Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers rev’d up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
?Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our Axle Back exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Durable 304SS
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section

Enhance power and driving excitement in your BMW 318ti or Z3's 4 or 6-cylinder engine with the proven performer from Supersprint – a free-flowing muffler that serves as an excellent foundation for vehicle modification.

• Unleashes the engine's distinctive sound
• Compatible with 318ti or Z3's 4 or 6-cylinder engines
• Connects to stock or aftermarket center section
• Includes all hangers and hardware for easy installation
• 36-month unlimited mileage warranty for peace of mind
• Supersprint's 60+ years of expertise in BMW exhausts
• Extensive testing with real race teams for optimal feedback
• Dyno testing, high-quality materials, and race team feedback ensure performance
• Offers a perfect balance of quality, performance, and a stellar reputation

• Aggressive, Throaty Sound
• No Highway Drone!
• Cat-Back Rear Muffler
• Made in the USA
• Lifetime Warranty

Scorpion Exhaust - BMW E36 325/328 1991 To 1998 Cat-back System DTM Tail is an ideal performance upgrade for BMW enthusiasts looking to enhance their E36’s power, sound, and aesthetics. Designed for the BMW E36 325 and 328 models from 1991 to 1998, this cat-back system with DTM-style tailpipes not only improves performance but also adds a race-inspired look and a deep, aggressive exhaust note.

Crafted from premium stainless steel, this exhaust system ensures long-lasting durability and resistance to corrosion. Engineered to fit perfectly with OEM mounting points, it offers a straightforward, modification-free installation process. The DTM tail design stands out with a bold, motorsport-inspired aesthetic, making it a popular choice for BMW E36 owners.

• Enhanced Performance: Improves horsepower and torque with optimized exhaust flow
• Premium Stainless Steel Construction: Ensures durability and corrosion resistance
• Iconic DTM Tail Design: Adds a distinct, race-inspired look to the E36 325/328
• Aggressive Sound Profile: Delivers a deep, sporty exhaust note
• Easy Installation: Direct-fit with OEM mounting points, no modifications required
• Available from Turner Motorsport: Reliable source for high-quality BMW performance parts

The Scorpion Exhaust - BMW E36 325/328 1991 To 1998 Cat-back System DTM Tail is a perfect blend of style, performance, and durability, making it an excellent choice for BMW E36 owners seeking to elevate their driving experience.

Our Signature Exhaust is often considered to be the most iconic, period-correct system available for your BMW E36. Extensive R&D, flawless design and superior construction are all reasons why our BMW E36 M3 Gen 3 Signature Exhaust is the number one choice for the E36 enthusiast today. This BMW exhaust is eye catching, built of 100% new Brushed Finish 304 stainless steel, sporting large 54mm twin inlet pipes, smooth mandrel bends, and dual 76mm tips with the Active Autowerke Logo embossed allow this BMW exhaust system to not only perform at a level above all other but also allow one to enjoy its beauty. 

Engineering with the ease of install in mind this is a true bolt on system like no other. Performance gains are definite and satisfying, thanks to substantially higher flow rates over the stock system. The full Active Autowerke BMW E36 M3 Exhaust system weighs in at just 34lbs allowing for some much needed weight savings over the stock system. Emitting a F1 type sound when bolted onto a stock car with it's unique hexagon style muffler this system has become the benchmark by which all other E36 systems are judged. Pair it with our BMW Cold Air Intake for the best power gains! 

Kit Features:

• Double-walled 76 mm stainless steel tips
• Dyno-tested performance
• New Brushed Finish 100% 304 stainless steel
• Thicker exhaust flanges for a tighter seal
• Large 54 mm twin inlet pipes
• Mandrel Bent Piping
• Illustrated instruction manual
• One year warranty
• True Bolt-on Design

Fits the following vehicles:
1995-1998 E36 BMW 325i/is 328i/is M3

Our new E36 Axle Back Exhaust is a versatile exhaust offering a number of options for E36 owners. With the factory exhaust you can upgrade to having valve control for different tone and volume options on the fly. For the fully upgraded or turbo owners this exhaust features a 2.0" to 3.0" exhaust pipe conversion and full 3.0" valved muffler that can be used with a custom full 3.0" exhaust.

When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.

Our Valved exhaust was designed specifically for your E36 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.

Our Turner axleback features dual 2.0" to 3.0" adapter that connects directly to your factory mid-pipes. From the adapter is full 3.0" exhaust piping with a smooth flow path to lower back pressure which leads to increased performance and a smoother exhaust tone. The 3.0" rear exhaust section flows into a full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.

New in 2023 you have two new options for E36 exhausts, our Turner valved and non valved axle back exhaust setups. With our Non Valved Axle-Back you achieve a happy medium of volume and tone but without the ability to adjust the volume. Our Valved Axle-Back is another variation and a true weapon, not only does it have the option to fit to your factory exhaust system but it is also the clear option for those looking to make a full 3.0" exhaust. After putting together the front 3.0" exhaust section you can assemble it with our Turner Valved Axle-Back for not only a full custom 3.0" exhaust but also have the luxury of volume control all with perfectly paired integrated 90's styled exhaust tips that fill out the rear valance with perfect proportions.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

Features and Benefits:

Adjustable exhaust volume
Improved flow
Dual 2.0" to 3.0" exhaust adapter
3.0" Pipe diameter (great to utilize with 3.0" turbo back while having volume control!)
Lightweight (28lbs!)
Retains factory emissions
Utilizes factory exhaust hangers
Compatible with M3 and replica M3 rear bumpers
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.5"-3.0" Stainless Steel Mandrel Bent Tubing
Sheet metal mounting brackets to utilize stock mounting locations
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Designed for smoother flow path and less backpressure
Kit Contents:

Dual 2.0" to 3.0" adapter
3.0" mid pipe section
Full 3.0" turbo-style valved muffler with integrated tips
Valve controller with installation kit and 2 key fob controllers
Clamps and hardware for installation

Enhance your BMW's exhaust system with the all-new Magnaflow Universal Muffler, available at an exceptionally affordable price point. Say goodbye to noisy and inefficient mufflers with this high-performance solution.

The Race Series muffler is meticulously designed for uncompromising performance, delivering an aggressive racecar-inspired sound. Its genuine straight-through design ensures the utmost high RPM power, while the 2.5" or 3" perforated core effectively eliminates backpressure, optimizing exhaust flow.

This muffler stands as the ideal choice for dedicated racers, turbocharged engines, nitrous oxide fuel systems, or vehicles equipped with wild cam applications. It boasts a 2.25" inlet, a 24" overall length, and a 4" diameter round, angle-cut tip.

Kindly note that this muffler is of universal fit for rear exhaust and may necessitate welding or fabrication for installation, as it is not a direct bolt-on component for any specific vehicle.

Embark on your custom exhaust project confidently with the ECS Tuning Universal Exhaust catalog, offering quality and price-friendly options. Crafted from T304 Stainless Steel for corrosion resistance, these items feature premium benefits akin to our In-House Engineered Exhaust Systems. With a 3.0" ID (Slip fit) X 65mm OD (Butt) connections, 1.5mm (.060") wall thickness tubing ensures durability. Length on the 65mm OD side is 2.25" while on the 3.0" ID side is 3.50". Ideal for fabricating your unique exhaust system, these universal parts guarantee top-tier quality and longevity.

Benefits:

• Crafted from T304 Stainless Steel for corrosion resistance
• Features premium benefits akin to In-House Engineered Exhaust Systems
• Durable construction with 1.5mm (.060") wall thickness tubing
• Ideal for fabricating custom exhaust projects
• Ensures top-tier quality and longevity

• Stainless steel construction
• Multi-chamber design for increased performance
• Chambered muffler performance sound

Add power and sound to your E36 with a performance exhaust system and free-flowing intake!

Performance Axle-Back Exhaust - E36 M3:

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.

We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems