BMW Brakes & Brake Parts for BMW 3 Series E36 (1992-1998)

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Genuine BMW Brakes Ventilation Valve is essential for maintaining optimal brake performance and safety in your BMW. This high-quality ventilation valve is designed specifically for BMW models, ensuring a perfect fit and superior functionality.

The Genuine BMW Brakes Ventilation Valve plays a crucial role in the brake system by preventing moisture and contaminants from entering, thereby extending the life of your brake components and ensuring consistent braking performance. Engineered to BMW's exact specifications, this valve provides reliability and peace of mind for BMW owners.

• Ensures optimal brake performance and safety
• Prevents moisture and contaminants from entering the brake system
• Extends the life of brake components
• Designed specifically for BMW models
• Guarantees a perfect fit and easy installation
• Engineered to BMW's exact specifications for superior functionality

Investing in a Genuine BMW Brakes Ventilation Valve ensures your vehicle receives the best quality parts, enhancing its performance and longevity. Trust genuine BMW parts to keep your BMW running at its best.

Genuine BMW Ventilation Valve
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E53 48IS,E36,E39,E46,E53 X5,E63,E65,E82,E83 X3,E85 Z4,E86 Z4,E90,E92,E93

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

1995-1999 E36 BMW 318Ti 318i

2000-2005 E46 BMW 323i 325i/ci/xi

2003-2008 Z4 BMW

BMW 135i Brembo Caliper Brackets (E36/46 Non-M) - For E46 M3 CSL Rotors are precision-engineered brackets designed to enable the use of E46 M3 CSL rotors with Brembo calipers on non-M E36 and E46 BMW models. These brackets are essential for upgrading your braking system to achieve enhanced performance and improved stopping power.

• Enhanced Braking Performance: Allows the use of high-performance E46 M3 CSL rotors with Brembo calipers.
• Precision Engineering: Designed specifically for BMW E36 and E46 non-M models.
• Improved Stopping Power: Upgrades your braking system for better heat dissipation and reduced fade.
• High-Quality Construction: Ensures durability and reliability under demanding conditions.
• Direct Fitment: Easy installation with no need for additional modifications.

Upgrade your BMW's braking system with these caliper brackets to experience superior performance and enhanced safety on the road.