Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

The 6-speed Getrag 420G transmission, found in the European E36 M3 Evolution and E46 M3, has become an increasingly popular swap amongst E36 owners. Its increased strength, longevity, and overdrive sixth gear make it a great choice for both track cars and daily drivers. Unfortunately, many of the components needed to complete this transplant have become hard to source. Despite increased demand from enthusiasts, BMW has blocked the sale of European E36 M3 parts into North America.

Recognizing this issue, we set out to develop a replacement for the unavailable, 420G-specific transmission crossbrace. Our initial investigation revealed that the factory cast aluminum construction was failure-prone, so durable 5GA 1018 steel was chosen to provide a lasting upgrade. The Turner Motorsport Heavy-Duty Transmission Crossmember is finished in a brilliant silver powder coat to resist corrosion and maximize appearance. Despite being much stronger than the factory crossmember, our design is dimensionally identical, ensuring a perfect fit with your six-speed swap.

Design:

Manufactured from durable 5GA 1018 steel - much stronger than OEM cast aluminum construction Finished in brilliant silver powder coating for maximum corrosion resistance Steel gussets are welded to the main bracket for added strength and power-holding capability Integrated locating dowels prevent bushing rotation and ensure proper alignment under load Dimensionally identical to the OEM part - fully compatible with OE-style bushings and factory hardware Features & Benefits:

Direct replacement for Genuine European BMW part number 23702227892 Finished in brilliant silver powder coating for maximum corrosion resistance Retains factory mounting points and driveline geometry for hassle-free installation Product Development:

Our Heavy Duty Transmission Crossmember was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Unlike factory rubber hoses, silicone can withstand higher temperatures and pressures with minimal wear. Rubber will wear out and weaken so don't let it bite you when it counts! Silicone has been proven during extreme racing conditions and won't be the weak link that ruins your day.

This E36 ECS silicone hose set replaces two hoses - 
11531708499, upper radiator hose 
11531726344, lower radiator hose 

Upgrade your E30 or E36 cooling system effortlessly with the Condor fan relay harness designed specifically for SPAL fans. This harness seamlessly integrates with your existing OEM radiator temperature switch (we recommend the 80/88c E36 sensor), making installation a breeze. Here are the key features of this kit:

Seamless integration with OEM radiator temperature switch Compatibility with SPAL fans for efficient cooling Triggering of the relay when the temperature threshold is met Weatherproof fuse holder for added protection High-temperature wire for reliable performance Durable wire sleeving resistant to abrasion, chemicals, and UV rays Two easy-to-install options for connecting to the BMW radiator temperature switch, labeled for simplicity Experience consistent and effective fan operation with the Condor fan relay harness, ensuring optimal cooling performance for your vehicle.

Upgrade the cooling system of your BMW with the BMW E36 High Performance Aluminum Radiator with Silicone Radiator Hoses. This high-quality radiator kit is designed specifically for BMW E36 models, providing improved cooling efficiency and durability. Paired with silicone radiator hoses, this kit offers superior heat resistance and reliability, making it ideal for high-performance applications. Enhance the cooling performance and reliability of your BMW with this premium radiator kit.

• Improved cooling efficiency for better engine performance
• Durable aluminum construction for long-lasting use
• Silicone radiator hoses offer superior heat resistance
• Designed specifically for BMW E36 models

Upgrade Your BMW Maintenance with Stainless Steel Hose Clamps from ECS Tuning

ECS Tuning introduces premium full stainless steel hose clamps, offering superior quality and convenience for your BMW maintenance. Avoid dealership delays and overpricing by choosing from a selection of band widths, ensuring you receive top-quality hose clamps without overpaying.

Key Benefits:

• Premium full stainless steel hose clamps
• Various band widths for enhanced convenience
• High-quality alternative to dealership pricing
• Readily available stock eliminates waiting time

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943