Included:
11151703484 - crankcase vent valve
13411733217 - sealing grommet

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:6181664
Part#: TWH9905003T
In Stock
Sale - Save 3% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
Sale - Save 3%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5403232
Part#: 31226757024TMSKT
In Stock
Sale - Save 23% $ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Sale - Save 23%
$ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Includes left and right bearing, nuts, dust caps and Schwaben 46mm socket for ease of installation A failing wheel bearing may translate excessive vibration through the steering wheel, a noticeable hum while driving at speed, and a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:558353
Part#: E36RPRPKT3
In Stock
Sale - Save 8% $ 158.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.00 USD
Free Shipping
Sale - Save 8%
$ 158.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.00 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Textar Rear Brake Pads
  • Zimmerman Rear Rotors
  • New Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/is/ic 323is 325i/is/ic 328i/is

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555441
Part#: LMOCK15KT
In Stock
Sale - Save 14% $ 114.99

This product was last offered at the strikethrough price on
05-15-2026

$ 99.44 USD
Free Shipping
Sale - Save 14%
$ 114.99

This product was last offered at the strikethrough price on
05-15-2026

$ 99.44 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:5649941
Part#: E36M396USRKT
In Stock
Sale - Save 13% $ 507.99

This product was last offered at the strikethrough price on
05-03-2026

$ 441.62 USD
Free Shipping
Sale - Save 13%
$ 507.99

This product was last offered at the strikethrough price on
05-03-2026

$ 441.62 USD
Free Shipping
Stock rubber bushings and plastic inserts wear down quickly with age, leading to a shifter that is loose, soft, and sloppy. A sloppy shifter greatly detracts from your driving pleasure. If you want to bring back that factory crisp shifter, this kit will do that for you and then some! Not only will it totally overhaul your shifter, but also make it perform better than stock thanks to the ECS Tuning Teflon Oval Shifter Bushings, Turner Motorsport Poly Shifter Arm Bushing, and Turner Motorsport DSSR included in the kit. These parts working together will eliminate all side-to-side and fore-and-aft slop, giving you significantly more engaging shifts. Included: Turner Motorsport Double Shear Selector Rod (DSSR) - Replaces BMW 25111222738 Turner Motorsport Polyurethane Shifter Arm Bushing ECS Teflon Oval Shifter Bushings Plastic Washers Rubber Shifter Boot Dowel & Bearing Pins Shifter Ball Bushing Shifter Rod Joint Necessary Hardware
Show More Show Less
Packaged by Turner - Corporate Logo
T#:37453570
Part#: 054834LA01KT
In Stock
Sale - Save 2% $ 417.67

This product was last offered at the strikethrough price on
05-03-2026

$ 408.71 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 417.67

This product was last offered at the strikethrough price on
05-03-2026

$ 408.71 USD
Free Shipping on orders $49 and up

The ZF 320z S5D is a common swap choice among BMW enthusiasts due to its reliable and robust nature. Unfortunately, it does have a weakness. The detent pins and springs that live inside of the transmission are known to wear down over time, often causing the shift lever to lean towards the 5th gear position when in neutral.

This full-service kit consists of everything you need to replace the failing detents in your ZF transmission. The kit contains only Genuine ZF components, all of which are sure to provide you with smooth shifting and operation for years to come.

This kit includes the following items:

3 Shift Pin Kits - 23117525048
2 Slide Bushings - 23117533395
2 Gearbox sealing lids - 23311224825
1 Shifter detent pin - 23311224849
1 Shifter detent pin - 23317502165
2 Lock Rings - 23317531374
3 Spring Retention Plates - 23317637524
5 Detent Drift/Punch Tools - 054834LA01AKT
Remedying the ZF's detent issue is a must for any enthusiast planning to get the most out of their transmission. Proper centering is essential for quick and smooth shifting, both being desirable features in any application. This kit is easy to install with several DIY guides existing online. A set of "drift" tools are included for proper installation.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555726
Part#: PBTSRKT29
In Stock
Sale - Save 8% $ 307.99

This product was last offered at the strikethrough price on
05-03-2026

$ 283.85 USD
Free Shipping
Sale - Save 8%
$ 307.99

This product was last offered at the strikethrough price on
05-03-2026

$ 283.85 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:558360
Part#: E36M3RPRPKT
Ships on Aug 13, 2026
Sale - Save 7% $ 564.99

This product was last offered at the strikethrough price on
01-21-2026

$ 524.12 USD
Free Shipping
Sale - Save 7%
$ 564.99

This product was last offered at the strikethrough price on
01-21-2026

$ 524.12 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Pagid Front & Rear Brake Pads
  • Pagid Front & Rear Rotors
  • New Front & Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW M3 S52/S50
Z3 BMW M Coupe/Roadster S52/S54

Show More Show Less

Packaged by Turner - Corporate Logo
T#:337951
Part#: 11120034108
In Stock
Starting at $ 70.25 USD
Free Shipping
Starting at $ 70.25 USD
Free Shipping
Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:553667
Part#: 31336779613KT2
Ships in 5 Business Days
Sale - Save 9% $ 345.99

This product was last offered at the strikethrough price on
05-03-2026

$ 316.04 USD
Free Shipping
Sale - Save 9%
$ 345.99

This product was last offered at the strikethrough price on
05-03-2026

$ 316.04 USD
Free Shipping

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

E36 318i/ic/is 323i/ic/is 325i/is/ic 328i/is/ic 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:51356040
Part#: 059015LA02KT2KT
Ships on Oct 5, 2026
New Item
Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD
Free Shipping on orders $49 and up

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less
Packaged by Turner - Corporate Logo
T#:343068
Part#: TSU9995PB3KT
In Stock
Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Sale - Save 18%
$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:26704980
Part#: 006585LA01-01KT2
In Stock
Sale - Save 3% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.56 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.56 USD
Free Shipping on orders $49 and up

Upgrade your throttle cable and bushings with Turner's comprehensive replacement kit. Designed to address common issues like poor throttle response and control, this kit includes a Genuine BMW cable, accelerator pedal bushing, and upgraded aluminum throttle cable bushings. Experience smoother rev-matching, eliminate sluggish throttle response, and regain proper throttle control. Don't let neglected throttle components ruin your driving experience – invest in Turner Motorsport's solution today.

Benefits:

Genuine BMW throttle cable for reliability you can count on Upgraded aluminum throttle cable bushings for enhanced durability and a tighter-than-factory accelerator feel Improved throttle response and control Eliminates sluggish throttle response Includes all necessary components for a complete overhaul

Show More Show Less

Packaged by Turner - Corporate Logo
T#:25739342
Part#: 7599219TMS1KT
In Stock
Sale - Save 11% $ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM Bosch Platinum+4 spark plugs, and AGS dielectric grease. The new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Bosch Platinum+4 Replacement Spark Plugs Premium AGS Dielectric Grease Included
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42133544
Part#: 835225790TKT
In Stock
$ 59.72 USD
Free Shipping on orders $49 and up
The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5
Packaged by Turner - Corporate Logo
T#:6181661
Part#: TWH9905013T
In Stock
Sale - Save 25% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
Sale - Save 25%
$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less


Packaged by Turner - Corporate Logo
T#:555714
Part#: PBTSRKT18
Ships in 3 Business Days
Sale - Save 3% $ 641.44

This product was last offered at the strikethrough price on
06-15-2026

$ 625.11 USD
Free Shipping
Sale - Save 3%
$ 641.44

This product was last offered at the strikethrough price on
06-15-2026

$ 625.11 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer. This shift kit will reduce the shifter throw by 30%!

Also included is the BMW fan favorite OE ZHP shift knob that will add a sportier look to your shifter.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416757
Part#: 33521092362TMSKT
Ships on Oct 2, 2026
Sale - Save 11% $ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD
Free Shipping
Sale - Save 11%
$ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD
Free Shipping
Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty rear shock mount reinforcement plates Locking nuts Select your vehicle for additional fitment information. **Note** Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your damper and source accordingly.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338684
Part#: TMS2003
Ships in 5 Business Days
Sale - Save 12% $ 668.99

This product was last offered at the strikethrough price on
02-27-2026

Starting at $ 587.60 USD
Free Shipping on orders $49 and up
Sale - Save 12%
$ 668.99

This product was last offered at the strikethrough price on
02-27-2026

Starting at $ 587.60 USD
Free Shipping on orders $49 and up
This is a compete cooling system overhaul kit, which includes all of the common E36 cooling system parts bundled into a complete package. The basic overhaul includes: water pump, radiator, radiator hoses, and thermostat. We bundled these together with a package discount for your convenience and savings. Additional items are also available to better cover your cooling system repair. Contact us if you need any other E36 cooling system parts.

The original E36's primary cooling components were prone to failure within 60k miles (or less in many cases). With better materials over the years we've seen that interval increase and you can now count on your water pump and radiator lasting at least 100,000 miles. That doesn't mean you can set aside preventaive maintenance. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system.

Top Turner Tip!
The very earliest E36s had infamous cooling system failures. But those are a thing of the past! We've got the best combination of parts to ensure a bulletproof E36 cooling system and it doesn't have to cost an arm and a leg. Our basic cooling package (OEM radiator and OE BMW water pump with composite impeller) is much better quality than what was available 20 years ago. And we can upgrade the system with full aluminum radiators, silicone hoses, and a stronger water pump. There are no more excuses for a weak E36 cooling system.

Basic Kit Contents:
17111469179, radiator (OEM Behr)
11517527799, water pump (OE BMW)
11537511580, 88°C thermostat (OEM Behr/Hella)
11531708499, upper radiator hose (OEM Rein/CRP)
11531726344, lower radiator hose (OEM Rein/CRP)
17111742231, expansion tank cap (OEM Behr/Hella)

Cooling Kit Options:
E36 Water Pump Options
(click to expand)
OE BMW with composite impeller. The original BMW water pumps had plastic impellers which degraded and failed. The latest design uses composites that are much better and will not corrode. Compared to a metal impeller, the composite is lighter so it's more efficient and it will not wear out the bearings. We don't even offer the metal impeller pumps with this kit because the BMW composite one is so much better.
Stewart high performance. The ultimate in M50 water pumps! It features a stainless steel impeller, heavy-duty bearings, a better o-ring seal, and flows 20% more than the stock pump. If indestructible is what you're looking for, this is the pump to go with. It also comes with a lifetime warranty for piece of mind.
E36 Radiators
(click to expand)
The stock radiator and fan combination has no downside in capacity. But where it lacks is in durability. The plastic tanks and hose necks are prone to cracking and then leaking. If you notice ANY greenish-white staining on the plastic then it's a sure sign of a crack. To avoid the plastic failures altogether, move up to a full aluminum radiator.

The MZ3 radiator has a thicker core and more capacity. Any time you can store the coolant away from the engine the better it will be. It will have less heat soak and lower overall temperatures.
The budget aluminum radiator is the same size as stock but obviously doesn't have the plastic.
The Fluidyne was designed with input from our own techs and race team. It's our go-to radiator for racing and track use.
E36 Expansion Tank
(click to expand)
The original expansion tank is prone to cracks and leakage. Again - it's made from a weak plastic. The material has improved over the years but the only option remains an OEM plastic tank. It's a good idea to replace it if you're doing a whole overhaul. Don't re-use the original tank if you're going to the trouble of replacing everything else!
E36 Thermostat Housing
(click to expand)
The original BMW plastic thermostat housing is brittle and does not seal well. We only sell it under protest. Instead we've been selling this aluminum housing for the last 20+ years. The aluminum does not have the same shortcomings as the plastic one. We made this item an option in case you already have the aluminum housing.

Use the options below to build your cooling package.

This cooling system overhaul kit fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Show More Show Less

Packaged by Turner - Corporate Logo
T#:2843
Part#: TMS2843
In Stock
Sale - Save 5% $ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD
Free Shipping
Sale - Save 5%
$ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD
Free Shipping
1993-94 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe cold air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1993-94 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5498489
Part#: E36Z3CAKT
In Stock
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 312.39 USD
Free Shipping
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 312.39 USD
Free Shipping
Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 contains: 2 Meyle HD front control arms 2 M3 front control arm bushings
Show More Show Less
Packaged by Turner - Corporate Logo
T#:337962
Part#: 11129069861
In Stock
Sale - Save 12% $ 255.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 225.23 USD
Free Shipping
Sale - Save 12%
$ 255.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 225.23 USD
Free Shipping
Full set of replacement gaskets, seals, and o-rings for when you're overhauling the cylinder head from an S52 engine. This set conveniently comes with everything you should need when rebuilding the cylinder head.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

Complete Parts List
(click to expand)
BMW p/nQtyDescription
071199631303coolant sensor o-ring,
block coolant connector o-ring
071199632001block coolant drain seal ring
071199632012exhaust manifold plug gasket ring
071199634181timing chain tensioner o-ring
111214051061head gasket
111217389631rear coolant flange gasket
111290705321valve cover gaskets,
main valve cover, spark plug holes
113490644572valve stem seals,
2 packs = 24 valves
113617408401VAN0S unit profile gasket
115312650841thermostat o-ring
115317404371thermostat housing profile gasket
116117161741throttle body-to-manifold o-ring gasket
11611740692intake manifold-to-head profile gasket
116217442522exhaust manifold-to-head gasket plate
121417483981cam position sensor o-ring
135317202511fuel pressure regulator o-ring
135317202521fuel pressure regulator o-ring
136217432991intake air temp sensor o-ring
1364173076712fuel injector o-ring
183017168882exhaust manifold flange gasket
324110935962VAN0S oil line o-ring


This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMW MZ3 Roadster, Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:22130428
Part#: 11281437929TKT
In Stock
Sale - Save 8% $ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 264.99

This product was last offered at the strikethrough price on
05-03-2026

$ 244.54 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulleys and cracked drive belts with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, an OEM A/C belt, belt tensioners, an idler pulley, and the hardware required for installation ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the belts, rollers, and tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555719
Part#: PBTSRKT23
In Stock
Sale - Save 8% $ 305.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.22 USD
Free Shipping
Sale - Save 8%
$ 305.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.22 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:25768
Part#: CIKE36328
Ships in 1-2 days
Sale - Save 3% $ 217.71

This product was last offered at the strikethrough price on
06-15-2026

$ 211.15 USD
Free Shipping
Sale - Save 3%
$ 217.71

This product was last offered at the strikethrough price on
06-15-2026

$ 211.15 USD
Free Shipping
Installing a clutch is a job you want to do right the first time. Our comprehensive kit includes all the gaskets, seals, and hardware necessary for a standard clutch replacement. Believe me it is no fun to have the car apart only to find you need some additional parts or to find out you have to drop the transmission for the second time to replace a leaking seal.

Complete Parts List
(click to expand)
BMW p/nQtyDescription
071199060456Pressure Plate Bolt
11142249533 1Rear Main Seal
11211720310 1Pilot Bearing
11222243051 8flywheel bolt
18301716888 2Exhaust Manifold to Cat Gasket
18301737774 6Exhaust Flange Nut
21511223328 1Clutch Pivot Pin
21517570284 1Clutch Spring Clip
23111224799 1Transmission Output Seal
23121282394 1Selector Rod Seal
23211224820 1Input Seal


This item fits the following BMWs:
1996-1998 E36 BMW 328i 328is 328ic
Show More Show Less

Packaged by Turner - Corporate Logo
T#:6181662
Part#: TWH9905005T
In Stock
Sale - Save 25% $ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
Sale - Save 25%
$ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Packaged by Turner - Corporate Logo
T#:597185
Part#: E36M3BLRFKT2
In Stock
Sale - Save 13% $ 426.99

This product was last offered at the strikethrough price on
05-03-2026

$ 371.40 USD
Free Shipping
Sale - Save 13%
$ 426.99

This product was last offered at the strikethrough price on
05-03-2026

$ 371.40 USD
Free Shipping
Turner Motorsport stainless steel brake lines with fluid and tools for a complete DIY
Packaged by Turner - Corporate Logo
T#:6181670
Part#: TWH9905020T
In Stock
Sale - Save 42% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
Sale - Save 42%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less


Packaged by Turner - Corporate Logo
T#:30164630
Part#: 11120034108KT5
In Stock
Sale - Save 22% $ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:340153
Part#: TMS2844
In Stock
Sale - Save 15% $ 862.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 733.54 USD
Free Shipping
Sale - Save 15%
$ 862.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 733.54 USD
Free Shipping
1995 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFE uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1995 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (we need your car's production date, choose from below)

Applications:
1995 E36 325i, 325is, 325ic
Show More Show Less