BMW Maintenance & Tune-Up Parts for BMW 5 Series E39 (1996-2003)

This is an OEM INA tensioner pulley, also known as the adjusting pulley and lower pulley. This pulley is mounted on the belt tensioner near the center of the belt assembly. The upper and lower pulleys are known to be the primary sources for 'belt squealing'. This pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner
1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner
2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner
2000-2006 X5 3.0 liter (E53 chassis)
2004 E60 525i, 530i (M54 engine)
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

This is an OEM INA AC Belt Tensioner with pulley for all 2001-2006 E46 M3, as well as all 1999-2002 non-M E46 3 series models. These belt tensioner units are known to fail, and include the tensioner pulley (as shown).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This Air Conditioning / AC Belt Tensioner with Pulley fits:
1999-2000 E46 3 Series 323i, 323Ci, 328i, 328Ci
2001-2002 E46 3 Series 325i, 325Ci, 330i, 330Ci
2001-2006 E46 M3 coupe & convertible

High performance ignition kit for your M54 featuring spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

For Alternator / Water Pump Belt

Hydraulic Belt Tensioner for E36, E46, E39 6-cyl models. This is the oil-filled tensioner that keeps the main drive belt in the proper tension. Over time the piston seals inside allow fluid to leak out. The tensioner becomes frozen or inoperable. Replacement is the best corrective action to take. This can be done during any belt or pulley service or anytime the fan is off the engine.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

NOTE: These BMW's may have been equipped with either a mechanical or hydraulic tensioner. Only for cars with Hydraulic Belt Tensioners. Please check before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i
1999-2000 E46 323i, 323Ci, 328i, 328Ci
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
2001-2006 E46 M3 coupe & convertible
2000-2006 X5 3.0 liter (E53 chassis)
2006 525i, 530i(M54 engine)
1997-2002 Z3 & MZ3 2.8, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

By the early 1990s, BMW had phased out its canister-style ignition coil in favor of an individual coil-on-plug system. The venerable M50 was one of the first engines to receive this update, which boasts greater overall efficiency through increased ignition control and spark energy. Unfortunately, over two decades later, the ignition coils used on the M50, M52, S50, and S52 engines are antiquated at best. Our team of engineers and BMW enthusiasts realized the need for an ignition system upgrade and set out to modernize the M5X ignition system with performance ignition coils pulled from the B58 parts bin.

WHY UPGRADE?

B58 ignition coils provide up to 2.5 times more spark energy than OE M5X ignition coils, effectively eliminating misfires even on high-performance setups. Whether your vehicle is heavily modified or completely stock, these ignition coils deliver unparalleled performance with zero downsides! For tuners, the Turner Motorsport kit also allows for precise adjustments to ignition dwell time through standalone engine management, giving you complete control over your engine’s performance.

Our kit utilizes the factory mounting locations and includes a proprietary boot design with a built-in 1k OHM resistor. Unlike many aftermarket options, our design prevents electrical contact springs from burning out, ensuring long-term reliability and durability. The included ignition coil bracket and cover plate are manufactured from durable 5052 aluminum, combining rugged durability with a premium aesthetic. Designed and optimized in-house using cutting-edge 3D scanning hardware and CAD software, our kit ensures a perfect fit and a clean, factory-like appearance. Installation is a breeze with the included adapter harness, allowing you to add modern ignition coils to your M5X with ease!

Eliminate misfires and unleash the full potential of your M5X-equipped BMW with our industry-leading B58 ignition coil upgrade. Designed for easy installation and unparalleled reliability, it’s the ultimate plug-and-play solution for performance enthusiasts.

FEATURES:

B58 ignition coils offer upwards of 2.5x more spark energy than the OE M5X ignition coils Eliminates common ignition system defects - no more chasing misfires or swapping around coil packs! The included brackets, cover plates, wiring harness adapters, and proprietary boots make for an easy installation Confirmed functionality with factory M3.3.1 (OBDI) and MS41 (OBDII) DME software PART DESIGN:

Bolt-on ignition coil brackets are manufactured from 5052 aluminum and feature a black anodized coating for superior durability, ensuring a lasting finish 5052 brushed aluminum cover plates ensure a cohesive, OEM+ aesthetic Utilizes factory ignition coil mounting locations and corresponding hardware for easy installation Our proprietary rubber boot design incorporates the factory B58 1K OHM resistor, preventing the electrical contact failure commonly associated with other aftermarket kits Coil adapter harnesses feature durable Weatherpack connectors, safeguarding each wire from exposure to water Compact design allows for retaining the factory beauty cover and/or clearance with aftermarket top-mount turbocharger kits KIT CONTENTS:

Turner Motorsport B Series Ignition Coils for M50, M52, S50, and S52 (6) Turner Motorsport B58 Ignition Coil Conversion Wiring Harnesses (6) Turner Motorsport B58 Ignition Coil Conversion Brackets & Cover Plates (6) Optional Selections: Spark Plugs: NGK BKR6EQUP (OEM), Bosch FGR7DQP (OEM), BMW 12120037607 (Genuine) Spark Plug Socket: Schwaben Extended 5/8" (16mm) Magnetic Spark Plug Socket, Bavarian Autosport 12" x 5/8" Spark Plug Socket INSTALLATION & SUPPORT:

Need installation tips? Our R&D team has assembled a full, start-to-finish installation tutorial, including detailed removal instructions and high-definition images! See the Installation PDF under the "INSTALLATION" tab for more information.

This is the tensioner pulley assembly for the serpentine belts on E39 540i and E38 740u with M62 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system. OEM replacement for BMW part # 11281742858 and 11287503424.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
4/1997-1998 E38 BMW 740i 740il 
1998 E39 BMW 540i