VANOS Oil Line and Seals - E36 325i/M3 93-95, E34 525i 93-95 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639472

Part#: 11361703464

Ships in 2 Business Days

$ 28.35 USD

Add to Wish List

Qty

$ 28.35 USD

Add to Wish List

This oil pipe hose runs from the VANOS adjusting unit to the oil filter housing. At some point the rubber line shrinks or cracks and oil can weep out of the swage fittings. The fittings at the banjo bolts can also leak so replacing the seals for each banjo fitting is strongly recommended. This item fits the following BMWs: 1993-1995 E36 BMW 325i 325is 325ic M3 3.0 1993-1995 E34 BMW 525i

Show More Show Less

Cometic "MLS" Multi Layer Steel Head Gasket - S50 3.0L, S52 3.2L ...

T#:374022

Part#: C4329-070

In Stock at Vendor

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Discover the Cometic MLS Multi-Layer Steel Gasket

Experience excellence with one of the market's premier multi-layer-steel (MLS) gaskets. This gasket is engineered for long-lasting performance, making it a top choice for high-performance and stock replacement applications. With a thickness of .070" and an 87mm cylinder bore, it offers outstanding durability. What sets Cometic MLS gaskets apart is their ability to be installed dry, thanks to the sealant that forms a bond with dry surfaces.

MLS, which stands for Multi-Layer Steel, is comprised of three layers of stainless steel. The outer layers feature an embossed Viton-coated stainless steel that not only provides an exceptional seal but also exhibits excellent rebound characteristics and resistance to corrosion. These MLS head gaskets effectively reduce bore distortion and can withstand extreme cylinder pressures.

Show More Show Less

Camshaft Position Sensor

T#:598679

Part#: 12141740959

In Stock at Vendor

$ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

In Stock at Vendor

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

URO Camshaft Position Sensor - BMW E36 Z3 M42 M44

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591864

Part#: 12141743072

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

URO Camshaft Position Sensor - BMW E36 Z3 M42 M44

The URO Camshaft Position Sensor - BMW E36 Z3 M42 M44 is an essential component for precise engine timing and efficient performance. Also known as the pulse generator, this sensor mounts to the side of the cylinder head and detects the camshaft’s position to optimize fuel injection and ignition timing. A failing sensor can trigger engine fault codes, cause rough idling, misfires, or poor fuel economy. Replacing a faulty camshaft position sensor restores accurate timing, ensuring smooth operation and peak efficiency for your BMW E36, Z3, M42, or M44 engine.

Direct replacement for BMW E36, Z3, M42, and M44 engines
Detects camshaft position for precise engine timing
Helps optimize fuel injection and ignition performance
Eliminates rough idling, misfires, and poor fuel economy
Designed for durability and long-lasting performance
Restores smooth operation and prevents engine fault codes
OE-style fitment for easy installation

Show More Show Less

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

Valve Cover Gasket Set - E36 E39 Z3 with M52

T#:337951

Part#: 11120034108

In Stock

Starting at $ 70.25 USD

Add to Wish List

Starting at $ 70.25 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

Genuine BMW lower timing chain guide rail - E36 318i 318is 318ti 318i...

T#:22256

Part#: 11311739130

Ships in 1-2 days

6% off MSRP $ 30.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

6% off MSRP

$ 30.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Genuine BMW Deflection Rail -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M42,M44

Genuine BMW Oil Filter Kit - E36 325, E34 525i M50 2.5L

T#:360647

Part#: 11421730389

Ships in 3 Business Days

9% off MSRP $ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

9% off MSRP

$ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Genuine BMW Adapter Lead

T#:14857

Part#: 12514592703

Ships in 3 Business Days

3% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.99 USD

Add to Wish List

Qty

3% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.99 USD

Add to Wish List

Genuine BMW Adapter Lead -
This item fits the following BMW Chassis:
E36,E39,E46

Fits BMW Engines including:
M52,S52

Oil Filter Housing Cap

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:12151731

Part#: 11421744000

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Over time has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the nut cast into the top of the cap, making removal harder each time. This oil filter housing fits cars with the M52, M54, or M56 engines. If you are looking for a more durable, easier-to-remove replacement, Turner Motorsport trusts ECS Tuning's Billet Aluminum Oil Filter Housing Caps

Show More Show Less

Genuine BMW Water Pump Pulley

T#:360660

Part#: 11511730554

Ships in 1-2 days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Genuine BMW Fuel Tank Breather Valve

T#:7334

Part#: 13901744150

Ships in 1-2 days

2% off MSRP $ 196.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 192.99 USD

Add to Wish List

Qty

2% off MSRP

$ 196.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 192.99 USD

Add to Wish List

Genuine BMW Fuel Tank Breather Valve -
This item fits the following BMW Chassis:
E36,E38,E39

Fits BMW Engines including:
M44,M52,M62,M73,S52

Show More Show Less

Genuine BMW Alternator Air Duct - Upper - E36 325i 325is 328i 328is M...

T#:7136

Part#: 12311730635

Ships in 3 Business Days

3% off MSRP $ 121.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD

Add to Wish List

Qty

3% off MSRP

$ 121.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 117.99 USD

Add to Wish List

Genuine BMW Intake Manifold
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M50,M52,S50,S52

Genuine BMW Crankshaft Socket Tool - S50 3.0L, S54 3.2L, B48/46 B58 ...

T#:170499

Part#: 83300491056

Ships in 6 Business Days

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Working on your S50/S54 or B series timing system? Then you need this adapter that will allow you to turn the engine over at the crankshaft with a socket wrench. BMW tool number: 11 5 100

Genuine BMW Lower Timing Chain Sprocket

T#:32467

Part#: 11211719984

Ships in 3 Business Days

3% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

3% off MSRP

$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Genuine BMW Timing Chain - M42 M44

T#:174283

Part#: 11311739480

Ships in 1-2 days

1% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD

Add to Wish List

Qty

1% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD

Add to Wish List

Genuine BMW Timing Chain -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M42,M44

Genuine BMW Engine Oil Dipstick - E36 Z3 M44 1.9L

T#:35481

Part#: 11431247531

Ships in 1-2 days

6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Qty

6% off MSRP

$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Genuine BMW Dipstick -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M42,M44

Valve Cover Gasket Replacement Kit - M50 S50

For vehicles with production date from 09/1992

T#:641570

Part#: 11120034107KT

In Stock

$ 191.99

This product was last offered at the strikethrough price on
07-06-2026

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

A complete kit for replacing your leaky valve cover gasket. Kit includes: Valve cover gasket set Oil filler cap gasket Valve cover grommets and washers

VANOS Solenoid Switch - E34 525i 93-95, E36 325i/M3 93-95

T#:22275

Part#: 11361738494

Ships in 1-2 days

$ 407.99 USD

Add to Wish List

Qty

$ 407.99 USD

Add to Wish List

This is the solenoid switch that activates the VAN0S system on 1993-1995 325i, 525i, and US M3 models (single VAN0S, OBD-I). Without this switch activating (and de-activating) the VAN0S you will experience poor performance and torque output, worse fuel economy, fault codes for VAN0S operation and misfires. Thankfully, this part is relatively easy to replace and they generally last a long time. This is the Genuine BMW solenoid, not an overseas knockoff, so the quality is first-rate. This is the solenoid used on M50 and S50US engines (pre-OBD-II).

If you are looking to install the VANOS solenoid, you should also order the o-ring from the options below. Also check for leaks from the VAN0S oil line and seals. Now is a good time to access and replace it if it's leaking.

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic M3
1993-1995 E34 BMW 525i

Show More Show Less

Genuine BMW Sprocket - 11211401036 - E46,E85,E46 M3,E85 Z4M

T#:32395

Part#: 11211401036

Ships in 1-2 days

3% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

3% off MSRP

$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

OEM INA A/C Tensioner Pulley -- E36 M44 M42, Z3 S52 M52

We Price Match - Give Us A Call or Chat!

T#:361134

Part#: 11282245087

Ships in 1-2 days

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

This is an OEM INA A/C tensioner for the serpentine belt on your BMW. This tensioner keeps the belt for the Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Achilles Motorsports Performance Coated Rod Bearing Set - BMW M50 M52...

T#:1438265

Part#: 11-AM-RCRB-M50

Ships in 3 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Achilles Motorsports uses an extremely hi-tech Dry Film Lubricating process that will keep friction to a minimum allowing your engine to rev faster without worry while keeping oil temperature lower. Perfect for high-performance street, sprint, or endurance racing engines, this specialized coating protects vital engine bearings on dry engine starts and during extreme temperatures and high RPM operation. This specialized coating is the same process that is the choice of professional engine builders around the world, used on all NASCAR, ALMS, and Grand-Am engines. Achilles' bearings provide increased insurance against mechanical thermal breakdown compared to the OEM type bearing, showing much less wear during routine inspections. Note For high-performance and racing engines, we strongly recommend upgrading the OEM type connecting rod bolts to an ARP Connecting Rod Bolt Set to keep your bearing and caps tight even under the most extreme conditions, eliminating potential walk and bearing problems. As with all racing and performance bearings, professional installation is required. Please check all clearances as per the manufactures specifications.

Show More Show Less

K&P Engineering High Performance Stainless Steel Micronic Oil Filter ...

T#:402540

Part#: S21

Ships in 6 Business Days

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

Consistent filtering across entire filter surface
Superior ASTMF316 filtration performance
7 times the flow of comparable paper oil filters
Magnetic Prefiltering
Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
No more cutting apart messy paper filters for trapped debris inspection
Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft.

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

This product fits the following BMWs:
1995 - 1999 E36 M3
2001 - 2006 E46 M3
1998 - 2002 E36/8 Z3 M Coupe
1998 - 2002 E36/7 Z3 M Roadster
2006 - 2008 E86 Z4 M Coupe
2006 - 2008 E85 Z4 M Roadster

Show More Show Less

Bav Auto Crankshaft Pulley Holding Tool

For Dual-VANOS "TU" Engines Only

T#:580404

Part#: B8800094

In Stock

Sale - Save 10% $ 180.99

This product was last offered at the strikethrough price on
05-03-2026

$ 162.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 180.99

This product was last offered at the strikethrough price on
05-03-2026

$ 162.89 USD

Add to Wish List

Bav Auto's Crankshaft Pulley Holding Tool enables you to remove your crankshaft nut/bolt with ease - we recommend this tool if you intend on replacing timing chains, oil pump chains, leaking crankshaft seals, etc.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

GENIUS 6 Volt / 12 Volt 5A Battery Charger - NOCO

T#:641140

Part#: GENIUS5

Ships in 8 Business Days

22% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

Qty

22% off MSRP

$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

The GENIUS5 is an exceptional addition to our lineup boasting incredible power, top-notch performance, energy efficiency, and a compact design. The GENIUS5 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a 5-amp rating. It's engineered for use with lead-acid batteries in automotive, marine, and deep-cycle applications, covering flooded, gel, AGM, maintenance-free variants, and even lithium-ion batteries.

Features:

Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Rein VANOS Oil Feed Line - E36, E39, E46, E53, E60, E83, Z3, Z4 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:4471

Part#: 11361705532

Ships on Aug 19, 2026

$ 61.99

This product was last offered at the strikethrough price on
06-04-2026

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

This oil pipe hose runs from the VAN0S adjusting unit to the oil filter housing. At some point the rubber line shrinks or cracks and oil can weep out of the swedge fittings. The fittings at the banjo bolts can also leak so replacing the seals for each banjo fitting is strongly recommended.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3 3.2
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Genuine BMW Fuel Line Kit

For vehicles with a production date up to 01/1995

T#:43968

Part#: 16111181361

Ships in 3 Business Days

3% off MSRP $ 379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 369.99 USD

Add to Wish List

Qty

3% off MSRP

$ 379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 369.99 USD

Add to Wish List

Genuine BMW Mounting Parts Kit Fuel Tank
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M50,S50

Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db

T#:31158805

Part#: 85115

Ships on Sep 17, 2026

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db

The Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db is designed to make sure your presence is known with powerful, attention-grabbing sound. These high-performance sports horns feature:

Impressive Loudness: Delivers a powerful 112 decibels, ensuring you’re heard in any situation.
Dual Frequency: Includes 330Hz and 400Hz horns for a dynamic and distinct sound.
Lightweight & Durable: Constructed for easy installation with weather-resistant covers, built to withstand the elements.
Easy Installation: Quick and straightforward to install, enhancing vehicle safety with minimal effort.

The kit is a must-have for anyone looking to enhance their vehicle’s horn performance and visibility on the road.

Show More Show Less

Bav Auto Vent Hose - From Valve Cover to Oil Separator - E36 E39 Z3 ...

For model year 1998-1999 only For model year 1996-1999 only

T#:579869

Part#: 54546

Ships in 6 Business Days

Sale - Save 20% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

Performance Oil Separator Kit - M52/S52

T#:51356040

Part#: 059015LA02KT2KT

Ships in 10 Business Days

Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less

OEM Febi Idler Pulley - Multiple BMWs

We Price Match - Give Us A Call or Chat!

T#:382342

Part#: 11287841228

In Stock

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

This is an OEM Febi Upper Idler Pulley, also known as the roller pulley or deflection pulley. The upper and lower idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

Show More Show Less

Genuine BMW Earth Strap For Engine Hood - 65311730952

T#:22078

Part#: 65311730952

In Stock

2% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Add to Wish List

Qty

2% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Add to Wish List

Genuine BMW Earth Strap For Engine Hood
This item fits the following BMW Chassis:
E36 M3,E63 M6,E36,E38,E63,E65

Supertech Black Nitrided Intake Valve - +1mm Oversize - Set Of 12 - B...

T#:8549425

Part#: BMIVN-1031S-12

In Stock

$ 384.99

This product was last offered at the strikethrough price on
06-03-2026

$ 347.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 384.99

This product was last offered at the strikethrough price on
06-03-2026

$ 347.99 USD

Limited Qty Sale

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our intake valves are made exclusively from an enhanced versions of EV8 (21-4N) steel. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 33mm Material: Stainless Steel 21-4N Groove Type: Triple Groove Length: 123.7mm Stem Diam: 6.95mm

Show More Show Less

Genuine BMW Camshaft Bearing Bridge - Exhaust

T#:12881

Part#: 11121436224

In Stock

6% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Qty

6% off MSRP

$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Genuine BMW Bearing Ledge Exhaust
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

Genuine BMW O-ring 11311318659

T#:20636

Part#: 11311318659

In Stock

$ 24.43 USD

Add to Wish List

Qty

$ 24.43 USD

Add to Wish List

Genuine BMW O-RING 11311318659. When doing any sort of repair or maintenance there is no replacement for genuine factory parts.
Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Genuine BMW Fuel Hose - 1 Meter

T#:41534

Part#: 13311272750

In Stock

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Bavarian Autosport M52/M54/S52 Exact-Fit Rubber Vanos Line

T#:1105923

Part#: 000932LA01-02

In Stock

Sale - Save 5% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.69 USD

Add to Wish List

Qty

Sale - Save 5%

$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.69 USD

Add to Wish List

We have seen so many M52/M54/S52 Vanos line failures at the track that we have to offer you a solution. The factory line is prone to failure due to the OEM hard-line - this rubber line alleviates the issues imposed by the factory design and enables you to worry less about your Vanos system. We trust ECS Tuning's Exact-Fit Stainless Steel lines for several different applications, and their M52/M54/S52 Vanos line is no exception. Bavarian Autosport's M52/M54/S52 Exact-Fit Rubber Vanos Line offers several benefits over OEM. Not is it they more durable and reliable OEM, but it is also easier to install, and significantly less expensive than the factory BMW Vanos line (11361705532) or other alternatives available on the market. If you're factory Vanos line hasn't failed yet, we still recommend replacing yours with Bavarian Autorsport's Exact Fit Rubber Vanos Line M52/M54/S52 to avoid eminent future failure.

Show More Show Less

Genuine BMW Air Hose - Z3 1.9 M44 1.9L E36 M44 1.9L

T#:41698

Part#: 13411247782

In Stock

3% off MSRP $ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Add to Wish List

Qty

3% off MSRP

$ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Add to Wish List

Genuine BMW Air Hose - Nbr
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44

WPC Treated Crank Bearing Set

T#:585720

Part#: 11211706847WPCKT

In Stock

Sale - Save 3% $ 250.99

This product was last offered at the strikethrough price on
06-14-2026

$ 243.46 USD

Add to Wish List

Qty

Sale - Save 3%

$ 250.99

This product was last offered at the strikethrough price on
06-14-2026

$ 243.46 USD

Add to Wish List

What's better than using new crank bearings in your next engine build? WPC-treated bearings! What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or crank service!

Show More Show Less

Schwaben & Bav Auto Water Pump And Fan Clutch Tool Kit

T#:375872

Part#: 001170SCH01AKT

In Stock

Sale - Save 25% $ 65.99

This product was last offered at the strikethrough price on
05-02-2026

$ 49.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 65.99

This product was last offered at the strikethrough price on
05-02-2026

$ 49.49 USD

Add to Wish List

Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.

Show More Show Less

Febi Engine Mount - E36, Z3

We Price Match - Give Us A Call or Chat!

T#:381807

Part#: 11811141377

In Stock at Vendor

$ 47.99

This product was last offered at the strikethrough price on
05-02-2026

$ 46.41 USD

Add to Wish List

Qty

$ 46.41 USD

Add to Wish List

Rubber engine mount

Boost Plus UltraSafe Lithium 1000A Jump Starter - NOCO

T#:641108

Part#: GB40

In Stock

20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

20% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.

Features:

Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

1/2-inch Drive 18mm VANOS Flush-Cut Socket

T#:394202

Part#: 012016ECS03A

In Stock

Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD

Add to Wish List

Qty

Sale - Save 16%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD

Add to Wish List

High-Performance Ignition Service Kit - BMW M54 M52 M52TU

T#:25739342

Part#: 7599219TMS1KT

In Stock

Sale - Save 11% $ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD

Add to Wish List

Qty

Sale - Save 11%

$ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM Bosch Platinum+4 spark plugs, and AGS dielectric grease. The new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Bosch Platinum+4 Replacement Spark Plugs Premium AGS Dielectric Grease Included

Show More Show Less

Genuine BMW Fuel Injector

T#:13141

Part#: 13641703819

Ships in 1-2 days

Sale - Save 8% $ 285.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.12 USD

Add to Wish List

Qty

Sale - Save 8%

$ 285.99

This product was last offered at the strikethrough price on
05-14-2026

$ 263.12 USD

Add to Wish List

E36 328/M3 STOCK 21.5LB INJECTOR (PINK TOP)
Fits BMW Engines including:
M52,S52

Sold individually

Genuine BMW Socket repair kit

T#:207094

Part#: 61132359996

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Genuine BMW Rep. Kit For Socket Housing - 4 Pol.
This item fits the following BMW Chassis:
E46 M3,E46,E85 Z4,E90,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Cat Cams Sport Camshaft set 269/269 10.00mm - E30 318i E36 318i ...

T#:578594

Part#: 1301413

In Stock

$ 1,051.99 USD

Add to Wish List

Qty

$ 1,051.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

OEM Mann Oil Filter Kits - Pack Of 10 - S50 S52 S54

T#:369693

Part#: 11427833769MN-10

In Stock

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E36 (1992-1998)

Sub-Categories

Discover the Cometic MLS Multi-Layer Steel Gasket

URO Camshaft Position Sensor - BMW E36 Z3 M42 M44

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results