BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:583537
Part#: S5XPISKT
In Stock
Sale - Save 24% $ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping
Sale - Save 24%
$ 269.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.78 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555452
Part#: LMOCK27KT
Ships on Sep 15, 2026
$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555443
Part#: LMOCK17KT
In Stock
$ 120.42

This product was last offered at the strikethrough price on
08-04-2026

$ 118.58 USD
Free Shipping
$ 118.58 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Hengst Oil Filter Kit
  • Febi Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555447
Part#: LMOCK21KT
In Stock
$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Mann Engine Oil Filter
  • Febi Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583538
Part#: M54PISKT
Ships on Sep 15, 2026
Sale - Save 20% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping
Sale - Save 20%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555435
Part#: LMOCK6KT
In Stock
$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Oil Filter Kit
  • Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:401619
Part#: 16116762417KT1
In Stock
Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping
Sale - Save 18%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:402762
Part#: M50LMOCP1
In Stock
$ 128.99

This product was last offered at the strikethrough price on
08-17-2026

Starting at $ 127.97 USD
Free Shipping
Starting at $ 127.97 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

1990-1996 E34 525i
1991-2000 E36 320i 323i 323ti 325i 328i 328is
1995-2004 E39 520i 523i 525i 528i 530i
1997-2002 E36/7 Z3 2.0i Z3 2.2i Z3 2.5i Z3 2.8 Z3 3.0i
1998-2006 E46 320I 320Ci 323i 323ci 325i 325xi 325Ci 328i 328Ci 330i 330xi 330Ci
1995-2000 E38 728i 728iL 
2002-2005 E85 Z4 2.2i Z4 2.5i Z4 3.0i
2003-2005 E60/E61 520i 525i 525xi 530i
2003-2006 E83 X3 2.5i X3 3.0i 
2000-2006 E53 X5 3.0i
2002-2005 E65/E66 730i 730Li

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:348631
Part#: TEN3649SK1KT
Back Ordered
Sale - Save 3% $ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
Sale - Save 3%
$ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD
Free Shipping
This convenient kit includes all the hardware you need to replace your old, rusted (or broken?) exhaust manifold studs on your M50-family engine's head (including M50, M52, S50, S52). The perfect time to preventatively replace your exhaust studs is anytime you remove the manifolds (perhaps to install headers) or are removing the head or complete engine. Kit includes the correct number of OEM studs, copper locking nuts, and also includes two jam-nuts to be used for removing your old studs and installing the new studs. This stud and nut kit Fits 325i, 325is, 328i, 328is, 323is, E36 M3 (3.0 & 3.2 liter), E34 525i (91+), E39 528i, Z3 2.8.

This item fits the following BMWs:
1992-1998  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995  E34 BMW  525i
1997-1998  E39 BMW  528i
1997-1998  Z3 BMW  Z3 2.8 M Roadster M Roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:390849
Part#: E36EXHHANGERS
Ships in 3 Business Days
Starting at $ 103.52 USD
Free Shipping
Starting at $ 103.52 USD
Free Shipping
Complete set of hangers and hardware for the E36 325/328/M3 exhaust. Choose from only the rubber hangers, the metal hangers on the rear muffler with gaskets and hardware, or everything together. This kit is essential when removing the exhaust or upgrading to a performance cat-back.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:402749
Part#: S50LMOCP1
In Stock
$ 135.99

This product was last offered at the strikethrough price on
08-04-2026

Starting at $ 131.97 USD
Free Shipping
Starting at $ 131.97 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:
1994-1995 E36 M3 
1996-1999 E36 M3
1998-2000 E36/7/8 Z3M

Show More Show Less


Packaged by Turner - Corporate Logo
T#:337971
Part#: 11311405081
Ships in 3 Business Days
Starting at $ 113.17 USD
Free Shipping
Starting at $ 113.17 USD
Free Shipping
The timing chain tensioner from the 1995 E36 M3 is a great upgrade for other Motorsport models - 1988-1991 E30 M3 and 1989-1995 E34 M5! This tensioner virtually eliminates the cold start-up engine rattle so common with the S14 and S38 engines. It makes the whole engine quieter and smoother. Any new tensioner will accomplish that but the S50 tensioner has several new features that make it superior to the original design. This unit also has a internally loaded spring, so installation is much easier than the old style tensioner (no need to squeeze the spring and hold it while installing). Includes oil seal ring (not pictured).

This item fits the following BMWs:
1985-1989 E24 BMW M635CSi M6 - M88/3, S38B35 engine
1988 E28 BMW M5 - M88/3, S38B35 engine
1988-1991 E30 BMW M3 - S14 engine
1989-1995 E34 BMW M5 - S38 engine
1995 E36 BMW M3 - S50B30US engine
1994-1999 E36 BMW M3 Euro - S50B30 and S50B32 engines
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401630
Part#: 35311158659KT1
Ships in 3 Business Days
Sale - Save 2% $ 210.99

This product was last offered at the strikethrough price on
06-16-2026

$ 206.60 USD
Free Shipping
Sale - Save 2%
$ 210.99

This product was last offered at the strikethrough price on
06-16-2026

$ 206.60 USD
Free Shipping
Replace and upgrade your clutch pedal at the same time with this kit. Kit includes new clutch pedal, pedal pad, springs, grommets, and ECS Delrin Clutch pedal bushings.  
Packaged by Turner - Corporate Logo
T#:569016
Part#: E36M3PSSKT
Ships on Feb 10, 2027
Sale - Save 5% $ 364.99

This product was last offered at the strikethrough price on
06-16-2026

$ 348.18 USD
Free Shipping
Sale - Save 5%
$ 364.99

This product was last offered at the strikethrough price on
06-16-2026

$ 348.18 USD
Free Shipping
BMW power steering systems can be a pain when it comes to leaks, especially as the car ages. The hoses break down and the power steering filter in the reservoir becomes contaminated. To restore leak free, smooth operation of your power steering, we offer these Turner Motorsport Comprehensive Power Steering Service Kits. These kits contain all of the items you will need to replace old components with new OEM quality hoses, seals, and a new reservoir as well as the recommended power steering fluid for your BMW! This kit is great for routine maintenance or for when replacing your power steering pump or steering rack!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555686
Part#: PBTSRKT1
In Stock
$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555426
Part#: LMOCK1KT
Ships in 4 Business Days
$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui-Moly Longtime High Tech 5w-30 Engine Oil
Mann Oil Filter
Febi Oil Drain Plug & Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:6181664
Part#: TWH9905003T
In Stock
Sale - Save 3% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
Sale - Save 3%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5403288
Part#: 32111139316TMSKT
In Stock
$ 198.99

This product was last offered at the strikethrough price on
03-01-2026

$ 172.99 USD
Free Shipping
$ 172.99 USD
Free Shipping
The tie rods in your vehicle translate the movement of the steering wheel through the rack and to your wheels. Oftentimes when a vehicle is beginning to experience some higher mileage, the tie rod ends begin to fail. This causes slop in the steering wheel and knocks and creaks in the steering system. Catastrophic tie rod end failure can cause serious damage and danger as the tie rod end keeps the wheel path straight. Replace your tie rods for some cheap insurance against dangerous failures. These tie rod ends will offer dramatic improvements over worn original units. Tighter, quieter steering and a more responsive wheel can be expected. A great way to stay safe on the road. Includes complete left and right tie rod assemblies, hardware and new boots.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403232
Part#: 31226757024TMSKT
In Stock
Sale - Save 23% $ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Sale - Save 23%
$ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Includes left and right bearing, nuts, dust caps and Schwaben 46mm socket for ease of installation A failing wheel bearing may translate excessive vibration through the steering wheel, a noticeable hum while driving at speed, and a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555441
Part#: LMOCK15KT
Ships on Sep 15, 2026
$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:388172
Part#: E46135BRAKE
Ships in 3 Business Days
Starting at $ 2,334.97 USD
Free Shipping
Starting at $ 2,334.97 USD
Free Shipping

135/BMW Performance brakes for your E36 and E46! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with E46 330-sized rotors (325x25mm / 12.8") for a bolt on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper bracket, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation).

Brake rotor options -

  • OEM Pagid Coated - blank rotors with anti-corrosion coating
  • Turner/Centric cross-drilled
  • Turner/Centric slotted
  • Turner/Cetnric cross-drilled & slotted
  • BMW Peformance floating and cross-drilled
  • ECS 2-piece floating with cross-drilled and slotted

Brake pad options -

  • OEM Textar (same as stock 135i)
  • Centric Posi-Quiet - nearly dust-free (Turner preferred!)
  • Hawk Ceramic nearly dust-free
  • Hawk HPS performance
  • StopTech performance

This is a direct fit to all E36 and E46 (not E46 M3) and comes with a lot more braking power than standard (especially on non-M E36). Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. E46 Style 68 wheels shown are used with 5mm spacer.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555726
Part#: PBTSRKT29
In Stock
Sale - Save 8% $ 307.99

This product was last offered at the strikethrough price on
05-03-2026

$ 283.85 USD
Free Shipping
Sale - Save 8%
$ 307.99

This product was last offered at the strikethrough price on
05-03-2026

$ 283.85 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:558353
Part#: E36RPRPKT3
Ships in 2 Business Days
Sale - Save 6% $ 158.99

This product was last offered at the strikethrough price on
05-03-2026

$ 150.19 USD
Free Shipping
Sale - Save 6%
$ 158.99

This product was last offered at the strikethrough price on
05-03-2026

$ 150.19 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Textar Rear Brake Pads
  • Zimmerman Rear Rotors
  • New Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/is/ic 323is 325i/is/ic 328i/is

Show More Show Less


Packaged by Turner - Corporate Logo
T#:558360
Part#: E36M3RPRPKT
Ships in 2 Business Days
Sale - Save 2% $ 560.99

This product was last offered at the strikethrough price on
05-03-2026

$ 549.92 USD
Free Shipping
Sale - Save 2%
$ 560.99

This product was last offered at the strikethrough price on
05-03-2026

$ 549.92 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Pagid Front & Rear Brake Pads
  • Pagid Front & Rear Rotors
  • New Front & Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW M3 S52/S50
Z3 BMW M Coupe/Roadster S52/S54

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5649941
Part#: E36M396USRKT
In Stock
Sale - Save 13% $ 507.99

This product was last offered at the strikethrough price on
05-03-2026

$ 441.62 USD
Free Shipping
Sale - Save 13%
$ 507.99

This product was last offered at the strikethrough price on
05-03-2026

$ 441.62 USD
Free Shipping
Stock rubber bushings and plastic inserts wear down quickly with age, leading to a shifter that is loose, soft, and sloppy. A sloppy shifter greatly detracts from your driving pleasure. If you want to bring back that factory crisp shifter, this kit will do that for you and then some! Not only will it totally overhaul your shifter, but also make it perform better than stock thanks to the ECS Tuning Teflon Oval Shifter Bushings, Turner Motorsport Poly Shifter Arm Bushing, and Turner Motorsport DSSR included in the kit. These parts working together will eliminate all side-to-side and fore-and-aft slop, giving you significantly more engaging shifts. Included: Turner Motorsport Double Shear Selector Rod (DSSR) - Replaces BMW 25111222738 Turner Motorsport Polyurethane Shifter Arm Bushing ECS Teflon Oval Shifter Bushings Plastic Washers Rubber Shifter Boot Dowel & Bearing Pins Shifter Ball Bushing Shifter Rod Joint Necessary Hardware
Show More Show Less
Packaged by Turner - Corporate Logo
T#:337951
Part#: 11120034108
In Stock
Starting at $ 70.25 USD
Free Shipping
Starting at $ 70.25 USD
Free Shipping
Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338078
Part#: 31226757024
In Stock
Starting at $ 143.97 USD
Free Shipping
Starting at $ 143.97 USD
Free Shipping

Front Wheel Hub Assembly with Bearing fits BMW E36 (including M3), E46 (not Xi, not M), Z3 incl MZ3. It is interchangable with part #31221468926 or 31221139345.

FAG is an OE supplier to BMW as well as several other German marques.

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.


This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
3/1991-1995 E34 BMW 525i 530i 535i 540i
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il
3/1992-1999 E31 BMW 840ci 850ci 850csi
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Packaged by Turner - Corporate Logo
T#:343068
Part#: TSU9995PB3KT
In Stock
Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Sale - Save 18%
$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555714
Part#: PBTSRKT18
Ships in 1 Business Day
Sale - Save 3% $ 641.44

This product was last offered at the strikethrough price on
06-15-2026

$ 625.11 USD
Free Shipping
Sale - Save 3%
$ 641.44

This product was last offered at the strikethrough price on
06-15-2026

$ 625.11 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer. This shift kit will reduce the shifter throw by 30%!

Also included is the BMW fan favorite OE ZHP shift knob that will add a sportier look to your shifter.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:6181661
Part#: TWH9905013T
In Stock
Sale - Save 25% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
Sale - Save 25%
$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338946
Part#: INSP2M52
In Stock
Starting at $ 124.98 USD
Free Shipping
Starting at $ 124.98 USD
Free Shipping
Keeping up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your E36 323 or 328 will ensure you get many more miles from your treasured BMW.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • install or clean magnetic drain plug
  • replace drain bolt crush washer
  • reset oil service/maintenance light
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire, including pressure, and tire-changing tools
  • inspect belts for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • lubricate throttle linkage
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
30,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line MTL or Motul 75W80
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
60,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line MTL or Motul 75W80
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • inspect main accessory pulleys for cracks
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

You may also want to pick up these other helpful items:
  • replace your drain plug with a magnetic one
  • Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    1996-1999 E36 BMW 323is 323ic 328i 328is 328ic with manual transmission


    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338140
    Part#: 34212227177
    In Stock at Vendor
    Starting at $ 69.99 USD
    Free Shipping
    Starting at $ 69.99 USD
    Free Shipping
    LEFT REAR; priced per rotor

    We offer a choice of brands to satisfy our customer's stringent quality standards -
    Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
    Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:553667
    Part#: 31336779613KT2
    Ships in 3 Business Days
    Sale - Save 8% $ 345.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 316.94 USD
    Free Shipping
    Sale - Save 8%
    $ 345.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 316.94 USD
    Free Shipping

    This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

    Fits the following BMW's

    E36 318i/ic/is 323i/ic/is 325i/is/ic 328i/is/ic 

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:303995
    Part#: TEN3680FRC
    Ships in 8 Business Days
    $ 151.99 USD
    Free Shipping
    $ 151.99 USD
    Free Shipping
    Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557244
    Part#: E36BCKT
    In Stock
    Sale - Save 18% $ 277.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 229.04 USD
    Free Shipping
    Sale - Save 18%
    $ 277.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 229.04 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:554687
    Part#: EFANCON1KT
    In Stock at Vendor
    $ 368.99

    This product was last offered at the strikethrough price on
    07-02-2026

    $ 367.99 USD
    Free Shipping
    $ 367.99 USD
    Free Shipping

    Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

    Included in this kit:

    • 80 degree Celsius thermostat
    • 1 liter of Genuine BMW coolant
    • Water Wetter coolant additive
    • Low-temperature coolant temperature sensor/switch
    • 16 inch Electric fan 
    • Electric fan mounting kit
    • Fan controller kit with probe sensor 
    • Fan delete nut

    Fits the following BMWs:
    09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5498489
    Part#: E36Z3CAKT
    Ships in 2 Business Days
    Sale - Save 6% $ 330.99

    This product was last offered at the strikethrough price on
    05-08-2026

    $ 312.39 USD
    Free Shipping
    Sale - Save 6%
    $ 330.99

    This product was last offered at the strikethrough price on
    05-08-2026

    $ 312.39 USD
    Free Shipping
    Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 contains: 2 Meyle HD front control arms 2 M3 front control arm bushings
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:556154
    Part#: E36DMKT
    In Stock
    $ 310.99 USD
    Free Shipping
    $ 310.99 USD
    Free Shipping

    Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder mounts are perfect to eliminate these problems and provide long lasting reliability.

    Included in this kit:

    • OEM Lemforder Engine Mount (x2)
    • OEM Lemforder Manual Transmission Mount (x2)
    • New Installation Hardware
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:555719
    Part#: PBTSRKT23
    In Stock
    Sale - Save 8% $ 305.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 282.22 USD
    Free Shipping
    Sale - Save 8%
    $ 305.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 282.22 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:556729
    Part#: M5XTISKT
    Ships on Sep 15, 2026
    $ 357.99

    This product was last offered at the strikethrough price on
    02-27-2026

    $ 286.99 USD
    Free Shipping
    $ 286.99 USD
    Free Shipping

    Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

    To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

    See kit contents below for a complete list of included components.

    Fits the following BMWs:
    E36 BMW M52 2.5L 2.5L
    E46 BMW M52, M54 (up to 09/2002)
    E53 BMW X5 M54 (up to 10/2002)

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338132
    Part#: 34211162289
    In Stock
    Starting at $ 99.99 USD
    Free Shipping
    Starting at $ 99.99 USD
    Free Shipping
    priced per pair

    We offer a choice of brands to satisfy our customer's stringent quality standards -
    Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
    Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 325i 325is 325ic 328i 328is
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:597185
    Part#: E36M3BLRFKT2
    Ships on Sep 30, 2026
    Sale - Save 13% $ 426.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 371.40 USD
    Free Shipping
    Sale - Save 13%
    $ 426.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 371.40 USD
    Free Shipping
    Turner Motorsport stainless steel brake lines with fluid and tools for a complete DIY
    Packaged by Turner - Corporate Logo
    T#:388017
    Part#: E36FCSLBRAKES
    Ships in 1 day
    Starting at $ 1,490.00 USD
    Free Shipping
    Starting at $ 1,490.00 USD
    Free Shipping

    E46 M3 CSL brakes fit the E36 M3 for a bolt-on size enhancement and more stopping power. The CSL rotors are a full 30mm (1.18") larger than the stock E36 M3 discs. The larger rotor puts out more braking torque and can handle more friction and heat than stock. With the special brackets these larger rotors are able to bolt-on to the E36 M3 hub using your original calipers and lines. Simply bolt them on using the new caliper bracket. The E36 M3 CSL upgrade is a moderate upgrade over stock compared to a StopTech or Brembo Big Brake Kit but has lower upfront cost, lower consumable cost (pads and rotors), and has a wide range of pad choices (any brake pad for an E36 M3 or E46 M3 will work).

    We offer these brakes with three rotor choices -

    • Stoptech (Centric) CSL/ZCP Cross-Drilled and Floating
    • Original M3 CSL/ZCP Cross-Drilled and Floating
    • ECS 2-piece Cross Drilled and Slotted Floating (pictured)

    With more braking torque, the brake bias is changed. For the street, you will notice more stopping power and more "bite" from the front brakes. You may not notice the front brakes are working harder. If you're using this kit on the track it will be more important to balance the brake bias using different front-rear pad compounds. The front brakes will be doing more work than before to slow the car down and you will need to balance that with a more aggressive pad on the rear. You may notice the front tires locking up sooner, especially in wet conditions. Contact us to discuss track pads for your situation.

    Wheel fitment: 18" wheels are strongly recommended for brake clearance although some 17" wheels will work (if they clear a BBK they will work with these)

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338944
    Part#: INSP2E36M3
    In Stock
    Starting at $ 128.98 USD
    Free Shipping
    Starting at $ 128.98 USD
    Free Shipping
    Keeping up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your E36 M3 will ensure you get many more miles from your cherished BMW.

    This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • install or clean magnetic drain plug
    • replace drain bolt crush washer
    • reset oil service/maintenance light
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire, including pressure, and tire-changing tools
    • inspect belts for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • lubricate throttle linkage
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    30,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    60,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance light
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter replacement
    • engine and A/C serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • inspect main accessory pulleys for cracks
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement

    You may also want to pick up these other helpful items:
  • replace your drain plug with a magnetic one
  • Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    1995-1999 E36 BMW M3 with manual transmission


    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:25768
    Part#: CIKE36328
    Ships in 1-2 days
    Sale - Save 3% $ 217.71

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 211.15 USD
    Free Shipping
    Sale - Save 3%
    $ 217.71

    This product was last offered at the strikethrough price on
    06-15-2026

    $ 211.15 USD
    Free Shipping
    Installing a clutch is a job you want to do right the first time. Our comprehensive kit includes all the gaskets, seals, and hardware necessary for a standard clutch replacement. Believe me it is no fun to have the car apart only to find you need some additional parts or to find out you have to drop the transmission for the second time to replace a leaking seal.

    Complete Parts List
    (click to expand)
    BMW p/nQtyDescription
    071199060456Pressure Plate Bolt
    11142249533 1Rear Main Seal
    11211720310 1Pilot Bearing
    11222243051 8flywheel bolt
    18301716888 2Exhaust Manifold to Cat Gasket
    18301737774 6Exhaust Flange Nut
    21511223328 1Clutch Pivot Pin
    21517570284 1Clutch Spring Clip
    23111224799 1Transmission Output Seal
    23121282394 1Selector Rod Seal
    23211224820 1Input Seal


    This item fits the following BMWs:
    1996-1998 E36 BMW 328i 328is 328ic
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:2843
    Part#: TMS2843
    Ships in 1-2 days
    Sale - Save 5% $ 686.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 651.70 USD
    Free Shipping
    Sale - Save 5%
    $ 686.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 651.70 USD
    Free Shipping
    1993-94 E36 325i/is Stage 1 Performance Package
    Peak Power Gain: +27hp / +25ft-lbs
    Rev limit: 7000
    Octane: 91 or higher

    Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe cold air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

    Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

    Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

    Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

    We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

    1993-94 E36 325i/is Stage 1 Performance Package includes:
    aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
    TMS Performance Chip

    Applications:
    1993-94 E36 325i, 325is, 325ic
    Show More Show Less
    Autel - Corporate Logo
    T#:3529121
    Part#: AUL1SENSORKT
    In Stock
    $ 243.99 USD
    Free Shipping
    $ 243.99 USD
    Free Shipping


    Packaged by Turner - Corporate Logo
    T#:6181670
    Part#: TWH9905020T
    In Stock
    Sale - Save 18% $ 155.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 127.99 USD
    Free Shipping
    Sale - Save 18%
    $ 155.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 127.99 USD
    Free Shipping
    20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:337962
    Part#: 11129069861
    In Stock
    Sale - Save 12% $ 255.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 225.23 USD
    Free Shipping
    Sale - Save 12%
    $ 255.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 225.23 USD
    Free Shipping
    Full set of replacement gaskets, seals, and o-rings for when you're overhauling the cylinder head from an S52 engine. This set conveniently comes with everything you should need when rebuilding the cylinder head.

    This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Complete Parts List
    (click to expand)
    BMW p/nQtyDescription
    071199631303coolant sensor o-ring,
    block coolant connector o-ring
    071199632001block coolant drain seal ring
    071199632012exhaust manifold plug gasket ring
    071199634181timing chain tensioner o-ring
    111214051061head gasket
    111217389631rear coolant flange gasket
    111290705321valve cover gaskets,
    main valve cover, spark plug holes
    113490644572valve stem seals,
    2 packs = 24 valves
    113617408401VAN0S unit profile gasket
    115312650841thermostat o-ring
    115317404371thermostat housing profile gasket
    116117161741throttle body-to-manifold o-ring gasket
    11611740692intake manifold-to-head profile gasket
    116217442522exhaust manifold-to-head gasket plate
    121417483981cam position sensor o-ring
    135317202511fuel pressure regulator o-ring
    135317202521fuel pressure regulator o-ring
    136217432991intake air temp sensor o-ring
    1364173076712fuel injector o-ring
    183017168882exhaust manifold flange gasket
    324110935962VAN0S oil line o-ring


    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1998-2000 Z3 BMW MZ3 Roadster, Coupe
    Show More Show Less