BMW Suspension Parts for BMW 5 Series E39 (1996-2003)

BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

For Sedan models without Air Suspension

T#:555861

Part#: I-06-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

8k Front & 6k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

Bilstein PSS9 Coil-Over Suspension - E39 540i, M5

10X Entries Into Our F80 M3 Sweepstakes

T#:344023

Part#: 48-104555

In Stock

$ 2,199.00 USD

Add to Wish List

Qty

$ 2,199.00 USD

Add to Wish List

The B16 PSS9 coil-overs offer a stiffer spring rate than stock and a lower ride height for less body roll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil-over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 540i Tour...

For Touring Models Only

T#:555834

Part#: I-42-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

8k Front & 8k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

Bilstein B14 PSS Coil-Over Suspension - E39 540i M5 - (NO LONGER AVAI...

For sedan models only '00-'03

10X Entries Into Our F80 M3 Sweepstakes

T#:341218

Part#: 47-111264

Ships in 2 Business Days

$ 1,289.00 USD

Add to Wish List

Qty

$ 1,289.00 USD

Add to Wish List

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.

Show More Show Less

E39 540i/M5 Bilstein PSS Coil-Over Suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:338924

Part#: HE5-B126-H3

Ships in 2 Business Days

Starting at $ 1,289.00 USD

Add to Wish List

Starting at $ 1,289.00 USD

Add to Wish List

Bilstein's PSS coil over system for the E39 540/M5 combines the best features of the adjustable PSS9 but with fixed dampening rates and a lower price. The PSS kit features height-adjustable springs paired with performance-tuned monotube shock absorbers. It's better than the standard sport shock/spring package thanks to its adjustable ride height and matched shock and spring rates. With a lower ride height and stiffer springs you get less bodyroll and better handling. These are the most user-friendly coil over kits on the market - no special mounts required (works with stock 540/M5 mounts) and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

PSS fixed monotube shocks are matched to the progressive-rate springs and tuned for performance. The PSS does not have the adjustable shock settings like the PSS9. Instead the damping is set at a performance level. Bilstein features a monotube shock design in this kit - one large shock piston instead of two smaller pistons. The larger piston is better at dissipating heat and controlling small shock movements. The rest of the shock is identical to the more expensive PSS9 - zinc coated shock bodies, aluminum spring seats and lock collars, fine rounded threads for precise height adjustments, and tuned progressive-rate springs.

The PSS is height adjustable! Ride height adjustments are done from perches on the bottom of each spring. You can set the ride height between 1.0 to 2.0 inches lower than stock ride height. On the E39 we recommend a front to rear rake of .75" (higher rear). Bilstein uses progressive-rate springs to keep the ride smooth yet sporty. Overall, the PSS springs are stiffer than other coil over kits and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. Rear shocks are also coil over, just like the factory shocks. The struts are zinc coated for excellent wear and corrosion resistance.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock mounts. On the front, Bilstein has an ingenious upper spring perch that allows you to retain the stock spring radial bearing. We recommend getting new front upper bearings. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as the factory strut, except you use the Bilstein upper spring perch in place of the stock perch. A OEM mount kit or adjustable camber plates are also available. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Assembly Photos

OEM strut mount	KMAC Camber/Caster Plates

Note: photos show mounts installed. This is for reference only. Mounts are sold separately.

This Bilstein PSS9 coilover kit fits the following BMWs:
1997-2003 E39 BMW 540i M5

Show More Show Less

Bilstein B14 PSS Coil-Over Suspension - E39 528i 525i 530i

For vehicles without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R For sedan models without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R

10X Entries Into Our F80 M3 Sweepstakes

T#:344121

Part#: 47-100763

In Stock

$ 1,289.00 USD

Add to Wish List

Qty

$ 1,289.00 USD

Add to Wish List

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

Threaded body adjustable range of 20 mm
Lowering of approx. 30-50 mm at front and rear
Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
Aluminum Spring plates and lock nuts
Surface coating using Triple-C-Technology for long-lasting corrosion resistance
Round threads for easy adjustment
Quality sport springs made from highly durable material
Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

Fits these vehicles:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - E39 525i 528i 530i 540i S...

For Sedan models without Air Suspension

T#:568111

Part#: I-06E-BR

Ships on Oct 21, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - E39 525i 528i 530i 540i (...

T#:568083

Part#: I-42E-BR

Ships on Oct 21, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

Bilstein B12 Sportline Suspension System - E39 528i 525i 530i ...

10X Entries Into Our F80 M3 Sweepstakes

T#:344120

Part#: 46-180926

Special Order: No Guaranteed ETA

$ 1,119.00 USD

Add to Wish List

Qty

$ 1,119.00 USD

Add to Wish List

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling.

Bilstein B12 Features:

Quick response and precise handling
Springs and shocks road tested and fine-tuned to complement one another
Bilstein Monotube/Inverted gas pressure technology
TUV certified
Made In Germany
Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 528i 525i ...

For Touring models only without rear air suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:346249

Part#: 46-180872

Special Order: No Guaranteed ETA

$ 1,119.00 USD

Add to Wish List

Qty

$ 1,119.00 USD

Add to Wish List

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.

Bilstein B12 Features:

Precise response and excellent driving performance
Springs and shocks road tested and fine-tuned to complement one another
Bilstein Monotube/Inverted gas pressure technology
TUV certified
Made In Germany
Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 BMW 528i 525i ...

For Touring models only with rear air suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:346250

Part#: 46-180896

Special Order: No Guaranteed ETA

$ 1,119.00 USD

Add to Wish List

Qty

$ 1,119.00 USD

Add to Wish List

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.

Bilstein B12 Features:

Precise response and excellent driving performance
Springs and shocks road tested and fine-tuned to complement one another
Bilstein Monotube/Inverted gas pressure technology
TUV certified
Made In Germany
Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - E39 BMW 528i 530i 525i ...

For vehicles without EDC. Average lowering of 1.2"F 0.8-1.0"R For sedan models without EDC. Average lowering of 1.2"F 0.8-1.0"R

10X Entries Into Our F80 M3 Sweepstakes

T#:344119

Part#: 46-180841

Ships in 1 Business Day

$ 1,119.00 USD

Add to Wish List

Qty

$ 1,119.00 USD

Add to Wish List

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.

Bilstein B12 Features:

Precise response and excellent driving performance
Springs and shocks road tested and fine-tuned to complement one another
Bilstein Monotube/Inverted gas pressure technology
TUV certified
Made In Germany
Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

BC Racing DS Series Coilover Kit - E39 525i 528i 530i 540i Sedan ...

For Sedan models without Air Suspension

T#:598258

Part#: I-06-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

For Sedan models without Air Suspension

Only Fits Sedan

T#:4319906

Part#: I-06-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable

Show More Show Less

Front Upper Spring Perch With Radial Bearing - E38, E39, E46 M3, E60 ...

For vehicles with EDC

T#:118

Part#: 31331090612

In Stock

3% off MSRP $ 34.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.85 USD

Add to Wish List

Qty

3% off MSRP

$ 34.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.85 USD

Add to Wish List

If you are removing or changing the front struts or springs or replacing the upper strut mount, NOW is the perfect time to replace this upper spring perch. BMW calls it a "upper spring pocket with axial cage bearing". It's really the upper spring plate with the radial bearing set sandwiched between two plastic collars. The bearing is there to allow the spring to rotate a little before going into a bind. If there are popping noises coming from the front strut it's probably because this bearing set is worn or missing. The bearing insert is a common wear item becoming noisy, gritty, or will just fail completely. You won't feel that they're bad from driving the car but you may hear clunking or popping sounds from the front struts. You can replace the rubber mounts on the car but don't leave this part out! It may be just as worn and you won't want to put them back in the car. These are sold individually, so be sure to get two for your car.

The radial bearing set is used in some of our camber plate designs. It's compact, light weight, easy to replace, and inexpensive. It's an excellent alternative to pricey and obscure ball bearing sets found in other camber plates.

Upper Bearing/Spring Perch Applications:
1994-2001 E38 740i, 740iL, 750iL
1997-2003 E39 528i, 530i with EDC - electronic damping control - suspension only
1997-2003 E39 540i, M5
2001-2006 E46 M3
2000-2003 E52 Z8 Roadster, Alpina Roadster
1999-2006 E53 X5 , including 3.0, 4.4i, 4.6is
2006-2010 E60 M5
2006-2010 E63, E64 M6 coupe, cabrio
2002-2008 E65, E66 745i, 745Li, 750i, 750Li, 760Li
2006-2008 E85, E86 Z4 M Roadster, M Coupe

Show More Show Less

Bilstein Front Strut Mount - E39 E46 E60 E61 F07 F10

For vehicles with a production date from 09/1997+

10X Entries Into Our F80 M3 Sweepstakes

T#:344302

Part#: 12-248940

In Stock

$ 58.00 USD

Add to Wish List

Qty

$ 58.00 USD

Add to Wish List

Complete front strut mount with bearing and retaining hardware

Bilstein Coil Over Spanner Wrench Set (Notch Style)

10X Entries Into Our F80 M3 Sweepstakes

T#:1702

Part#: 19101X

In Stock

$ 22.03 USD

Add to Wish List

Qty

$ 22.03 USD

Add to Wish List

Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).

Show More Show Less

Front Upper Spring Pad - E46 M3 E39 E60 E38 X5 Z4

T#:5343

Part#: 31331091233

Ships in 1 day

Sale - Save 40% $ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.12 USD

Add to Wish List

Qty

Sale - Save 40%

$ 74.99

This product was last offered at the strikethrough price on
06-26-2026

$ 45.12 USD

Add to Wish List

This is the front upper spring pad. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.

This item fits the following BMWs:
1999-2005 E46 BMW M3 M3 convertible
1997-2003 E39 BMW 528i 530i 540i M5
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

Genuine BMW Steel Rear Sway Bar Bracket Upgrade Pair - E39

T#:348199

Part#: 33506779734KT

In Stock

$ 23.99

This product was last offered at the strikethrough price on
08-25-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

The aluminum sway bar brackets on the rear of E39 models have a tendancy to snap. It's not a widespread problem but we have seen it a few times, on stock and upgraded sway bars. The stock bracket is soft aluminum and as it flexes it can snap. These upgraded bushing brackets are from the E38 7-series (and others) and are much stronger - and cheaper! - than E39 brackets. They are a direct replacement with the original hardware, however, upgraded urethane bushings may need some material trimmed away to fit better. Price is for the pair of steel brackets.

Show More Show Less

Genuine BMW Rear sub frame bushing stop - E39

T#:60002

Part#: 33311093936

Ships in 2 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Stopper
This item fits the following BMW Chassis:
E39 M5,E39

Genuine BMW Bump Stop Support

T#:21791

Part#: 31321139423

In Stock

$ 31.50 USD

Add to Wish List

Qty

$ 31.50 USD

Add to Wish List

Genuine BMW SUPPORT

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Genuine BMW Rear Lower Spring Pad - E64 E63 E60 E39

T#:13517

Part#: 33532229913

Ships in 2 Business Days

$ 33.19 USD

Add to Wish List

Qty

$ 33.19 USD

Add to Wish List

GENUINE BMW SPRING PAD LOWER:339999

Front Upper And Lower Spring Pads (2 X 31331096664 + 2 X 31331091867)...

T#:340759

Part#: 31331096664KT

In Stock

$ 51.08 USD

Add to Wish List

Qty

$ 51.08 USD

Add to Wish List

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

For vehicles with a production date 1996-1997

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

Front Differential Bushing - Priced Each

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:362591

Part#: 33171090389

Ships in 1 Business Day

$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Bilstein B8 Performance Plus FRONT Strut - E39 525i,528i,530i 1997-20...

Vehicles with production date up to 10/1999 will need spring pads 31331096664

10X Entries Into Our F80 M3 Sweepstakes

T#:1962

Part#: VE3-B407-H1

Ships in 1 Business Day

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Position: Front, Left or Right
Setting: Performance Plus for lowered suspensions

Front Bilstein B8 Performance Plus shock. Performance Plus shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Performance Plus shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This Bilstein Performance Plus Front shock fits the following BMWs:
1997-2003 E39 525i, 528i, 530i
1997-2003 E39 525i Wagon, 528i Wagon, 530i Wagon

Show More Show Less

Rear Bump Stop - E39 540i M-Sport II, E39 M5

For vehicles with M-Sport II suspension

T#:61088

Part#: 33532228904

Ships in 1 day

3% off MSRP $ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

Qty

3% off MSRP

$ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD

Add to Wish List

This is the rear bump stop used in the E39 M5 and 2003 E39 540i M-Sport. There are a lot of bump stops for the E39 models and this one is one of the stiffest. Therefore it's a good fit for cars that have been lowered. However, cutting may be required on modified E39s to get the shock travel correct.

Sold each.

This item is the original part used in the following BMWs:
2003 E39 BMW 540i M-Sport II
2000-2003 E39 BMW M5

Show More Show Less

Rear Upper Spring Pad - E39 M5

T#:61091

Part#: 33532229858

In Stock

Sale - Save 8% $ 49.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.94 USD

Add to Wish List

Qty

Sale - Save 8%

$ 49.67

This product was last offered at the strikethrough price on
08-26-2026

$ 45.94 USD

Add to Wish List

This part insulates the spring from the car's body. Replace your worn, torn, dry-rotted, or missing spring pad when replacing shocks, struts, and springs.

Genuine BMW Spring Pad Upper
This item fits the following BMW Chassis:
E39 M5,E39

Show More Show Less

Genuine BMW Front Upper Spring Perch

T#:12711

Part#: 31326769667

In Stock

6% off MSRP $ 48.49

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.55 USD

Add to Wish List

Qty

6% off MSRP

$ 48.49

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.55 USD

Add to Wish List

GENUINE BMW UPPER SPRING POCKET WITH SPA:313570

Genuine BMW Rear Sway Bar End Link - E39

T#:360898

Part#: 33551095532

Ships in 2 Business Days

Sale - Save 7% $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.00 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 7%

$ 66.99

This product was last offered at the strikethrough price on
08-03-2026

$ 62.00 USD

Limited Qty Sale

Add to Wish List

Front Upper Strut Mount - E39 540i M5 and Z8

We Price Match - Give Us A Call or Chat!

T#:2148

Part#: 31331091708

In Stock

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This front shock tower bearing fits BMW E39 540i M5 and Z8.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

This item fits the following BMWs:
1997-2003 E39 BMW 540i M5
1997-2003 E39 BMW 528i 530i - only for cars with EDC - electronic damping control

E52 BMW Z8 Z8 Alpina

Show More Show Less

Febi Rear Shock Mount - E39

For touring models only

We Price Match - Give Us A Call or Chat!

T#:382113

Part#: 33521093416

Ships in 1 Business Day

$ 55.99

This product was last offered at the strikethrough price on
04-22-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

To be replaced when servicing rear shocks

Bilstein B6 Performance Rear Shock - E39 Wagon - not for Self Levelin...

10X Entries Into Our F80 M3 Sweepstakes

T#:1959

Part#: BE5-6061-H1

In Stock

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Position: Rear, left or right
Setting: Performance, for stock suspensions

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein B6 Performance rear shock fits the following BMWs:
1997-2003 E39 525i Wagon, 528i Wagon, 530i Wagon, 540i Wagon - not for cars with Self Leveling Suspension

Show More Show Less

Genuine BMW Hex Bolt With Washer - 33176760336

T#:59645

Part#: 33176760336

In Stock

7% off MSRP $ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Qty

7% off MSRP

$ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Genuine BMW HEX BOLT WITH WASHER

Rein Rear Sway Bar End Link - E39

2X Entries Into Our F80 M3 Sweepstakes

T#:592454

Part#: 33551095532

In Stock

Sale - Save 5% $ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Two per vehicle, replaceable individually.

Genuine BMW Sway Bar Bushing - E39 M5, E39 540i

Only for use with M5 sway bar

T#:15524

Part#: 31352229544

Ships in 1 day

5% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Qty

5% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Genuine BMW Stabilizer Rubber Mounting - D=27mm
This item fits the following BMW Chassis:
E39 M5,E39

Bilstein B6 Performance FRONT Strut - E39 540i 1997-2003

10X Entries Into Our F80 M3 Sweepstakes

T#:2037

Part#: VE3-B408-H1

In Stock

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Position: Front, left or right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
1997-2003 E39 540i
1997-2003 E39 540i Wagon

Show More Show Less

Front Sway Bar Link for E39 M5 and 540i

We Price Match - Give Us A Call or Chat!

T#:5238

Part#: 31351095664

Ships in 1 day

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

The front sway bar links are known to fail on the E39 5 Series V8 models (540i and M5). Early sway bar link failures produce clunking noises and vibration, while more serious failure will leave the front sway bar disconnected and cause serious handling issues. This is a replacement sway bar end link for the 1997-2003 BMW 540i and 2000-2003 BMW M5 (all V8 models).

This swaybar link fits the following BMW:
1997-2003 E39 540i sedan / wagon
2000-2003 E39 M5 sedan

Show More Show Less

Meyle Rear Guide Link - E38 E39

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:362102

Part#: 33326768791

In Stock

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

This is a new rear guide link with a new balljoint and rubber bushing.

Bilstein B8 Performance Plus Rear Shock - E39 525i,528i,530i,540i 199...

10X Entries Into Our F80 M3 Sweepstakes

T#:1958

Part#: BE5-2829

In Stock

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Position: Rear, Left or Right
Setting: Sport, for lowered suspensions

Rear Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein Sport Rear Shock fits the following BMWs:
1997-2003 E39 525i, 528i, 530i, 540i
1997-2003 E39 525i Wagon, 528i Wagon, 540i Wagon - Only for cars with Self Leveling Elimination Kit

Show More Show Less

Bilstein B6 Performance Rear Shock - E39 Wagon - only for Self Leveli...

10X Entries Into Our F80 M3 Sweepstakes

T#:1960

Part#: BE5-6096-H0

In Stock

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.

Show More Show Less

B3 Front Coil Spring - Priced Each

For vehicles with standard suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:598641

Part#: 36-129171

In Stock

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

BMW has tuned a comfortable yet performance oriented suspension system across their model offering. The springs used are a very sophisticated design with both tapered wire diameter and progressive spring rates to ensure the best possible ride quality under varying loads and conditions. Due to environmental conditions, the original coating is commonly compromised thus creating a weak point which yields to failure (cracked springs). Replace your cracked springs with replacement parts from Bilstein.

Show More Show Less