BMW Drivetrain Parts for BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:
E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel
E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel
JB Racing - Corporate Logo
T#:3771
Part#: 520-010-240
Ships on Jul 28, 2025
$ 602.00 USD
Free Shipping
Add to Wish List
$ 602.00 USD
Free Shipping
Add to Wish List
As Used on Project E36 M3
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less
E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel
E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Ships in 5 Business Days
11% off MSRP $ 765.00
$ 679.00 USD
Free Shipping
Add to Wish List
11% off MSRP $ 765.00
$ 679.00 USD
Free Shipping
Add to Wish List
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less
E36, E46 JB Racing Ultra-Light Racing Clutch/Flywheel Assembly
E36, E46 JB Racing Ultra-Light Racing Clutch/Flywheel Assembly ...
JB Racing - Corporate Logo
T#:340509
Part#: WCCLUTCH
Ships in 5 Business Days
Starting at $ 1,999.00 USD
Free Shipping
Add to Wish List
Starting at $ 1,999.00 USD
Free Shipping
Add to Wish List
The ultimate in a racing flywheel and clutch! This was developed for use in our E36 and E46 World Challenge Touring Cars. The combined weight of the clutch and flywheel is only 11lbs!!!

This multi-disc (2 or 3 disc setups) offer a minimal flywheel mass (enough to include a factory ring gear for the starter) and a small 5.5" clutch assembly rated to 500hp. By saving as much weight as possible less energy is used in simply spinning the flywheel/clutch assembly and that means a lot more power and torque is available at the drive wheels. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines and this is among the most advanced and lightest racing clutch kits available for your BMW race car.

The JB Ultra-Light Performance racing clutch is available in 2-disc or 3-disc setups. We used the 5.5"/140mm size in our Touring Cars but larger sizes are available too. This is a turn-key racing clutch and flywheel kit that you don't have to engineer or spec yourself. This is the same clutch setup we used when winning the 2003 and 2004 Touring Car Championships - the quality and performance is unquestionable. That series also employed standing starts at each race and this clutch setup performed flawlessly with nearly a full season of racing on them before needing a change.

JB Ultra-Light flywheels include:
  • precision CNC machined aluminum flywheel
  • zero-balanced up to 10,000 RPM
  • replaceable hardened steel clutch friction surface
  • Helicoil threaded inserts
  • high-strength grade 10.9 hardware
  • multi-disc racing clutch with Performance racing pressure plate
  • JB Racing throw-out bearing with custom bobbin
    This is a true racing clutch and will not function as a street-able clutch at all. It behaves as an on/off switch with no slippage allowed. Extreme care must be used when driving on to trailers and around the paddock. But when driven correctly the life span of this clutch is amazing - we could get a full season of racing a 300hp M54 from this clutch setup including standing starts at every race! Replacement clutch components and flywheel rebuilding are available.

    A properly adjusted clutch stop is required for use with this clutch kit.

    Stock Flywheel + Clutch Weight = 45+lbs
    JB Ultra-Light Flywheel & Clutch Weight = 11lbs

    This item fits the following BMWs:
    1992-1999 E36 BMW 325i 325is 328i 328is M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i (5-speed)
    • Show More Show Less
    BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel
    BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel ...
    JB Racing - Corporate Logo
    T#:3774
    Part#: 520-030-240
    Ships Jul 18, 2025
    $ 714.00 USD
    Free Shipping
    Add to Wish List
    $ 714.00 USD
    Free Shipping
    Add to Wish List

    BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.

    The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.

    This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.

    While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.

    • Faster acceleration: Reduces the rotational mass for quicker engine response.
    • Improved throttle response: Engine revs more freely and builds RPM faster.
    • Enhanced performance: More power delivered to the wheels for better driving dynamics.
    • Cost-effective maintenance: Compatible with factory BMW organic clutches and can be resurfaced.
    • Direct replacement: Easy upgrade with no modifications required.

    Vehicle Compatibility:

    • 1996-1999 E36 BMW 328i, 328is, 328ic
    • 1997-1998 Z3 BMW Z3 2.8
    Show More Show Less

    Select Vehicle

    BMW Mini
    Clear Vehicle

    Category

    Brand

    Price

    $
    $