BMW E39 M62 4" Silicone Intake Boot is engineered to enhance air flow and performance compared to the factory corrugated rubber boot. Designed by Turner Motorsport, this intake boot features smooth contours and stepped flanges to ensure a seamless transition from the air box to the throttle body. The single-piece construction simplifies installation, offering a straightforward replacement for the stock two-piece design.

• Improved Air Flow: Smooth contours enhance air flow compared to the OE corrugated rubber boot.
• Seamless Transition: Stepped flanges maintain a smooth internal diameter transition.
• Simplified Installation: One-piece design makes installation quick and easy.
• Durable Construction: Made from 5-ply reinforced silicone for enhanced durability and performance.
• Enhanced Resistance: Offers reduced thermal conductivity and superior resistance to ozone and UV degradation.

The stock rubber intake boot often fails due to its accordion section, leading to vacuum leaks, rough idle, and increased fuel consumption. Upgrading to the Turner Motorsport silicone intake boot will eliminate these issues and improve overall performance.

NOTE: This boot is a direct fit for the M62Tu (9/1998+). It will fit the non-TU (pre-9/1998) models with a slight relocation of the MAF sensor.

Experience the Eventuri S62 Carbon Fiber Plenum Lid

Introducing Eventuri's S62 Carbon Fiber Plenum Lid, a true masterpiece meticulously crafted from 100% prepreg carbon fiber. This plenum lid seamlessly replaces the standard plastic version, elevating the acoustic signature of the BMW S62 V8 engine. Although it doesn't provide a performance boost, it revolutionizes the auditory thrill of driving the M5/Z8, introducing a fresh dimension to the driving experience.

The resulting sound profile is a symphony of automotive excellence, featuring a deep, resonant tone at low RPMs that gradually ascends in pitch as acceleration intensifies. As you reach higher RPMs, this plenum lid imparts a sound reminiscent of the iconic CSL, creating an intoxicating driving experience. Eventuri's journey involved experimenting with different carbon thicknesses to fine-tune the sound, resulting in a plenum lid that not only increases volume but also produces a melodious induction sound.

Please note that this product does not include the M-Badge or M-Power Strip.

Maxiumum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This part fits the following BMWs:
1996 - 2004 E39 Sedan 530i 

Click here for installation instructions.

AFE Summer Rebate Form

"Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This aFe Intake kit fits the following BMWs:

E39 5 series: BMW 525i 528i 1997-2003

Clickhere for installation instructions.

Boost airflow and unleash a deeper induction sound to rekindle the excitement of driving your BMW E39 530i.

The Luft-Technik Intake System from ECS Tuning is purpose-built for M54-powered 530i models, offering a performance upgrade that overcomes the restrictive factory airbox while maintaining a precise, factory-like fit. ECS Tuning engineered this system around the unique mounting geometry of the E39 chassis, ensuring an effortless bolt-on installation that integrates seamlessly with OEM components.

This performance intake features a high-flow conical air filter housed in a powder-coated aluminum heat shield, designed to seal against the hood and make full use of the factory inlet ducting. By drawing in cooler outside air, the system helps reduce intake temperatures for denser combustion and improved efficiency. A reinforced silicone intake elbow and a precision-engineered MAF housing keep the stock sensor in its proper location while smoothing airflow and reducing turbulence.

The results are immediately noticeable: quicker throttle response, a throatier intake growl, and a cleaner, performance-focused look under the hood. Built with premium materials such as stainless-steel hardware and heat-resistant silicone, ECS Tuning’s Luft-Technik Intake delivers both durability and long-term performance.

For BMW E39 530i drivers who want OE-level fitment with the benefits of sharper response, enhanced induction noise, and improved airflow, the Luft-Technik Intake by ECS Tuning is a must-have upgrade.

Key features:

21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted air flow for maximum induction noise.
The heat shield is designed to fit the E39 chassis perfectly, utilizing factory mounting locations, and creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains factory MAF
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:

Specifically engineered to work with utilizing that maximum air space and retaining the OEM cold air inlet. Mounts to the factory frame rail, no modification required.

Tailored to the M54B30 found in the 5-series chassis.

Kit Contents:

Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
Hi-flow ECS Conical Air Filter
E39 Specific Heat Shield Mount
Hardware for installation
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.

Transform the character of your E39 with the Luft-Technik Intake System from ECS Tuning.

ECS Tuning developed this intake with a focus on the E39's unique design challenges, particularly its one-of-a-kind factory airbox mount. By engineering a system specifically for this chassis, ECS ensures a precise, bolt-on fit that feels OEM while unlocking airflow the stock system leaves on the table.

At the core of the Luft-Technik system is a high-flow conical filter housed within a powder-coated aluminum heat shield, designed to seal against the hood and isolate the filter from engine bay heat. The result is a colder, denser air charge for improved combustion efficiency. A reinforced silicone intake elbow and precision-machined MAF housing maintain factory functionality while reducing turbulence, delivering smoother airflow straight into the engine.

The benefits are immediate: faster throttle response, a noticeable bump in induction volume, and a cleaner, more performance-oriented look under the hood. Pairing factory-style mounting points with premium materials like stainless-steel hardware, ECS created a system that not only performs but is built to withstand years of spirited driving.

For enthusiasts who want their inline-six to breathe freely and sound the part, the Luft-Technik Intake by ECS Tuning combines OE-level fitment with true performance engineering.

Key Features:

21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted airflow for maximum induction noise.
Retains full ASC function—no modifications needed.
Heat shield designed specifically for the E39, utilizing factory mounting locations to create a colder air pocket where the OEM inlet duct feeds.
5052 powder-coated aluminum heat shield for stiffness, corrosion resistance, and durability in demanding environments.
Black silicone intake elbow and coupler are compliant, high-temperature resistant, and designed to grip clamps securely through repeated heat cycles.
Retains the stock 3.0" MAF with no adapters required.
Designed to preserve the stock ICV hose.
Stainless-steel hardware included for long-term durability.
Fitment & Compatibility:

Tailored to the OBD2 M52B28 with ASC found in the BMW E39 528i.
Mounts directly to the factory frame rail with no modification required.
Designed to maximize available air space while retaining the OEM cold air inlet.
Kit Contents:

Heat Shield
Silicone ASC Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
High-Flow ECS Conical Air Filter
E39-Specific Heat Shield Mount
Complete Installation Hardware

Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.