BMW Suspension Parts for BMW 5 Series E39 (1996-2003)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Front Differential Bushing - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362591
Part#: 33171090389
In Stock
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
Meyle Rear Guide Link - E38 E39
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362102
Part#: 33326768791
In Stock
$ 67.99 USD
Free Shipping
$ 67.99 USD
Free Shipping
This is a new rear guide link with a new balljoint and rubber bushing.
Meyle Rear Subframe Bushing - E39
For sedan models only
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579247
Part#: 3003331104
Ships on Dec 23, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Used on all four corners of rear subframe.

Packaged by Turner - Corporate Logo
T#:338099
Part#: 33326777424S1
Ships on Nov 9, 2026
Starting at $ 79.99 USD
Free Shipping
Starting at $ 79.99 USD
Free Shipping
This rear guide rod for the E39 chassis helps to control the toe alignment of the car (the horizontal in/out angle of the tire). There is a rubber bushing on the inside and a ball joint on the outside mounting point. When the bushings on the arm wear out they can contribute to a 'wandering' or 'loose' or unstable feeling in the rear. There may also be a clunking noise associated with bumps. This arm is just one part of the rear suspension, and other parts should be checked to confirm which one is causing the issues. For a complete overhaul of the rear suspension, check out our rear control arm package here .

Brand: Febi-Bilstein, Meyle
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
12/2001-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-10/2006 E65 BMW 745i 745li 750i 750li 760i 760li
Show More Show Less

Meyle - Corporate Logo
T#:2216
Part#: E396HDARMS
Ships on Dec 23, 2026
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel.

This is a package of Meyle HD control arms with the HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 141 717 and 31 12 1 141 718.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 525i, 525iT, 528i, 528iT, 530i sedans and touring wagons
2000-2003 E52 Z8 Z8 - Z8 Alpina

Show More Show Less
Meyle Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...
Two required per vehicle, one per side.
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362103
Part#: 33326767748
Ships on Dec 23, 2026
$ 243.99 USD
Free Shipping on orders $49 and up
$ 243.99 USD
Free Shipping on orders $49 and up
Pressed into rear wheel carrier

Packaged by Turner - Corporate Logo
T#:338725
Part#: E39SUSPX6CYL
In Stock at Vendor
$ 1,317.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,198.99 USD
Free Shipping
Starting at $ 1,198.99 USD
Free Shipping
Looking to emphasize the sporty side of your 5-series? You can reduce bodyroll and improve the handling with this Bilstein-H&R sport package. By lowering the ride height and center of gravity, and stiffening the springs the car will not roll as much in turns. With less weight transfer the tires stay planted to the road and allow you to carry more speed. All of this with hardly any penalty in the ride quality.

H&R Sport springs lower the ride height by up to 1.3" in front and .75" in the rear depending on if the car has the factory sport suspension or not. The spring rate is also stiffer. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (29742-1 or 29742-2)
  • 1 pair - Bilstein Front Sport struts (VE3-B407 / 35-114079)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-2829 / 24-028295)

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582863
Part#: T31121092609KT2
Ships in 2 Business Days
$ 565.99

This product was last offered at the strikethrough price on
06-08-2026

$ 522.99 USD
Free Shipping
$ 522.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms - Curved & Straight
All New Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:582858
Part#: T31129068753KT
Ships in 1-2 days
Sale - Save 23% $ 1,044.99

This product was last offered at the strikethrough price on
06-30-2026

$ 806.13 USD
Free Shipping
Sale - Save 23%
$ 1,044.99

This product was last offered at the strikethrough price on
06-30-2026

$ 806.13 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Front Strut Mounts
Control Arms
Outer Tie Rods
Sway Bar End Links

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5802187
Part#: T31121092609BKT
Back Ordered
Sale - Save 3% $ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,141.21 USD
Free Shipping
Sale - Save 3%
$ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,141.21 USD
Free Shipping
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension. This Level 2 kit replaces: Control Arms Front Thrust Arms with mono-ball bushings installed Bushings Hardware Outer Tie Rods Stabilizer End Links
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582851
Part#: T31121092609KT
Back Ordered
Sale - Save 6% $ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 678.51 USD
Free Shipping
Sale - Save 6%
$ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 678.51 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise free suspension.

This Level 2 kit replaces:

Control Arms
Bushings
Hardware
Outer Tie Rods
Stabilizer End Links

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338724
Part#: E39SUSPX540
Ships in 3 Business Days
$ 1,417.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,343.99 USD
Free Shipping
Starting at $ 1,343.99 USD
Free Shipping
The first step in reducing bodyroll and making this car faster through turns is to replace the shocks and springs. The lower, stiffer H&R Sport springs for the 535i will lower the ride height and manage weight transfer better than the stock suspension. We package these H&R Springs with a set of Bilstein Sport shocks for a complete upgrade in a discounted package.

H&R Sport springs lower the ride height up to 1.3" (less on cars with factory sport suspension) and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (29764 or 50464)
  • 1 pair - Bilstein Front Sport struts (VE3-B409 / 35-114093)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-2829 / 24-028295)

Ride Height Lowering -
540i standardFront -1.3" / Rear -0.75"
540i sportFront -.75" / Rear -0.6"

This item fits the following BMWs:
1997-2003 E39 BMW 540i Sedan
Show More Show Less


Packaged by Turner - Corporate Logo
T#:553681
Part#: 31311139453KT2
In Stock
Sale - Save 8% $ 435.49

This product was last offered at the strikethrough price on
04-30-2026

$ 400.25 USD
Free Shipping
Sale - Save 8%
$ 435.49

This product was last offered at the strikethrough price on
04-30-2026

$ 400.25 USD
Free Shipping

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

E39 540i 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:24987
Part#: TMS24987
Ships on Aug 31, 2026
$ 1,035.84

This product was last offered at the strikethrough price on
07-01-2026

$ 1,031.37 USD
Free Shipping
$ 1,031.37 USD
Free Shipping
This E39 sport suspension uses the H&R Sport lowering springs with the factory OEM Sachs sport suspension shocks to deliver better handling, lower stance, and near-stock levels of ride comfort. Where a Bilstein Sport is a true performance shock, the factory Sachs sport shocks are milder and easier on rough pavement. For a lowered height and prime ride comfort choose this H&R/Sachs kit. For the ultimate performance shock/spring package, choose the H&R/Bilstein kit.

H&R Sport springs lower the ride height by up to 1.3" in front and .75" in the rear depending on if the car has the factory sport suspension or not. The spring rate is also stiffer. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

Because this package uses the stock OEM sport shocks this can be a great upgrade for a non-sport car or a direct refreshening for a car with sport package. These are made by Sachs - one of BMW's suppliers for 50 years. For this package we also include front and rear bump stops (shorter and stiffer than non-sport) and front dust boots (rear boots can be re-used).

Parts list:
  • 1 set - H&R Sport Springs (29742-2)
  • 1 pair - Sachs front strut assembly (31311096857)
  • 1 pair - front bump stops (31331138814)
  • 1 pair - front dust boots (31331091868)
  • 1 pair - Sachs rear shock assembly (33521091922)
  • 1 pair - rear bump stops (33532229697)

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
Show More Show Less
Front Straight Control Arm - Left
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376675
Part#: 31121141961
Ships on Dec 23, 2026
$ 80.99 USD
Free Shipping on orders $49 and up

Brand: Meyle 

 

This is the Front Left Lower Control Arm for BMW E39 540i 540i Wagon & M5. The lower control arms include the ball joint and bushing.

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 540i, 540i Wagon, M5

Show More Show Less

Packaged by Turner - Corporate Logo
T#:582910
Part#: T31129068753KT1
Ships on Dec 23, 2026
Sale - Save 26% $ 402.99

This product was last offered at the strikethrough price on
02-27-2026

$ 297.19 USD
Free Shipping
Sale - Save 26%
$ 402.99

This product was last offered at the strikethrough price on
02-27-2026

$ 297.19 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Control Arm Bushings

Show More Show Less

Front Straight Control Arm - Right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376678
Part#: 31121141962
Ships on Dec 23, 2026
$ 86.99 USD
Free Shipping on orders $49 and up
This is the Front Right Lower Control Arm for BMW E39 540i 540i Wagon and M5.

This item fits the following BMWs:
1997-2003  E39 5 Series  BMW 540i, 540i Wagon, M5
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583050
Part#: T33326767748KT4
Back Ordered
$ 610.99

This product was last offered at the strikethrough price on
04-23-2026

$ 609.49 USD
Free Shipping
$ 609.49 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Shock Mounts
Ball Joints
Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:182513
Part#: TMS182513
Back Ordered
Sale - Save 6% $ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 716.44 USD
Free Shipping
Sale - Save 6%
$ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 716.44 USD
Free Shipping
Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

    You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540 M5i
    with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583079
    Part#: T33522229854KT
    Ships in 6 Business Days
    Sale - Save 2% $ 968.99

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 953.71 USD
    Free Shipping
    Sale - Save 2%
    $ 968.99

    This product was last offered at the strikethrough price on
    08-10-2026

    $ 953.71 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts
    Diff Bushings
    Control Arms & Bushings
    Sway Bar End Links
    Hardware

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:182511
    Part#: TMS182511
    Back Ordered
    $ 518.34

    This product was last offered at the strikethrough price on
    08-07-2026

    $ 484.12 USD
    Free Shipping
    $ 484.12 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • front bump stop
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i
    with factory sport suspension
  • Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583019
    Part#: T33326767748KT
    Ships in 6 Business Days
    $ 671.99

    This product was last offered at the strikethrough price on
    04-23-2026

    $ 669.88 USD
    Free Shipping
    $ 669.88 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Control Arms
    Rear Control Arm Bushings
    Rear Ball Joints
    Rear Strut Mount
    New Hardware

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:16175687
    Part#: 31331091708-KT
    Ships in 6 Business Days
    Sale - Save 2% $ 586.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 574.36 USD
    Free Shipping on orders $49 and up
    Sale - Save 2%
    $ 586.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 574.36 USD
    Free Shipping on orders $49 and up
    If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583049
    Part#: T33326767748KT3
    Ships on Dec 23, 2026
    $ 702.18

    This product was last offered at the strikethrough price on
    07-09-2026

    $ 700.92 USD
    Free Shipping
    $ 700.92 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Upper Control Arm
    Rear Ball Joints
    Shock Mounts
    Hardware

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:56110328
    Part#: 31121092609/1KT2
    In Stock
    New Item
    $ 367.99 USD
    Free Shipping on orders $49 and up
    This replacement kit includes both left and right front curved control arms manufactured by Lemförder, the exact supplier BMW uses on the assembly line.
    Performance Suspension Cup Kit - Sport - E39
    For Sedan Models Without Sport Suspension
    Packaged by Turner - Corporate Logo
    T#:56363342
    Part#: 35-114079KT2
    In Stock at Vendor
    New Item
    $ 1,198.99 USD
    $ 1,198.99 USD
    This kit matches progressive H&R Sport Springs with high pressure Bilstein B8 Performance Plus Gas Dampers. Because the B8 features a internally shortened piston rod, it pre loads the H&R spring correctly keeping the damper in its intended stroke range
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:15710798
    Part#: 32211091723-KT
    Back Ordered
    Sale - Save 7% $ 642.99

    This product was last offered at the strikethrough price on
    03-09-2026

    $ 600.37 USD
    Free Shipping on orders $49 and up
    Sale - Save 7%
    $ 642.99

    This product was last offered at the strikethrough price on
    03-09-2026

    $ 600.37 USD
    Free Shipping on orders $49 and up
    Symptoms include a loose and imprecise feel to the steering, as well as excessive shaking and vibration through the steering that increases with speed and braking. Individuals may also experience squeaking, whining or grinding from the front when turning at slow speeds. Other symptoms include a knocking or "clunking" in the front over rough road related to the sway bar bushings and upper strut mounts. With the proper tools, replacement of these components will take approximately 1 day.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:56291014
    Part#: E39M5-DINBILKT2
    Ships in 8 Business Days
    New Item
    $ 1,277.95 USD
    $ 1,277.95 USD
    While Dinan opts for custom valved Konis in their S1 package, some prefer pairing Dinan’s lowering springs with Bilstein B8 Performance Plus dampers. You get superior gas pressure handling, monolithic Bilstein build quality, and incredible street compliance all while saving over $800 compared to the full Koni equipped Dinan kit.
    Show More Show Less

    Rear Sway Bar Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594570
    Part#: 33551093663
    Ships in 1-2 days
    $ 4.03 USD
    Free Shipping on orders $49 and up
    One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:638359
    Part#: 31311139453KT3
    In Stock
    Sale - Save 9% $ 426.99

    This product was last offered at the strikethrough price on
    04-30-2026

    $ 389.02 USD
    Free Shipping
    Sale - Save 9%
    $ 426.99

    This product was last offered at the strikethrough price on
    04-30-2026

    $ 389.02 USD
    Free Shipping
    This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

    Packaged by Turner - Corporate Logo
    T#:583047
    Part#: T33326768791KT1
    Ships in 9 Business Days
    $ 885.99

    This product was last offered at the strikethrough price on
    08-11-2026

    $ 867.99 USD
    Free Shipping
    $ 867.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Upper Control Arms
    Ball Joints
    Shock Mounts
    Hardware

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583046
    Part#: T33326768791KT
    Ships in 9 Business Days
    $ 724.99

    This product was last offered at the strikethrough price on
    07-08-2026

    $ 723.99 USD
    Free Shipping
    $ 723.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Control Arms
    Ball Joints
    Rear Shock Mounts
    Hardware

    Show More Show Less

    Meyle Rear Sway Bar End Link - E39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579251
    Part#: 3003355105
    Ships on Dec 23, 2026
    $ 18.99 USD
    Free Shipping on orders $49 and up

    Replacement REAR sway bar / swaybar link for all 1997-2003 5 series sedans and wagons. Made by Meyle, this is a very common wear item in the E39 suspension, especially when the car has been driven hard. While replacing this part, also check the sway bar bushing bracket for signs of stress or failure. It can be used on both the left and right side of the car. Two required per car, and are sold individually.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i 540i M5

    Show More Show Less

    Meyle Control Arm - Straight Arm - E39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:368944
    Part#: 31121094234
    Special Order: No Guaranteed ETA
    $ 81.99 USD
    Free Shipping on orders $49 and up
    Complete control arm with bushings and ball joint
    Meyle Front Sway Bar Bushing - E39
    For vehicles with sport suspension
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579346
    Part#: 3146150021
    Special Order: No Guaranteed ETA
    $ 13.99 USD
    Free Shipping on orders $49 and up
    $ 13.99 USD
    Free Shipping on orders $49 and up
    Fits 24mm diameter sway bar
    Meyle Front Sway Bar Bushing - E39
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:378184
    Part#: 31351093108
    Special Order: No Guaranteed ETA
    $ 10.99 USD
    Free Shipping on orders $49 and up
    22.5mm rubber bushing


    Meyle - Corporate Logo
    T#:40275174
    Part#: 3147400003
    Special Order: No Guaranteed ETA
    $ 28.99 USD
    Free Shipping on orders $49 and up
    This sleeve encases the bump stop to provide extra protection.
    Rear Differential Bushing - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:375932
    Part#: 33171093008
    Special Order: No Guaranteed ETA
    $ 19.99 USD
    Free Shipping on orders $49 and up
    Meyle - Corporate Logo
    T#:362101
    Part#: 33326770749
    Special Order: No Guaranteed ETA
    $ 28.99 USD
    Free Shipping on orders $49 and up
    Attaches to rear ball joint and rear wishbone assembly

    Meyle Rear Shock Absorber - Priced Each
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:5958661
    Part#: 33521094046
    Special Order: No Guaranteed ETA
    $ 92.99 USD
    Free Shipping on orders $49 and up
    Improve handling, safety, and ride quality with new shock absorbers. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
    Show More Show Less

    Meyle - Corporate Logo
    T#:40478109
    Part#: 3146400000
    Special Order: No Guaranteed ETA
    $ 19.99 USD
    Free Shipping on orders $49 and up
    Shield your BMW’s front suspension with the Meyle 3146400000 Front Shock Dust Boot. Built to OE specs for a factory-fit finish, this boot keeps road grime, moisture, and debris out—helping extend shock life and preserve crisp handling. Whether you're tackling backroads or your daily drive, it’s a quick, budget-friendly upgrade that supports smoother rides and long-lasting suspension performance.
    Show More Show Less
    Meyle - Corporate Logo
    T#:40275179
    Part#: 3147400004
    Special Order: No Guaranteed ETA
    $ 28.99 USD
    Free Shipping on orders $49 and up
    Prevent early shock failure caused by debris striking the shocks.

    Meyle Front Strut Assembly - E39
    For sedan models with production date from 10/1999
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:579422
    Part#: 31311096858
    Special Order: No Guaranteed ETA
    $ 108.99 USD
    Free Shipping
    $ 108.99 USD
    Free Shipping
    Improve handling, safety, and ride quality with new strut inserts
    Meyle - Corporate Logo
    T#:55497476
    Part#: 3147390003
    Special Order: No Guaranteed ETA
    New Item
    $ 37.99 USD
    $ 37.99 USD
    This MEYLE-ORIGINAL Rear Coil Spring is a premium, cost-effective replacement designed to restore chassis dynamics and correct factory ride height. Built from high-tensile spring steel, these springs go through rigorous dimensional testing to ensure they mirror original equipment specifications for spring rate and geometry.
    Show More Show Less

    Meyle - Corporate Logo
    T#:40342808
    Part#: 33326767748
    Special Order: No Guaranteed ETA
    $ 243.99 USD
    Free Shipping on orders $49 and up
    $ 243.99 USD
    Free Shipping on orders $49 and up
    Available through Turner Motorsport, this product delivers superior German engineering for a smooth, quiet ride and long-lasting suspension performance.

    Packaged by Turner - Corporate Logo
    T#:182510
    Part#: TMS182510
    Back Ordered
    $ 491.44

    This product was last offered at the strikethrough price on
    08-07-2026

    $ 457.22 USD
    Free Shipping
    $ 457.22 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

    You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i
    with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:182514
    Part#: TMS182514
    Back Ordered
    Sale - Save 6% $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 823.88 USD
    Free Shipping
    Sale - Save 6%
    $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 823.88 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • front bump stop
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i
    with factory sport suspension
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583097
    Part#: T33521093416KT1
    Back Ordered
    Sale - Save 4% $ 1,062.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,020.90 USD
    Sale - Save 4%
    $ 1,062.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,020.90 USD

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts
    Diff Bushings
    Control Arms & Bushings
    Sway Bar End Links
    Hardware

    Show More Show Less