BMW Brakes & Brake Parts for BMW 3 Series E36 (1992-1998)

135/BMW Performance brakes for your E36 and E46! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with E46 330-sized rotors (325x25mm / 12.8") for a bolt on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper bracket, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation).

Brake rotor options -

• OEM Pagid Coated - blank rotors with anti-corrosion coating
• Turner/Centric cross-drilled
• Turner/Centric slotted
• Turner/Cetnric cross-drilled & slotted
• BMW Peformance floating and cross-drilled
• ECS 2-piece floating with cross-drilled and slotted

Brake pad options -

• OEM Textar (same as stock 135i)
• Centric Posi-Quiet - nearly dust-free (Turner preferred!)
• Hawk Ceramic nearly dust-free
• Hawk HPS performance
• StopTech performance

This is a direct fit to all E36 and E46 (not E46 M3) and comes with a lot more braking power than standard (especially on non-M E36). Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. E46 Style 68 wheels shown are used with 5mm spacer.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Pagid Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW M3 S52/S50
Z3 BMW M Coupe/Roadster S52/S54

E46 M3 CSL brakes fit the E36 M3 for a bolt-on size enhancement and more stopping power. The CSL rotors are a full 30mm (1.18") larger than the stock E36 M3 discs. The larger rotor puts out more braking torque and can handle more friction and heat than stock. With the special brackets these larger rotors are able to bolt-on to the E36 M3 hub using your original calipers and lines. Simply bolt them on using the new caliper bracket. The E36 M3 CSL upgrade is a moderate upgrade over stock compared to a StopTech or Brembo Big Brake Kit but has lower upfront cost, lower consumable cost (pads and rotors), and has a wide range of pad choices (any brake pad for an E36 M3 or E46 M3 will work).

We offer these brakes with three rotor choices -

• Stoptech (Centric) CSL/ZCP Cross-Drilled and Floating
• Original M3 CSL/ZCP Cross-Drilled and Floating
• ECS 2-piece Cross Drilled and Slotted Floating (pictured)

With more braking torque, the brake bias is changed. For the street, you will notice more stopping power and more "bite" from the front brakes. You may not notice the front brakes are working harder. If you're using this kit on the track it will be more important to balance the brake bias using different front-rear pad compounds. The front brakes will be doing more work than before to slow the car down and you will need to balance that with a more aggressive pad on the rear. You may notice the front tires locking up sooner, especially in wet conditions. Contact us to discuss track pads for your situation.

Wheel fitment: 18" wheels are strongly recommended for brake clearance although some 17" wheels will work (if they clear a BBK they will work with these)

Whether you are looking to replace your E36 3 Series's worn out stock components or simply upgrade your existing braking system for a more aggressive and responsive feel, this kit has been hand pick by us to suite your needs. Featuring Cool Carbon S/T performance brake pads for increased bite and better heat resistance, these pads offer significantly improved braking power and less dust, compared to the stock brake pads, without compromising the ABS system and without the harshness typically associated with performance style pads.

Kit Components:

• Front and Rear Premium Zimmermann Coated Rotors
• Front and Rear Brake Rotor Set Screws
• TYP 200 Brake Fluid - 1 Liter
• Front and Rear Cool Carbon S/T Performance Brake Pads
• Front and Rear Brake Sensors
• ATE Plastilube Anti-Squeal Compound

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time. 

This kit fits the following BMWs:
1994-1999 E36 BMW 325i/is 323i/is 328i/is

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/ic/is/ti 323is/ic 325i/is/ic 328i/is/ic

URO Brake Master Cylinder Hose - BMW

The URO Brake Master Cylinder Hose - BMW is engineered for optimal fitment and performance in your BMW’s brake system. The brake master cylinder reservoir hose plays a crucial role in ensuring proper fluid flow, and URO Parts' precise manufacturing ensures a secure and reliable connection. This hose is designed to withstand the demanding conditions of your brake system, ensuring longevity and safety.

• Manufactured to OE dimensions for precise fitment and secure sealing
• High-quality hose material resistant to glycol-based brake fluid corrosion
• Ensures long-term reliability and performance under high-pressure conditions
• Perfect for restoring the integrity of your brake system when replacing worn-out hoses
• Easy to install, providing a hassle-free replacement experience