BMW Brakes & Brake Parts for BMW 3 Series E36 (1992-1998)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Pagid Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW M3 S52/S50
Z3 BMW M Coupe/Roadster S52/S54

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/is/ic 323is 325i/is/ic 328i/is

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

1999-2002 Z3 BMW

1995-1999 E36 BMW M3

1984-1995 E34 BMW 525i 530i 535i 540i M5

1988-1991 E30 BMW M3

1988-1994 E32 BMW 740i/iL 750iL

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

1992-1998 E36 BMW 318i/Ti 325i/is 328i/is

2000 E46 BMW 328Ci

1996-1997 Z3 BMW

Front Drilled & Slotted Brake Rotors V5 - Set (315x28) are precision manufactured by Turner Motorsport to ensure consistent stopping power during high-performance driving. These 5th generation rotors are specifically designed for BMW vehicles and feature advanced technology for optimal braking performance. The rotors are coated with a matte black zinc finish, offering excellent corrosion protection and a sleek appearance.

The V5 design incorporates cross-drilled and slotted features, enhancing heat dissipation and wet-weather performance compared to traditional slotted rotors. This makes them an ideal choice for high-performance driving enthusiasts. The black zinc coating not only provides a modern look but also offers superior protection against corrosion.

• Enhanced Heat Dissipation: Cross-drilled and slotted design improves cooling, reducing brake fade.
• Improved Wet-Weather Performance: Better braking response in wet conditions for increased safety.
• Matte Black Zinc Coating: Provides a contemporary look and protects against corrosion.
• High-Quality Construction: Made from premium materials to withstand high-performance demands.
• Precision Machining: Ensures optimal rotor balance, reduces vibration, and delivers a smooth braking experience.