BMW Drivetrain Parts for BMW 3 Series E36 (1992-1998)

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

• Reduced mass equals increased acceleration
• CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
• CM uses an OE steel ring gear secured by bolts
• CM offers a limited lifetime warranty
• CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

Complete your Getrag 420G six-speed manual swap with a comprehensive shifter solution engineered for precision and durability. This all-in-one kit features our double-adjustable short shifter, dual-shear selector rod, heavy-duty shifter arm, upgraded bushings, and all required installation hardware for crisp gear engagement, reduced shifter slop, and confidence-inspiring performance you'll feel with every shift!

TURNER MOTORSPORT DOUBLE ADJUSTABLE SHORT SHIFT KIT

BMWs have historically been plagued by very long throw shifters from the factory - luckily, we've developed the solution. Our short shifter system is height- and throw-adjustable, offering up to a 52% reduction in throw over stock. Double adjustability enables you to find the sweet spot that will make you excited to drive your car again. Installation of this kit is also of the easiest to tackle. Compared to the competition, a custom bearing cup allows for easy installation from inside the car (on applications that use the stock shifter arm).

Benefits:

Adjustable between a conservative short throw to ultra short throw Ultra crisp shifter feel - quicker, more precise shifts More engaging driving experience Adjustability:

Independently adjustable knob height 22mm adjustment range to fine-tune shifter throw and feel. Note: knob height also affects throw reduction to some degree Independently adjustable shifter throw Adjustable by raising and lowering the lower lever position relative to the pivot ball. Note: ball position also affects knob height by ~10mm range Combined total throw adjustment range ​32 to 52 % reduction in throw over stock E36 shifter. A throw adjustment can be done in the car without removing the shifter DSSR (109MM) - E36 420G

Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our DSSR is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.

Features:

Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) HEAVY-DUTY SHIFTER ARM - E36 420G

To cater to the six-speed swap E36 community, we designed a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, this replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and Turner Motorsport Double-Adjustable Short Throw Shifter Kit.

Features:

6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components POLYURETHANE SHIFTER ARM BUSHING

This shifter bushing is designed to remove the shifter play caused by an old, failed rubber shifter bushing. Manufacturing the bushing from polyurethane instead of rubber reduces the amount of stretch caused by the moving part through the bushing. This maintains the direct crisp feel from your shifter assembly. When your OE shifter arm bushing begins to fail, you will notice slop in shifting, potentially making it easier to miss gears, and it often causes an obvious vibration and movement from the engine RPMs.

Features:

Corrosion-resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane Stiffer bushing results in a crisper shifter feel and a more engaging driving experience. Ready to install out of the box - no modifications required Replaces Genuine BMW part numbers 25111222015 and 25111222652 Improved durability over OEM rubber Made in America Check out the "KIT CONTENTS" tab for a detailed list of everything included in this kit!

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

78mm Diameter with fitment for M10 nuts/bolts.

Fits the following BMWs:
1977-1983  E21  - 320i 
1983-5/1986  E28  - 528e - Manual Transmission 
5/1986-1988  E28  - 528e - Manual or Automatic Transmission 
1984-1991  E30  - 318i, 318is, & 318ic 
1984-1986  E30  - 325e/es (thru 04/1986) 
1986-1991  E30  - 325i, 325is, 325ic 
1987-1991  E30  - 325ix 
1992-1997  E36  - 318i 318is 318ic - For Automatic Transmission only 
1996-1998  Z3  - Z3 1.9 liter roadster

Turner Motorsport Chassis Mount Short Throw Shifter

Upgrade your BMW's shifting experience with the Turner Motorsport Chassis Mount Short Throw Shifter—the ultimate solution for precision, control, and race-inspired performance. Designed to eliminate excessive play, reduce shift throw, and enhance driver engagement, this shifter transforms your driving experience with a solid, direct feel that brings excitement to every shift.

Why Upgrade?

BMW's factory shifter assemblies are known for their vague and imprecise feel due to excessive play, soft bushings, and long throw distances. Traditional short shifters reduce shift length but often retain the factory shift carrier, which still allows flex and movement. The Turner Motorsport Performance Chassis Mount Short Shifter takes performance to the next level by completely removing the shift carrier, eliminating all bushing flex and driveline movement for unparalleled precision.

Unlike standard setups, this shifter features an elevated base that moves the fulcrum point higher, resulting in dramatically shorter throws and crisp, accurate shifts. The tall "rally-style" shift lever enhances leverage and positions the shifter closer to the steering wheel for faster gear changes. Additionally, an adjustable centering spring lets you fine-tune self-centering force for the perfect balance of resistance and smoothness.

Features & Benefits

Ultra-Short Throw – Optimized geometry and a raised fulcrum point drastically reduce shift travel for lightning-fast gear changes. Maximum Precision – Chassis-mounted design eliminates bushing flex and floating movement for a direct, race-inspired feel. Solid Shifter Engagement – Eliminates side-to-side play and imprecise gear selection for ultimate driver confidence. Adjustable Centering Spring – Customize the self-centering force to suit your driving style and preference. Premium Materials & Finish – Constructed from 6061 aluminum, 4130 steel, and 316 stainless steel with a durable black anodized finish for strength and longevity. Universal Fitment – Compatible with multiple BMW chassis using the included base plate and hardware (see "Fits These Cars" for exact applications). Race-Inspired Engineering

Designed for enthusiasts who demand the best, the Turner Motorsport Chassis Mount Short Shifter provides unmatched shift feel and precision. The spherical bearing pivot with a maintenance-free brass insert ensures durability and smooth operation, while the rugged CNC-machined construction withstands aggressive shifting and track abuse.

Take full control of your BMW’s shifting performance with Turner Motorsport’s ultimate short shifter upgrade—built for the road, perfected for the track.

URO Front Inner Left/Right BMW Wheel Hub Dust Cap

The URO Front Inner Left/Right BMW Wheel Hub Dust Cap is a high-quality replacement designed to protect your BMW’s wheel bearings from dirt, moisture, and debris. This direct-fit OE replacement ensures a secure and proper seal, preventing premature wear and extending the lifespan of the wheel hub assembly. Manufactured from durable, heat-resistant materials, this dust cap withstands high temperatures and road vibrations for long-term reliability. Designed for easy installation, it restores proper bearing protection and helps maintain optimal wheel performance.

Key Benefits:

• Direct-fit OE replacement for seamless installation and a perfect seal
• Protects wheel bearings from dirt, moisture, and debris to prevent premature wear
• Durable construction resists heat and road vibrations for long-lasting performance
• Restores proper bearing protection for improved reliability and efficiency
• Precision-engineered to meet BMW specifications for an exact fit

Ensure your BMW’s wheel bearings stay properly protected with the URO Front Inner Left/Right BMW Wheel Hub Dust Cap for enhanced performance and longevity.