BMW Engine Parts for BMW 5 Series E61 (2006-2010)

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...

T#:599636

Part#: TYPEA4BARADAPTER

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Vacuum Gauge and Fuel Pump Tester

T#:5498468

Part#: 20300

Ships in 2 Business Days

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A must have

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

In Stock

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

OEM Elring Crankcase Gasket Set - BMW E9X E60 F10 N52 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2691335

Part#: 11117548101

Ships in 2 Business Days

$ 181.83 USD

Add to Wish List

Qty

$ 181.83 USD

Add to Wish List

OEM Elring crankcase gasket set for your BMW N52 3.0L engine

Victor Reinz Oil Pan Gasket

T#:373816

Part#: 11137548031

Ships in 2 Business Days

$ 53.99

This product was last offered at the strikethrough price on
05-07-2026

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Gasket between oil pan and engine block

VTT Modular Cast Aluminum CNC Valve Cover Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:586044

Part#: VTTN54CASTVC-1-1

Ships in 10 Business Days

$ 759.99 USD

Add to Wish List

Qty

$ 759.99 USD

Add to Wish List

N54 CHRA Replacement - upgraded td04 thrust assembly - 1/5/Z ...

2X Entries Into Our F80 M3 Sweepstakes

T#:398498

Part#: VTT-N54-CHRA-1-T

Ships in 10 Business Days

$ 808.99 USD

Add to Wish List

Qty

$ 808.99 USD

Add to Wish List

Direct OEM replacements with upgraded TD04 thrust assembly - These are a direct replacement for the factory turbocharger. New or reman bearing housing will be used, reman turbine wheel, reman factory compressor wheel. All brand new internals using the upgraded TD04 thrust assembly.

Show More Show Less

Victor Reinz Cylinder Head Bolts - N54

T#:373825

Part#: 11127574303

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 135.44 USD

Add to Wish List

Qty

$ 135.44 USD

Add to Wish List

Head Bolt set for the N54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Show More Show Less

FrankenTurbo F54 Super-TD04 Twin Turbos - BMW E82 135i, E6X 535i/xi, ...

T#:51391251

Part#: F54TTN54-135

Back Ordered

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The F54 Super-TD04 kit is FrankenTurbo’s "no-compromise" twin-turbo upgrade for N54 owners who want single-turbo power levels with twin-turbo response.

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 2 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

N54B30 32cc Platinum Series Dish Extreme Duty Piston Set

T#:17073600

Part#: 646000CE-6

Back Ordered

8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

M54/S54/N52/N54/N55 IP High Performance Ignition Coil Set

T#:1637696

Part#: IP-A122609

Ships in 5 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Victor Reinz Valve Seal Repair Kit - Exhaust

T#:377137

Part#: 11340035853

Ships in 3 Business Days

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Stop burning oil at start-up

Victor Reinz Cylinder Head Gasket - E60, E61, E71, E82, E88, E90, E92...

1.52mm (+0.30) thickness - for use with a machined head

T#:373831

Part#: 11127557266

Ships on Oct 2, 2026

$ 201.99 USD

Add to Wish List

Qty

$ 201.99 USD

Add to Wish List

.30 thicker than stock

CTA Fuel Injector Tool Kit - N20, N54, N55

T#:584132

Part#: CTA7644

Ships in 6 Business Days

$ 294.23 USD

Add to Wish List

Qty

$ 294.23 USD

Add to Wish List

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less

Conti Tech Rubber High-Pressure Hose

We Price Match - Give Us A Call or Chat!

T#:378830

Part#: N0202811

Ships in 3 Business Days

$ 34.22 USD

Add to Wish List

Qty

$ 34.22 USD

Add to Wish List

7mm O.D X 2.5mm I.D.

E9X/E8X Bucketed Fuel Pump Upgrade - Single Shot

T#:590135

Part#: E90BUCKETSTKSS

Ships in 10 Business Days

$ 551.99 USD

Add to Wish List

Qty

$ 551.99 USD

Add to Wish List

aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine

T#:557623

Part#: 44-LF029-MB

Ships in 3 Business Days

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Billet N54 Valve Cover - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557949

Part#: VTTVCOVBCR

Ships in 10 Business Days

Starting at $ 1,448.99 USD

Add to Wish List

Starting at $ 1,448.99 USD

Add to Wish List

The N54 valve cover, while not a terrible design, has it's share of flaws. Most owners have had to replace this part over time as it can crack for seemingly no reason. Additionally, the stock valve cover has its limitations for vacuum and PCV connectivity.

VTT is proud to offer a ground-up system designed to give the end user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? Now you can run them any way you want! Including complete VTA, oil cap one-way breather, or whatever else you may need. This i a true solution that solves many plumbing headaches.

Accessability options aside, this part looks magnificent. CNC Machined and anodized in your choice or Red, Black, or Clear, this valve cover is sure to turn heads!

Details:

100% CNC 6061-T6 Aircraft aluminum construction
Anodized in a variety of colors
Custom logo available on the cap
Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
Gives the end user true variety for setting up their Valve Cover and PCV System

This part fits the following BMW engines:
2006-2013 N54

Show More Show Less

OEM Bosch Fuel Filter - E60 E61 N52

T#:395288

Part#: 16117373514

Ships in 2 Business Days

$ 146.99

This product was last offered at the strikethrough price on
08-13-2026

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

This OEM fuel filter is a must during any major service or tune-up. With a clogged or dirty filter, you are starving your engine of gasoline which can result in dangerous cutting out, rough running, or even a no-start situation. Bosch filters are premium grade filters that will keep your fuel system in top shape the same as, or better than, Genuine filters, without having to spend the Genuine BMW price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Bosch Fuel Filter - E60, E61

T#:591945

Part#: 16147373523

Ships in 2 Business Days

$ 138.99 USD

Add to Wish List

Qty

$ 138.99 USD

Add to Wish List

Does not include fuel level sensor

VTT CNC ORB Plug - -10AN

2X Entries Into Our F80 M3 Sweepstakes

T#:642075

Part#: VTT-10ORB

Ships in 10 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - ...

T#:21045512

Part#: BDCC-N54-535

Ships on Oct 1, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Oxygen Sensor

T#:596858

Part#: 11787544655

Ships in 2 Business Days

$ 121.02

This product was last offered at the strikethrough price on
04-10-2026

$ 115.68 USD

Add to Wish List

Qty

$ 115.68 USD

Add to Wish List

Bosch In-Tank Fuel Pump - E60, E61

T#:552982

Part#: 16117373503

Ships in 2 Business Days

$ 231.30 USD

Add to Wish List

Qty

$ 231.30 USD

Add to Wish List

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products

Show More Show Less

URO Oil Cooler - Multiple BMWs

2X Entries Into Our F80 M3 Sweepstakes

T#:588783

Part#: 11427525333

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

3 Arm Engine Cylinder Hone - 8"

T#:641408

Part#: 2833D

Ships in 7 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Hone and remove glaze from engine cylinders from 3/4" to 4" and 19mm to 101mm in diameter

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Iwis Timing Chain - E60, E61, E71, E82, E88, E90, E92, E93, F01, F02,...

T#:361321

Part#: 11317516088

Ships on Oct 1, 2026

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Replace your broken or damaged chain

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm

T#:2928972

Part#: 197832225

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
Precision Specifications:
- Bore: 84.50mm
- Stroke: 89.6mm
- Rod: 145.05mm
- CH: 31.7mm
- Piston Style: Dish with 4 valve reliefs
- Crown Volume: 17.2cc
- Piston Mass: 314g
- Pin Diameter: 22mm
- Pin Style: Floating
Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 6 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

Hella Air Horn Kit

T#:592708

Part#: 3001651

Ships in 2 Business Days

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Get noticed with this air horn kit from Hella!

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 7 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM Valeo Alternator - 185 amp

We Price Match - Give Us A Call or Chat!

T#:376244

Part#: 12317525376

Ships in 1 Business Day

$ 730.23

This product was last offered at the strikethrough price on
07-16-2026

$ 677.42 USD

Add to Wish List

Qty

$ 677.42 USD

Add to Wish List

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less

Rein Crankcase Ventilation Hose - E60, E61, E90, E91

2X Entries Into Our F80 M3 Sweepstakes

T#:591594

Part#: 11157567802

Ships in 4 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

From oil separator to oil pan vent tube

URO Belt Tensioner Assembly - E60, E61, E70, E82, E88, E90, E91, E92,...

2X Entries Into Our F80 M3 Sweepstakes

T#:591618

Part#: 11287530314

Ships in 2 Business Days

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Complete tensioner assembly

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Magnetic Pickup Tool

T#:640838

Part#: 1976

Ships in 2 Business Days

$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Vargas Billet Valve Cover And Dual Catch Can Combo Kit - Billet Black...

2X Entries Into Our F80 M3 Sweepstakes

T#:22394048

Part#: VTTN54VCOCCBLK

Ships in 10 Business Days

$ 2,129.99 USD

Add to Wish List

Qty

$ 2,129.99 USD

Add to Wish List

This convenient kit from Vargas includes everything you need, saving you the hassle of sourcing specific fittings for your valve cover-catch can setup. Spend less time searching and more time enjoying your upgraded system!

Show More Show Less

OEM INA Upper Engine Timing Chain Guide - BMw N54 3.0L

T#:42301973

Part#: ZG0158

Ships in 8 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Located at the top of your timing chain system, this slide rail guides your timing chain, preventing rattling and ensuring proper alignment of the timing chain and sprockets. Over time, these rails can wear out, allowing for excessive play in the chain. If left unaddressed, this guide can become brittle, leading to cracking or complete failure.

Show More Show Less

Genuine BMW oil level sensor

T#:40744

Part#: 12617607909

Ships in 1-2 days

8% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

Qty

8% off MSRP

$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

Genuine BMW Oil Levelling Sensor -
This item fits the following BMW Chassis:
E70 X5,E71,E83 X3,F15

Fits BMW Engines including:
N51,N52,N52N,N54,N55,N57N

Show More Show Less

Genuine BMW Fuel Injector - N52 3.0L

T#:19391

Part#: 13537531634

Ships in 1-2 days

3% off MSRP $ 231.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

Qty

3% off MSRP

$ 231.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 223.99 USD

Add to Wish List

Genuine BMW Injection Valve -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Oil Filler Cap - E90 E92 E60 E85 E86

T#:19325

Part#: 11127500568

Ships in 3 Business Days

7% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD

Add to Wish List

Qty

7% off MSRP

$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD

Add to Wish List

This Genuine BMW oil filler cap comes inscribed with "BMW Castrol" and is a direct replacement for many late model BMW's.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci - Only for M56 engine
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2005-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si

Show More Show Less

Genuine BMW Crank shaft main Bearing - lower - N54 3.0L N52 3.0L N55 ...

T#:32664

Part#: 11217627025

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW In-Tank Fuel Pump

T#:177122

Part#: 16117373503

Ships in 1-2 days

6% off MSRP $ 609.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 574.99 USD

Add to Wish List

Qty

6% off MSRP

$ 609.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 574.99 USD

Add to Wish List

Genuine BMW Delivery Unit With In-Tank Pump, Right - 5 Bar

Fits BMW Engines including:
N52,N52N,N62N

Genuine BMW Valve Seal Repair Kit - Exhaust

T#:34285

Part#: 11340035853

In Stock

13% off MSRP $ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Qty

13% off MSRP

$ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Genuine BMW Repair Kit Valve Seal Ring
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 5 Series E61 (2006-2010)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results