BMW Intake Parts for BMW 5 Series E60 (2004-2010)

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This is a high quality replacement OEM VDO Mass Air Sensor for the EVAP system. Ensure everything stays in top shape and functionality by replacing your failed or aging MAF sensor.

OEM replacement for BMW part # 11721438814.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Enhance Turbocharged Performance with TiAL Q Series Blow-Off Valve

Upgrade your turbo or supercharged setup with TiAL's Q Series Blow-Off Valve, offering an impressive 60% increase in airflow compared to its predecessor. Engineered for both durability and enhanced performance, this valve easily bolts onto any standard TiAL flange without welding.

Constructed from CNC-machined 6061 aluminum alloy, this blow-off valve features a large 1.98'' (50.5mm) valve for optimal airflow. The V-Band design aluminum mounting clamp ensures a clean appearance and utilizes stainless steel hardware for long-lasting corrosion resistance.

Key Features & Specifications:

• Suitable for turbocharged and supercharged applications like Paxton and Vortec
• CNC-machined 6061 aluminum alloy construction for durability
• Large 1.98'' (50.5mm) valve for enhanced airflow
• V-Band design aluminum mounting clamp with stainless steel hardware for corrosion resistance
• Viton O-ring valve seal prevents sticking and pulling out
• PTFE-lubricated valve stem and guide with hard anodize coating for wear resistance
• Includes machined aluminum banjo-type air fitting and bolt with an oversized 10mm hose barb for quick actuator response
• High-temp silicone Nomex-reinforced diaphragm for extended lifespan
• Aluminum weld base mounting flange included

This meticulously designed Q Series BOV from TiAL stands as the market's highest flowing blow-off valve. Supporting up to 1,800hp, a single Q BOV demonstrates exceptional high-performance capabilities. Each TiAL Q Series Blow-Off Valve includes the Q Series BOV Assembly, TiAL V-band Clamp, V-band Weld Flange, TiAL Air Fitting, and High-Pressure O-ring.

Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2006-2010 M5 and 2006+ M6. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing cooler, fresh outside air directly into the intake snorkel.

Features:

• Simple, bolt-on installation in minutes
• Increases air flow and velocity through the kidney grilles
• Lowers intake air temperature
• Improves throttle response
• Perfect addition to an aFe Magnum FORCE Stage 2 intake

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

This part fits the following BMWs:
2005 - 2010 E60 M5
 

This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Will not void vehicle warranty

Does not meet CARB emissions standards and cannot be sold to residents of California.

Used in the intake system, this sensor detects boost pressure and protects from over-boost. Replace your faulty sensor with an OEM VDO replacement.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicle's original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!