BMW Intake Parts for BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

AFE - Corporate Logo
T#:1358
Part#: 54-12392
EO#: D-550-38
Ships in 3 Business Days
$ 387.00 USD
Free Shipping
$ 387.00 USD
Free Shipping
E36 325/328/M3 intake with US 3.0" HFM
E36 M3 intake with Euro 3.5" HFM
Maximum Flow Pro5R Filter


This air intake system produces up to 20 horsepower, 25 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a washable/reusable conical air filter that uses five layers of oiled cotton gauze filter for maximum performance. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.

5 aFe conical filter: aFe has maximized the space available in the E36 engine compartment to fit the largest available cone filter. For maximum flow and the highest horsepower gain, the Pro 5R oiled cotton gauze filter is used. The Pro 5R is a 5-layer progressive layered, oiled cotton gauze material that allows maximum air flow while trapping dust and dirt. It's a re-useable filter that needs only a shake and rinse to be cleaned and occasional re-oiling. This kit is also available with a maintenance free paper filter.

One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.

Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.

One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract!
Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below.
If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.

Please note: If you are planning to use any 3.5" HFM on your E36 M3, be SURE you are using the correct set of injectors and software too.

This item fits the following BMWs:
1992-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1995-1999 E36 BMW M3 with Euro/540 or Porsche 3.5" MAF
Show More Show Less
AFE - Corporate Logo
T#:1943
Part#: 55-10460
In Stock
$ 21.00 USD
Free Shipping on orders $49 and up

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less
AFE - Corporate Logo
T#:2656
Part#: 31-10015
In Stock
$ 97.00 USD
Free Shipping
$ 97.00 USD
Free Shipping

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series: 323i 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1992-1998
E46 3 series: 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 1999-2005
E39 5 series : 525i 528i 530i 1997-2003
E85 X3 : X3 2.5i X3 3.0i 2004-2006
Z3 : Z3 2.3 2.5 2.8 3.0 1997-2002
E85 Z4 : Z4 2.5i Z4 3.0i M54 engine 2004-2006

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Show More Show Less

AFE - Corporate Logo
T#:1708
Part#: 30-10015
Ships in 3 Business Days
$ 91.00 USD
Free Shipping
$ 91.00 USD
Free Shipping

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Fits the following BMWs:
E36 323i 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1992-1998
E46 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 1999-2005
E39 525i 528i 530i 1997-2003
E83 X3 2.5i X3 3.0i 2004-2006
Z3 2.3 2.5 2.8 3.0 1997-2002
E85 Z4 2.5i Z4 3.0i M54 engine 2004-2006

Show More Show Less

aFe Throttle Body Spacer - E36 M3
CARB certified for sale in all 50 states
AFE - Corporate Logo
T#:189816
Part#: 46-31004
EO#: D-550-11
In Stock
$ 139.00 USD
Free Shipping on orders $49 and up
The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +4hp and +8lbs. x ft. torque (measured on E36 M3 with S52 engine) . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.

This item fits the following BMWs:
1995-1999  E36 BMW  M3
Show More Show Less
AFE - Corporate Logo
T#:1703
Part#: 30-10047
Ships in 3 Business Days
$ 71.00 USD
Free Shipping
$ 71.00 USD
Free Shipping

This version uses aFe's highest flowing filter media, which uses a lightly oiled gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E30 3 series: 318i, 318is 318i Convertible 1990-1991
E30 3 series: 325e, 325es 1986-1988
E30 3 series: 325i, 325is 325ic, 325ix 1987-1991
E28 5 Series: 528e 1986-1988
E34 5 Series: 525i 1989-1990
E32 7 Series: 750il 1988-1994 (requires 2 of these filters).

 

Show More Show Less

AFE - Corporate Logo
T#:2652
Part#: 31-10047
Ships in 3 Business Days
$ 76.00 USD
Free Shipping
$ 76.00 USD
Free Shipping
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox offering significantly higher airflow than the stock paper filter. This particular filter fits the following BMWs:

E30 3 series : 318i 318is 1990-1991 - 318ic 1990-1993
E30 3 series : 325e 325es 325i 325is 325xi 325ic 1986-1991
E28 5 series : 528e 1986-1988
E34 5 series : 525i 1989-1990 M20 engine
E32 7 series : 750il 1988-1994 - 2 required
E31 8 series : 850i 850ci 850csi 1991-1999 - 2 required

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
Show More Show Less

AFE - Corporate Logo
T#:3894
Part#: 28-10093
Ships in 3 Business Days
21% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD
Free Shipping
21% off MSRP
$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD
Free Shipping
Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter�s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005� or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter�s performance�the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10171 (E36 6 Cylinder)
54-10441 (E46 323i/325i/328i/Ci 99-2003)
54-10451 (E46 330i/Ci (all) & 325i/Ci 2003-2005)
Show More Show Less

AFE - Corporate Logo
T#:193549
Part#: 54-12399
Back Ordered
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up
Our new intake boot for E36 M3 with S52 engine and 3.5" Euro HFM retains the stock ASC option while providing a full diameter tube to connect the HFM to the throttle body. Often the 3.5" HFM is used with the a reducer to fit onto the stock intake boot. This upgraded intake boot does not use the reducer which results in greater air flow to the throttle body.

This upgrade kit retains the ASC throttle body when upgrading to a 3.5" EURO MAF sensor. This coupling upgrade was designed to work with aFe’s P/N: 51-12392 / 54-12392, but it can also be used with other competitors intakes. The coupling is constructed of polyurethane for strength and durability. This engineered coupling upgrade increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

This item fits the following BMWs:
1996-1999 E36 BMW M3, M3 convertible
Show More Show Less
AFE - Corporate Logo
T#:193893
Part#: 28-10103
Ships in 3 Business Days
21% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD
Free Shipping
21% off MSRP
$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD
Free Shipping
Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter�s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005� or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter�s performance�the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-12392 (E36 6 Cylinder)
Show More Show Less
AFE - Corporate Logo
T#:1704
Part#: 30-10046
Ships in 3 Business Days
$ 91.00 USD
Free Shipping
$ 91.00 USD
Free Shipping
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series : 318i 318is 318ti
Z3 : Z3 1.9

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
Show More Show Less


AFE - Corporate Logo
T#:2654
Part#: 31-10046
Back Ordered
$ 97.00 USD
Free Shipping
$ 97.00 USD
Free Shipping

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series: 318i 318is 318ic 318ti 1992-1998
Z3 : Z3 1.9

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

  • Constructed with 100% polyurethane
  • Two layers of progressively finer mesh synthetic media
  • Washable and reusable for multiple cleaning cycles
  • Excellent dust-holding capacity for a longer service cycle between cleanings
  • Integrated urethane bump seal insures a tight, no leak seal
  • Outflows stock paper filter for improved horsepower and torque
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
In Stock
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Oct 19, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less

Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Oct 19, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21176933
Part#: BMS-WMI-FIL
Ships on Oct 19, 2026
$ 15.00 USD
Free Shipping on orders $49 and up
This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Oct 19, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20815192
Part#: BMS.SA.WMI.NOZ
Ships on Oct 30, 2026
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! ​Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less