Please ensure your correct model is selected
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex BMW E24 / E28 / E32 / E34 / E36 / E39 / E46 / Z3 Rear Sway Bar Bushing – 15 mm is a specialized suspension upgrade designed to improve the performance of your BMW’s rear sway bar system. Engineered for BMW models with a 15 mm rear sway bar, this bushing provides a perfect fit and superior handling.
These 15 mm Rear Sway Bar Bushings are ideal for BMW enthusiasts looking to upgrade their car’s handling dynamics. Whether you're driving a classic BMW like the E24 or a modern model like the E46, these bushings provide a straightforward way to enhance your vehicle's suspension, offering improved cornering precision and reduced body roll, while still preserving ride comfort for everyday use.
Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort.
One item to replace is the control arm. After years of service, the non-serviceable ball joints and other components can begin to wear out. Because some components cannot be replaced, the only solution is replacement of the entire arm.
If replacing any part of your front or rear suspension, it is best to either do it in pairs (both left and right sides), or examine parts that are prone to failure. This will provide the most service life out of replacement parts and assure they are all performing properly.
Referred to as a wishbone by BMW.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1996 - 2004 E39 Sedan 540i
1998 - 2004 E39 M5
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2002 - 2008 E85 Z4 Roadster Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster
2006 - 2008 E86 Z4 3.0si Z4 M Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.
With this kit, you can expect an average lowering of:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This product was last offered at the strikethrough price on
03-09-2026
This product was last offered at the strikethrough price on
03-09-2026
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
1998 - 2004 E39 M5
1998 - 2004 E39 Touring 525i 528i 540i
1996 - 2004 E39 Sedan 525i 528i 530i 540i
2001 - 2006 E46 M3
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 320i 323i 325i 328i 330i
2002 - 2006 E46 Sedan 320i 325i 325xi 330i 330xi
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The Powerflex Rear Lower Arm Rear Bushing for the BMW E60 5 Series, E63 6 Series, E53 X5, and E39 5 Series, designed for a 14mm fitting, is a performance-oriented upgrade that enhances the functionality of the rear suspension system. By replacing the stock rubber bushings with high-quality polyurethane, this bushing offers multiple advantages for improved handling and stability.
Improved Handling Dynamics: The firmer polyurethane construction reduces flex and unwanted movement in the rear lower arm, resulting in enhanced cornering stability and overall handling. This upgrade helps drivers feel more in control during aggressive driving and tight turns.
Superior Durability: Unlike traditional rubber bushings that can wear out and degrade over time, Powerflex bushings are designed to withstand harsh conditions. They resist damage from oil, heat, and road debris, ensuring consistent performance and longevity.
Enhanced Steering Feedback: By minimizing unwanted movement within the rear suspension, these bushings provide better road feedback and improved steering response. This results in a more connected and engaging driving experience, allowing drivers to feel more attuned to their vehicle.
Easy Installation: Specifically designed for the E60, E63, E53, and E39 models, these bushings are a direct fit into the existing suspension components. The installation process is straightforward, requiring no modifications and making it an ideal upgrade for DIY enthusiasts.
Versatile Performance: Whether for daily driving or performance-oriented applications, these bushings help optimize the rear suspension geometry, enhancing tire contact with the road and improving handling capabilities in various driving conditions.
This upgrade is ideal for BMW owners looking to enhance their vehicle's rear suspension performance. The Powerflex Rear Lower Arm Rear Bushing for the 14mm fitting is a reliable solution for improving handling, stability, and overall driving enjoyment, making it suitable for both everyday use and spirited driving scenarios.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This product was last offered at the strikethrough price on
05-04-2026
Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This is the OEM Front Left Lower Control Arm for E39 BMW 525i 528i 530i 1997-2003.
This item fits the following BMWs:
1997-2003 E39 5 Series BMW 525i 528i 530i & Wagons
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This 27mm sway bar bushing is ideal for enthusiasts looking to improve the handling characteristics of their BMW, offering a durable, performance-focused upgrade that enhances vehicle control without compromising daily driving comfort.
Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.
Kit Features:
Powerflex Front Sway Bar Bushing (24mm) designed for the BMW E38 7 Series and E39 5 Series:
These bushings are perfect for those wanting to upgrade their suspension setup for better handling and longevity.
This product was last offered at the strikethrough price on
06-08-2026
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.
This Level 1 kit replaces:
Front Control Arms - Curved & Straight
All New Hardware
The Powerflex Non-M Rear Lower Arm Rear Bushing for the BMW E39 5 Series, specifically designed for a 12mm fitting, is an excellent performance enhancement for the vehicle's rear suspension system. By replacing the factory rubber bushings with high-performance polyurethane, this bushing offers numerous advantages for improved handling and stability.
Enhanced Suspension Performance: The stiffer polyurethane material reduces flex and unwanted movement in the rear lower arm, resulting in improved handling characteristics. This upgrade enhances cornering stability, allowing for more confident driving, especially in dynamic situations.
Long-lasting Durability: Unlike factory rubber bushings, which can deteriorate over time, these polyurethane bushings are engineered to withstand extreme conditions. They resist wear from oil, heat, and road debris, ensuring long-lasting performance and reliability.
Improved Driver Feedback: The firmer bushing design allows for better road feel and steering response, giving drivers a more connected experience with the vehicle. This leads to enhanced control during cornering and a more engaging driving experience.
Simple Installation: Designed for a direct fit into the BMW E39 5 Series lower arm, these bushings require no modifications for installation. This ease of fitment makes it a straightforward upgrade for enthusiasts and DIYers alike.
Versatile Use: Whether for daily driving or spirited performance applications, these bushings help optimize the rear suspension setup, improving tire contact with the road and enhancing overall performance.
This upgrade is ideal for BMW E39 5 Series owners who want to enhance their vehicle's handling capabilities and stability. The Powerflex Non-M Rear Lower Arm Rear Bushing is a reliable choice for improving the performance of the rear suspension system, making it suitable for various driving conditions and styles.
This product was last offered at the strikethrough price on
03-06-2026
This product was last offered at the strikethrough price on
06-08-2026
This product was last offered at the strikethrough price on
06-08-2026
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise free suspension.
This Level 2 kit replaces:
Control Arms
Bushings
Hardware
Outer Tie Rods
Stabilizer End Links
This product was last offered at the strikethrough price on
05-07-2026
These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.
Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
06-30-2026
This product was last offered at the strikethrough price on
06-30-2026
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.
This Level 2 kit replaces:
Front Strut Mounts
Control Arms
Outer Tie Rods
Sway Bar End Links
The Powerflex BMW E39 5 Series Rear Lower Arm Front Bushing is designed to improve the performance and durability of the suspension system by replacing the factory-installed rubber bushings with high-performance polyurethane. This bushing fits into the front position of the rear lower control arm, offering enhanced handling and stability for the BMW E39 5 Series.
This Rear Lower Arm Front Bushing is an ideal choice for BMW E39 5 Series owners looking to enhance their car’s handling and stability. It delivers improved control and a more responsive driving experience, all while retaining the comfort expected from the E39. Perfect for daily use and performance applications alike, it provides a robust solution for better suspension performance and long-term durability.
This product was last offered at the strikethrough price on
07-01-2026
|
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This rear sway bar is the perfect upgrade for your Non-M E39 BMW. Taken from the M5, this sway bar features a larger 16.5mm diameter for increased stiffness and reduced body roll.
Required M5 parts for Non-M installation:
Genuine BMW Stabilizer, Rear - D=16,5mm
This item fits the following BMW Chassis:
E39 M5,E39
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
