BMW Intake Parts for BMW 5 Series E60 (2004-2010)

This dual-cone intake for the 135/335/535 is similar to the enclosed carbon fiber intake but without the surrounding air box. If you love the look of the open filters and high-tech carbon fiber, this is the kit for you. High-flow cotton air filters connect to CAD engineered carbon fiber intake tubes for an improvement in air flow. The open filter layout releases more intake roar than the stock muffled intake.

135/335/535 ECS open DCI intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

135/335/535 ECS Carbon intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Dyno proven power and torque gains backed with real-world testing
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

This is the replacement mass air sensor to fit the M54 and N52 engine used in the E9x 325i, 330i, E60 525i 530i and Z4 with N52 engine. This HFM is manufactured by OEM supplier Siemens/VDO and is a direct replacement for the stock HFM. The mass air sensor/meter measures the volume of air being fed into the engine so that the fuel levels can be adjust for optimal performance. A faulty sensor can lead to improper fuel mixture and rough idle and poor performance and gas mileage. Replace your faulty sensor with a high quality OEM VDO sensor to restore normal operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2006-2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006 E91 BMW 325xi - Wagon
2004-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

This filter fits all 545i, 550i, 645i, and 650i produced in 2003, 2004, 2005, 2006, 2007, 2008 and newer (E60, E63 and E64 chassis).

Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.

This part fits the following BMWs:
2003 - 2006 E60 Sedan 525i 530i 

In addition to the weak stock chargepipe, the factory N54 diverter valves can also be a source for boost leaks. The diverter valve takes overboost and re-directs it back through the intake and turbos instead of allowing it to pass into the intake manifold. It's the same as a blow off valve (BOV) but instead of releasing into the engine bay, it stays contained to the engine. The stock diverter valves (DV) are plastic and connect with more plastic into the chargepipe and turbo inlet pipes. The plastic can become brittle and crack even on stock engines and leak boost, which leads to a loss in power and performance.

Turbosmart has developed two kits to replace and upgrade the stock diverter valves - a direct replacement kit (shown) and a combination DV/BOV "Dual Port" kit. This direct replacement kit includes new high-performance DV and stronger silicone hose to connect them to the turbo inlet pipes (Vargas silicone inlets are recommended). The Turbosmart Kompact DV will give you all of the strength and reliability you need to take your turbo build to the next level.

You will also need T#553932 

Unlock the full potential of your E60/E63 M5/M6 with this upgraded intake system from Eventuri, meticulously crafted for peak performance. Engineered with precision and enhanced with years of expertise, the Eventuri intake system boasts a seamless design, integrating the MAF tube into a sleek carbon housing.

• Say goodbye to OEM flexible hoses and hello to custom-made replacements
• Elevate your driving experience with sharpened throttle response
• Increase torque and power
• Enhance driveability
• Indulge in the captivating V10 induction sound

Upgrade your ride today with this Black Carbon Intake System from Eventuri.

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

This filter fits the LEFT SIDE intake airbox on all E60 M5 and E63 M6 (and E64 M6 convertible). Be sure to also get the right side filter, part# 33-2350.