BMW Brakes & Brake Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Some of the most critical components of your BMW are those of the brake system. Whether you are performing maintenance on your daily driver or stocking up on performance brakes for race season, keeping your brakes in working order is paramount to enjoying your car. At Turner Motorsport, we have everything you need to replace or upgrade your brake pads, brake rotors, brake lines, and brake fluid. Choose from our excellent selection of brake components to keep your BMW stopping confidently.

Sub-Categories

Sort By:

Turner Stainless Steel Brake Lines - E30 Front / E60 Rear
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:582987
Part#: 022745TMS01
In Stock
Sale - Save 20% $ 99.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.99 USD
Free Shipping
Sale - Save 20%
$ 99.99

This product was last offered at the strikethrough price on
06-14-2026

$ 79.99 USD
Free Shipping

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less
Turner Motorsport - Corporate Logo
T#:8933505
Part#: 013313LA01KT
Ships on Nov 3, 2026
Sale - Save 25% $ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD
Free Shipping
Sale - Save 25%
$ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD
Free Shipping
Our Performance Parking Brake Actuator improves the ratio of your actuator from 3:1 to 4:1, which provides better clamp load on the parking brake shoes and increases the longevity of your parking brake system! Plus, if you are into drifty things, this will give you a little better control over your parking brake. Not only does our 4130 Chromoly steel zinc-coated parking brake actuator improve the overall parking brake feel, but it also creates less stress on your parking cables. This is the perfect upgrade for your parking brake system whether you are currently replacing components, or just looking to improve the longevity of your existing system.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:583495
Part#: 028598TMS09
In Stock
Sale - Save 15% $ 223.99

This product was last offered at the strikethrough price on
06-14-2026

$ 190.38 USD
Free Shipping
Sale - Save 15%
$ 223.99

This product was last offered at the strikethrough price on
06-14-2026

$ 190.38 USD
Free Shipping

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport - Corporate Logo
T#:583496
Part#: 028598TMS10
In Stock
Sale - Save 15% $ 212.99

This product was last offered at the strikethrough price on
06-14-2026

$ 181.03 USD
Free Shipping
Sale - Save 15%
$ 212.99

This product was last offered at the strikethrough price on
06-14-2026

$ 181.03 USD
Free Shipping

Turner has developed a proprietary new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport - Corporate Logo
T#:582996
Part#: 028598TMS02
In Stock
Sale - Save 19% $ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 19%
$ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.99 USD
Limited Qty Sale
Free Shipping

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less
Turner Front Stainless Steel Brake Lines - E60/E61
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:582995
Part#: 028598TMS01
In Stock
Sale - Save 10% $ 123.99

This product was last offered at the strikethrough price on
06-14-2026

$ 111.59 USD
Free Shipping
Sale - Save 10%
$ 123.99

This product was last offered at the strikethrough price on
06-14-2026

$ 111.59 USD
Free Shipping

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Complete Front & Rear Brake Package - E60 530i 2004-2007
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338761
Part#: TMS2977
Ships on Nov 16, 2026
$ 699.99

This product was last offered at the strikethrough price on
08-19-2026

Starting at $ 690.92 USD
Free Shipping
Starting at $ 690.92 USD
Free Shipping
This brake package for the 2004-2007 BMW E60 530i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Original BMW replacements, Brembo, German OEM, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - OEM street pads, Hawk Performance street pads
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide


Applications:
2004-2005 E60 530i sedan (M54 engine)
2006-2007 E60 530i sedan (N52 engine)
Show More Show Less
Complete Front & Rear Brake Package - E60 528i 2008-2010
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338759
Part#: TMS2972
Ships on Nov 16, 2026
$ 656.99

This product was last offered at the strikethrough price on
08-19-2026

Starting at $ 647.92 USD
Free Shipping
Starting at $ 647.92 USD
Free Shipping
This brake package for the 2008-2010 BMW E60 528i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Original BMW replacements, Brembo, German OEM, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - OEM street pads, Hawk Performance street pads
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide


Applications:
2008-2010 E60 528i sedan
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338783
Part#: TMS2962
Back Ordered
Sale - Save 2% $ 716.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 705.50 USD
Free Shipping
Sale - Save 2%
$ 716.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 705.50 USD
Free Shipping
This brake package for the BMW E60 Xi AWD models comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Genuine BMW replacement, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - OEM street pads, Hawk Performance street pads
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide


Applications:
2006-2007 E60 525Xi sedan
2006-2007 E60 530Xi sedan
2008-2010 E60 528Xi sedan
2008-2010 E60 535Xi sedan
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338768
Part#: TMS2964
Ships in 1-2 days
$ 696.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 585.06 USD
Free Shipping
Starting at $ 585.06 USD
Free Shipping
This brake package for the 2004-later BMW E60 545i and 550i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Original BMW replacements, German OEM, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - OEM street pads, Hawk Performance street pads
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide


Applications:
2004-2005 E60 545i sedan
2006-2010 E60 550i sedan
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:26504945
Part#: 007237SCH01A02KT
In Stock
Sale - Save 17% $ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD
Free Shipping
Sale - Save 17%
$ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD
Free Shipping

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Holds a full 3-Liters (3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

  • Do not exceed 20 PSI
  • LIFETIME REPLACEMENT


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
ECS Performance Caliper Guide Bushing Set - Most Models
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:362994
Part#: 003326ECS01
In Stock
Sale - Save 25% $ 169.99

This product was last offered at the strikethrough price on
06-13-2026

$ 127.49 USD
Free Shipping
Sale - Save 25%
$ 169.99

This product was last offered at the strikethrough price on
06-13-2026

$ 127.49 USD
Free Shipping

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

Show More Show Less


Akebono - Corporate Logo
T#:377514
Part#: EUR919KT
In Stock
$ 227.99

This product was last offered at the strikethrough price on
07-15-2026

$ 198.99 USD
Free Shipping
$ 198.99 USD
Free Shipping

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

 

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

  • Reduced Heat Absorption
  • Reduced Brake Fade
  • Reduced Stopping Distances
  • Significantly Less Brake Dust
  • Increased Brake Rotor Life


This item fits the following BMWs:

2004-2010 E60 BMW 535i 545i 550i 

2004-2010 E63 BMW 645ci 650i

2002-2008 E65 BMW 745i/li 750i/li 760i/li

2008-2013 E9X BMW M3

Show More Show Less
Akebono - Corporate Logo
T#:361315
Part#: EUR918
In Stock
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

 

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

  • Reduced Heat Absorption
  • Reduced Brake Fade
  • Reduced Stopping Distances
  • Significantly Less Brake Dust
  • Increased Brake Rotor Life


This item fits the following BMWs:

2007-2013 E9X BMW 335i/is/xdrive/d

2004-2010 E60 E61 BMW 525i/xi 528i/xi 530i/xi 535i/xi 545i 550i 

2004-2010 E63 E64 BMW 645ci 650i

2002-2008 E65 E66 BMW 745i/li 750i/li 760i/li

2011 E82 BMW 1M Coupe 

2011-2016 Z4 BMW sDrive

2012-2015 E84 BMW X1 x35i

Show More Show Less
Hawk - Corporate Logo
T#:206113
Part#: TMS206113
In Stock
$ 210.99

This product was last offered at the strikethrough price on
09-14-2026

$ 210.59 USD
Free Shipping
$ 210.59 USD
Free Shipping
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don�t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
  • Better stopping power even when the pads are cold
  • Good initial bite (more than on Hawk HPS)
  • Excellent resistance to fade during street use
  • Moderate dust during normal street driving
  • Quiet operation
  • Easy on rotors

This pad set includes pads for both FRONT brakes.

Applications:
2011+ E82 BMW 1M Coupe
2008-2011 E9X BMW 328i, 328Xi,/b>
2007-2011 E9X BMW 335i, 335Xi, 335d
2008-2011 E9X BMW M3
2004-2005 E60 BMW 525i (automatic transmission only)
2006-2007 E60 BMW 525i, 525xi (all transmissions)
2008-2010 E60 BMW 528i, 528xi
2004-2007 E60 BMW 530i, 530xi
2008-2010 E60 BMW 535i, 535xi
2004-2010 E60 BMW 545i, 550i
2004-2010 E63 BMW 645Ci, 650Ci
2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
Show More Show Less

ECS - Corporate Logo
T#:363468
Part#: 003326ECS02
In Stock
$ 200.99 USD
Free Shipping
$ 200.99 USD
Free Shipping

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For front calipers on E90/2 and E60. For rear calipers and all caliper on other models, click here. 

Show More Show Less

Front RedStuff Performance Brake Pads
For vehicle with automatic transmission
2X Entries Into Our F80 M3 Sweepstakes
EBC - Corporate Logo
T#:369762
Part#: DP31449C
Ships in 1 Business Day
5% off MSRP $ 221.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 210.99 USD
Free Shipping
5% off MSRP
$ 221.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 210.99 USD
Free Shipping
EBC Redstuff brake pads are designed for high performance models that are driven aggressively on the street. Featuring a low dusting compound, that offers stopping power even when your brake discs are cold. This material is a Kevlar fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Show More Show Less
Brembo Front Brake Pads set - E60, E61, E65, E66, E90, E92, E93 ...
Up to the 2006 model year Automatic transmissions only
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:581141
Part#: 34116794915
Ships in 6 Business Days
$ 56.99 USD
Free Shipping
$ 56.99 USD
Free Shipping
Brembo brake pads are the result of years of experience and collaboration with the world's leading carmakers. Specifically designed for the North American market, these Brembo replacement pads offer a terrific combination of performance, comfort, reliability, and longevity. Ceramic material provides better braking performance, minimized noise, and a noticeable reduction in brake dust. OE equivalent friction formulations are specifically engineered to enhance braking power, minimize braking distances and provide quiet, safe braking in all road conditions. Brembo pads are thermal scorched to minimize break in period and reduce fading. Direct molding pressing guarantees maximum product accuracy Underlayer provides noise dampening and reduces heat transfer to the caliper. Brembo multi-layer ESE shim ( Elastomer-Steel-Elastomer ) minimizes vibrations and noise. Brembo pads and shoes are homologated in compliance with ECE-R90 legislation and are marked accordingly for easy identification. Includes brake sensor wire.
Show More Show Less

Akebono - Corporate Logo
T#:361003
Part#: EUR683
In Stock
$ 95.99

This product was last offered at the strikethrough price on
06-23-2026

$ 81.99 USD
Free Shipping
$ 81.99 USD
Free Shipping

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

 

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

  • Reduced Heat Absorption
  • Reduced Brake Fade
  • Reduced Stopping Distances
  • Significantly Less Brake Dust
  • Increased Brake Rotor Life


This item fits the following BMWs:

2001-2006 E46 BMW 330i/ci/ci M3

2000-2003 E39 BMW M5

2007 E60 BMW 525i

1995-2001 E38 BMW 740i/iL 750iL

2000-2003 Z8 BMW

2006-2008 E85 BMW Z4

2000-2006 E53 BMW X5

2004-2010 E83 BMW X3

Show More Show Less
Brembo DOT 5.1 Brake Fluid - 1 Liter
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:396547
Part#: L05010
In Stock
$ 20.99 USD
Free Shipping
$ 20.99 USD
Free Shipping
Synthetic DOT 4 brake fluid.
Boiling Point - Dry: 500 Degrees Fahrenheit / Wet: 356 Degrees Fahrenheit.
Specially formulated to work with DOT 4 required braking systems.

EBC Rear Brake Pad Set - RedStuff Performance
2X Entries Into Our F80 M3 Sweepstakes
EBC - Corporate Logo
T#:369772
Part#: DP31451C
Ships in 10 Business Days
5% off MSRP $ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD
Free Shipping
5% off MSRP
$ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD
Free Shipping
EBC Redstuff brake pads are designed for high performance models that are driven aggressively on the street. Featuring a low dusting compound, that offers stopping power even when your brake discs are cold. EBC Redstuff pads are comprised of a ceramic particle-enhanced Kevlar-fiber based braking compound. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, brakes better and is overall quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their brake rotor. This is a truly impressive fast road pad for repeated heavy braking.
Show More Show Less

Akebono - Corporate Logo
T#:361246
Part#: EUR919
In Stock
$ 115.99

This product was last offered at the strikethrough price on
07-15-2026

$ 86.99 USD
Free Shipping
$ 86.99 USD
Free Shipping

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

 

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

  • Reduced Heat Absorption
  • Reduced Brake Fade
  • Reduced Stopping Distances
  • Significantly Less Brake Dust
  • Increased Brake Rotor Life


This item fits the following BMWs:

2004-2010 E60 BMW M5 535I 545I 550I

2004-2010 E63 BMW 645CI 650I M6

2002-2015 E65 F01 BMW 745i/Li 750i/Li 760i/Li

2008-2013 E93 BMW M3

2007+ E70 F15 BMW X5

2008+ E71 F16 BMW X6

Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580333
Part#: B8800001
Ships on Oct 20, 2026
Sale - Save 15% $ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD
Free Shipping
Sale - Save 15%
$ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD
Free Shipping
Change your oil without getting underneath the vehicle! This oil extractor pulls the oil out of your engine through the dip stick tube.
ECS Tuning Exact-Fit Stainless Steel Brake Lines - (Front) E30 RWD, (...
Replaces the Rear brake lines
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:555399
Part#: 025319ECS01
In Stock
Sale - Save 25% $ 90.99

This product was last offered at the strikethrough price on
06-14-2026

$ 68.24 USD
Free Shipping
Sale - Save 25%
$ 90.99

This product was last offered at the strikethrough price on
06-14-2026

$ 68.24 USD
Free Shipping
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
Show More Show Less


Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - Ferodo F...
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:387834
Part#: 107864516
In Stock
$ 325.00 USD
Free Shipping
$ 325.00 USD
Free Shipping
These are the standard Brembo street pads used for the Brembo F40/F50/B/H/GT1 4-piston caliper, made by Ferodo. These are an excellent street pad with many positive attributes for daily driving - low noise, excellent initial bite and modulation.
Show More Show Less
Pagid Racing - Corporate Logo
T#:553320
Part#: 805329
Ships on Jan 15, 2027
$ 442.99 USD
Free Shipping
$ 442.99 USD
Free Shipping

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

Applications:
2011+ E82 BMW 1M Coupe
2004-2005 E60 525i (automatic transmission only)
2006-2007 E60 525i, 525xi (all transmissions)
2008-2010 E60 528i, 528xi
2004-2007 E60 530i, 530xi
2008-2010 E60 535i, 535xi
2004-2010 E60 545i, 550i
2004-2010 E63 645Ci, 650Ci
2002-2008 E65 745i, 745Li, 750i, 750Li, 760Li
2007-2013 E9X 335i, 335Xi, 335d
2008-2013 E9X M3

Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401440
Part#: IRPHB-4S
In Stock
$ 254.99 USD
Free Shipping
$ 254.99 USD
Free Shipping
Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.
Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:26504984
Part#: 011885SCH01A02KT
In Stock
Sale - Save 25% $ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD
Free Shipping
Sale - Save 25%
$ 144.99

This product was last offered at the strikethrough price on
07-31-2026

$ 108.74 USD
Free Shipping

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

  • Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
  • Organized Efficiency: Integrated hose storage streamlines your extraction process.
  • Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
  • Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
  • LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!


ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Hawk - Corporate Logo
T#:5982
Part#: TMS5982
In Stock at Vendor
$ 221.99 USD
Free Shipping
$ 221.99 USD
Free Shipping
A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don�t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:
  • Increased stopping power even when the pads are cold
  • Longer pad life
  • Low dust compared with other performance pads
  • Quiet operation
In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.

This pad set includes pads for both FRONT brakes.

FRONT Brake Pad Applications:
2006-2010 E60 BMW M5
2006-2011 E63 E64 BMW M6
Show More Show Less
Hawk - Corporate Logo
T#:386573
Part#: HB630B.626
Ships in 7 Business Days
$ 206.99 USD
Free Shipping
$ 206.99 USD
Free Shipping

A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:

  • Better stopping power even when the pads are cold
  • Good initial bite (more than on Hawk HPS)
  • Excellent resistance to fade during street use
  • Moderate dust during normal street driving
  • Quiet operation
  • Easy on rotors

Fits the following BMWs:
E60 E63 E64 E65 E66 E82 E9X E71

Show More Show Less

Hawk - Corporate Logo
T#:206116
Part#: TMS206116
Back Ordered
$ 165.99 USD
Free Shipping
$ 165.99 USD
Free Shipping
A high-performance street pad with much-improved braking performance and without the levels of dust from a factory pad. The Street 5.0 pads are perfect for drivers who don’t want an ordinary replacement pad and want something that will hold up during aggressive street driving. The Street 5.0 pads are similar to the established Hawk HPS pads but with more initial bite. While the HPS pads fill the need of a direct replacement OEM-type pad, the Street 5.0 kicks braking performance into the next gear. With the Street 5.0 pads you can expect:
  • Better stopping power even when the pads are cold
  • Good initial bite (more than on Hawk HPS)
  • Excellent resistance to fade during street use
  • Moderate dust during normal street driving
  • Quiet operation
  • Easy on rotors

This pad set includes pads for both REAR brakes.

REAR Brake Pad Applications:
2001-2006 E46 BMW 330i 330Ci 330Xi
2001-2006 E46 BMW M3
1999-2004 E39 BMW M5
2007 E60 BMW 525i
1995-2001 E38 BMW 740i, 740i Sport, 740iL
2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
1999-2006 E53 BMW X5 3.0i, X5 4.4i
2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
2000-2003 E52 BMW Z8 Roadster
Show More Show Less
Front Brake Pads YellowStuff Performance
2X Entries Into Our F80 M3 Sweepstakes
2X Entries For Our Spin To Win Sweepstakes!
EBC - Corporate Logo
T#:369770
Part#: DP41449R
Ships in 1 Business Day
5% off MSRP $ 221.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 210.05 USD
Free Shipping
5% off MSRP
$ 221.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 210.05 USD
Free Shipping
EBC Yellowstuff brake pads are designed for high friction and strong stopping power, with good heat resistance for heavy braking. In 2021, the formulation was updated to remove copper for environmental compliance, resulting in a longer lifespan but also a longer bedding-in period. As a result, Yellowstuff is no longer recommended for track use and is best suited for high-performance street driving and heavy-duty applications such as towing with trucks and SUVs. For track day use, EBC now recommends Bluestuff pads, which offer quicker bed-in times and better performance in racing conditions while remaining street-friendly.
Show More Show Less

Pagid Racing - Corporate Logo
T#:553309
Part#: 8053RSL1
Ships in 7 Business Days
$ 487.99 USD
Free Shipping
$ 487.99 USD
Free Shipping

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2004-2005 E60 BMW 525i (automatic transmission only)
2006-2007 E60 BMW 525i, 525xi (all transmissions)
2008-2010 E60 BMW 528i, 528xi
2004-2007 E60 BMW 530i, 530xi
2008-2010 E60 BMW 535i, 535xi
2004-2010 E60 BMW 545i, 550i
2004-2010 E63 BMW 645Ci, 650Ci
2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
2007-2013 E9X BMW 335i, 335Xi, 335d
2008-2013 E9X BMW M3

Show More Show Less

ECS - Corporate Logo
T#:369358
Part#: E60/63/6434
In Stock
Sale - Save 10% $ 182.99

This product was last offered at the strikethrough price on
06-13-2026

$ 164.69 USD
Free Shipping
Sale - Save 10%
$ 182.99

This product was last offered at the strikethrough price on
06-13-2026

$ 164.69 USD
Free Shipping
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
Show More Show Less
Brembo Rear Brake Pads set - E60, E63, E64, E66, E70, E71
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:581139
Part#: 34216768471
In Stock
$ 86.99

This product was last offered at the strikethrough price on
08-10-2026

$ 61.99 USD
Free Shipping
$ 61.99 USD
Free Shipping
Brembo brake pads are the result of years of experience and collaboration with the world's leading carmakers. Specifically designed for the North American market, these Brembo replacement pads offer a terrific combination of performance, comfort, reliability, and longevity. Ceramic material provides better braking performance, minimized noise, and a noticeable reduction in brake dust. OE equivalent friction formulations are specifically engineered to enhance braking power, minimize braking distances and provide quiet, safe braking in all road conditions. Brembo pads are thermal scorched to minimize break in period and reduce fading. Direct molding pressing guarantees maximum product accuracy Underlayer provides noise dampening and reduces heat transfer to the caliper. Brembo multi-layer ESE shim ( Elastomer-Steel-Elastomer ) minimizes vibrations and noise. Brembo pads and shoes are homologated in compliance with ECE-R90 legislation and are marked accordingly for easy identification. We highly recommend you replace the brake sensor wire with the pads to ensure proper operation of your brake pad thickness warning light system.
Show More Show Less
Pagid Racing - Corporate Logo
T#:553615
Part#: 801919
In Stock
$ 649.99 USD
Free Shipping
$ 649.99 USD
Free Shipping

RSL19 A favorite of BMW's Motorsport engineers, the Pagid RSL19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers. 

This is the set of FRONT pads.

This item fits the following BMWs:
2004-2011 E60 BMW M5
2006-2012 E63/64 BMW M6

Show More Show Less


Hawk - Corporate Logo
T#:4745
Part#: TMS4745
Ships on Oct 21, 2026
$ 307.99 USD
Free Shipping
$ 307.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Featuring:
  • High Intial Bite
  • Consistent torque over all pressures
  • Operating Range:400-1600�F; 204-871�C
  • High Temp & High Torque
  • Provides Superior Pad and Disc Wear
  • Excellent Torque Control
  • Excellent Modulation and Release Characteristics
  • Designed for High Deceleration Rates.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2007-2010 E9X BMW 335i, 335Xi, 335d
    2008-2011 E9X BMW M3
    2004-2005 E60 BMW 525i (automatic transmission only)
    2006-2007 E60 BMW 525i, 525xi (all transmissions)
    2008-2010 E60 BMW 528i, 528xi
    2004-2007 E60 BMW 530i, 530xi
    2008-2010 E60 BMW 535i, 535xi
    2004-2010 E60 BMW 545i, 550i
    2004-2010 E63 BMW 645Ci, 650Ci
    2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
  • Show More Show Less
    Hawk - Corporate Logo
    T#:16529
    Part#: TMS16529
    Ships in 2 Business Days
    $ 359.99 USD
    Free Shipping
    $ 359.99 USD
    Free Shipping
    The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
    Show More Show Less
    Hawk - Corporate Logo
    T#:2017
    Part#: TMS2017
    In Stock at Vendor
    $ 195.99 USD
    Free Shipping
    $ 195.99 USD
    Free Shipping
    A high-performance street pad with much-improved braking performance and significantly reduced brake dust. The HPS pads are perfect for drivers who don�t want an ordinary replacement pad and want something that will hold up for aggressive street. With the HPS pads you can expect:
    • Increased stopping power even when the pads are cold
    • Longer pad life
    • Low dust compared with other performance pads
    • Quiet operation
    In addition, the HPS pads are easy on rotors. And Hawk stands behind their pads with a limited lifetime warranty against defects.

    This pad set includes pads for both FRONT brakes.

    Applications:
    2011+ E82 BMW 1M Coupe
    2008-2011 E9X BMW 328i, 328Xi,/b>
    2007-2011 E9X BMW 335i, 335Xi, 335d
    2008-2011 E9X BMW M3
    2004-2005 E60 BMW 525i (automatic transmission only)
    2006-2007 E60 BMW 525i, 525xi (all transmissions)
    2008-2010 E60 BMW 528i, 528xi
    2004-2007 E60 BMW 530i, 530xi
    2008-2010 E60 BMW 535i, 535xi
    2004-2010 E60 BMW 545i, 550i
    2004-2010 E63 BMW 645Ci, 650Ci
    2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
    Show More Show Less

    Hawk - Corporate Logo
    T#:2001
    Part#: TMS2001
    Back Ordered
    $ 235.99 USD
    Free Shipping
    $ 235.99 USD
    Free Shipping
    Hawk's HP Plus pads fill the need for a "dual-purpose" pad - offering acceptable street performance that also holds up well on the racetrack. The beauty of these pads is that you can put them on at home or your shop and use them to drive to and from the track, with a full day of on-track driving in between. While these track pads actually do work on the street, noticeable increases in noise, dust, and brake wear are to be expected. These pads are great for the weekend track junkie who wants exceptional street performance while also having a capable pad on the track. They are excellent for novice and first-time drivers while also being a favorite of instructors too. And they are inexpensive compared to most full race pads.

    These are not all-out racing pads, however, and they work best when used within their temperature range (100-800*F). Higher friction levels and brake temps will increase wear, especially on heavier cars. Brake cooling kits are strongly recommended. If you find these pads are not lasting, or you are exceeding their performance capability, it will be time to step into a full, dedicated track/racing pad.

    These Front Hawk HP Plus Pads fit the following BMWs:
    2011+ E82 BMW 1M Coupe
    2008-2011 E9X BMW 328i, 328Xi,
    2007-2011 E9X BMW 335i, 335Xi, 335d
    2008-2011 E9X BMW M3
    2004-2005 E60 BMW 525i (automatic transmission only)
    2006-2007 E60 BMW 525i, 525xi (all transmissions)
    2008-2010 E60 BMW 528i, 528xi
    2004-2007 E60 BMW 530i, 530xi
    2008-2010 E60 BMW 535i, 535xi
    2004-2010 E60 BMW 545i, 550i
    2004-2010 E63 BMW 645Ci, 650Ci
    2002-2008 E65 BMW 745i, 745Li, 750i, 750Li, 760Li
    Show More Show Less

    Hawk - Corporate Logo
    T#:3721
    Part#: HB141N.650
    Ships on Oct 21, 2026
    $ 221.99 USD
    Free Shipping
    $ 221.99 USD
    Free Shipping
    Hawk HP Plus pads were designed for autocross use and are a great pad when a track pad is needed for light use on the street. It was designed specifically for autocross, Solo II, and driver school events. HP Plus pads feature high friction levels in a broad temperature range, allowing you to use these pads to get to and from the track and still achieve race-level braking performance on the course.
    Show More Show Less
    Ceramic Front Brake Pad Set
    2X Entries Into Our F80 M3 Sweepstakes
    5X Entries For Our G87 M2 Sweepstakes!
    Brembo - Corporate Logo
    T#:8123181
    Part#: 34112284065
    Ships in 1 Business Day
    $ 128.99 USD
    Free Shipping
    $ 128.99 USD
    Free Shipping

    Pagid Racing - Corporate Logo
    T#:553373
    Part#: 802129
    Ships on Oct 23, 2026
    $ 464.99 USD
    Free Shipping
    $ 464.99 USD
    Free Shipping

    The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

    This is the set of Rear pads.

    This item fits the following BMWs:
    2004-2010 E60 BMW 535i 545i 550i M5
    2004-2011 E63 E64 BMW 645ci 650i M6
    2011+ E82 BMW 1M - Coupe
    2008-2013 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible

    Show More Show Less
    Akebono Front Euro Ceramic Brake Pad Set -- E46 E60 Z4
    For vehicles with manual transmission only
    Akebono - Corporate Logo
    T#:361085
    Part#: EUR1061
    In Stock
    $ 97.99 USD
    Free Shipping
    $ 97.99 USD
    Free Shipping

    Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

     

    Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

    • Reduced Heat Absorption
    • Reduced Brake Fade
    • Reduced Stopping Distances
    • Significantly Less Brake Dust
    • Increased Brake Rotor Life


    This item fits the following BMWs:

    2006-2007 E46 BMW 325i/xi 328i/xi 330i/xi

    2004, 2007 E60 BMW 525i

    2009-2016 Z4 BMW

    Show More Show Less

    BMW Rear Brake Pad Set YellowStuff Performance
    2X Entries Into Our F80 M3 Sweepstakes
    2X Entries For Our Spin To Win Sweepstakes!
    EBC - Corporate Logo
    T#:369774
    Part#: DP41451R
    Ships in 1 Business Day
    5% off MSRP $ 193.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 183.99 USD
    Free Shipping
    5% off MSRP
    $ 193.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 183.99 USD
    Free Shipping
    EBC Yellowstuff brake pads are designed for high friction and strong stopping power, with good heat resistance for heavy braking. In 2021, the formulation was updated to remove copper for environmental compliance, resulting in a longer lifespan but also a longer bedding-in period. As a result, Yellowstuff is no longer recommended for track use and is best suited for high-performance street driving and heavy-duty applications such as towing with trucks and SUVs. For track day use, EBC now recommends Bluestuff pads, which offer quicker bed-in times and better performance in racing conditions while remaining street-friendly.
    Show More Show Less

    ECS - Corporate Logo
    T#:380898
    Part#: E6061XISSBLKT
    In Stock
    Sale - Save 10% $ 168.99

    This product was last offered at the strikethrough price on
    06-13-2026

    $ 152.09 USD
    Free Shipping
    Sale - Save 10%
    $ 168.99

    This product was last offered at the strikethrough price on
    06-13-2026

    $ 152.09 USD
    Free Shipping
    ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
    Show More Show Less
    ECS - Corporate Logo
    T#:555498
    Part#: 025382ECS01
    In Stock
    Sale - Save 15% $ 109.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 93.49 USD
    Free Shipping
    Sale - Save 15%
    $ 109.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 93.49 USD
    Free Shipping
    ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
    Show More Show Less
    Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge
    10X Entries Into Our F80 M3 Sweepstakes
    Bav Auto Tools - Corporate Logo
    T#:580425
    Part#: B8800118
    In Stock
    Sale - Save 3% $ 80.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 78.56 USD
    Free Shipping
    Sale - Save 3%
    $ 80.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 78.56 USD
    Free Shipping
    Used to measure the wear on brake discs and ball joints.