BMW Suspension Parts for BMW 3 Series E36 (1992-1998)

Unlock sharper handling and enhanced suspension geometry with this limited-time Doorbuster package. Designed for the E36 M3, this kit combines adjustable front sway bar end links, billet aluminum sway bar brackets, and polyurethane bushings to eliminate unwanted deflection, improve response, and deliver the track-ready precision your BMW deserves.

ADJUSTABLE FRONT SWAY BAR END LINKS — 215–275MM

ECS Tuning’s Adjustable Front Sway Bar End Links allow fine-tuning of your sway bar geometry for optimal balance and performance. With a generous 60mm (2.36") range of adjustability, you can precisely eliminate sway bar preload caused by lowered ride heights or coilover setups—ensuring predictable, neutral handling in all conditions.

Each link features a CNC-machined 6061-T6 billet aluminum body, anodized in red for corrosion resistance and durability. The design incorporates left- and right-hand threaded sections for quick, on-car adjustments without disassembly. Heavy-duty ball joint ends with rubber dust boots and stainless retainers provide long service life, while zinc-plated hardware ensures strength and rust resistance.

Technical Specs:

Adjustment Range: 215mm (8.46") – 275mm (10.82")

Billet aluminum, red anodized center sections

Heavy-duty M10x1.5 ball joints with weather-resistant boots

Zinc-plated hardware & Nyloc locking nuts

Left/right-hand threaded adjustment for easy tuning

Fitment Note: If your E36 M3 has aftermarket struts or coilovers, confirm the distance between your sway bar and the strut body at ride height. Proper fitment requires a length between 215–275mm.

ECS BILLET FRONT SWAY BAR BRACKETS WITH POLYURETHANE BUSHINGS — PAIR

Replace flimsy factory brackets with ECS Tuning’s Billet Front Sway Bar Mounting Kit. Engineered from CNC-machined 6061-T6 billet aluminum, these brackets dramatically reduce deflection, delivering faster reaction time and a more connected front end.

The included red polyurethane bushings feature a greaseable channel for long-lasting, quiet operation. The brackets are Type II black anodized for superior corrosion protection and paired with Class 12.9 zinc-flake coated hardware to ensure secure, worry-free installation.

Performance Benefits:

Rigid billet aluminum brackets minimize sway bar deflection

Polyurethane bushings enhance roll resistance and response

Greaseable design for quieter, longer service life

Improved steering feel and flatter cornering

Installation Notes: Installation is simple and completely reversible—just unbolt your OE brackets, install the ECS poly bushings and billet mounts with supplied hardware, and torque to spec. Fitment is intentionally snug against ECS sway bar stops; press firmly to align and fasten. Use conventional bearing grease during assembly for best results.

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance. 

We sell the basic strut and shock mount package, which includes:

• Front strut mounts (also known as guide support)
• Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
• Front strut tower paper washer gaskets
• Front and rear self-locking mounting nuts
• Rear Lifetime Warranty 'Repair Shop' shock mounts
• Rear shock mount reinforcements (to prevent cracking of shock towers)
• Rear shock mount gaskets

In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included. 

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty! 

This item fits the following BMWs:
1995 E36 BMW M3

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock, are a chromolon tubular system, and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 70 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

*This Pro kit offers reduced weight control arms that help this kit shed 2.9 lbs from the standard kit while still remaining just as strong thanks to their chromolon tubular design.*

Kit features:

• CNC Laser Cut Components
• Plug & Play - includes all needed hardware
• Increase to 70 Degree (or more) steering angle (5 degrees more than standard version)
• Includes Camber Plates
• Stiffer offset control arm bushings
• Roll Center and Bump Steer Correction Plates
• High Strength chromolon tubular control arms with steel monoball ball joints (2cm wider than standard version)
• Increased length steering tie rods with steel monoball ball joints
• DriftAllstar- & EEDC-Tested
• Total weight of all components included: 12.2kg / 26.9lbs (1.3kg / 2.9lbs lighter that standard version)

Fits the following BMWs:
1992-1999 E36 BMW All Submodels