BMW Tools & Specialty Equipment for BMW 7 Series E65 (2002-2008)

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

• This specially made socket features 17mm male hex on one end and 17mm socket on the other
• Works to extend reach between wrench and lug nut
• Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Features:

• 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm,
•  15mm, 16mm, 17mm, 18mm, 19mm
• Limited Lifetime Warranty

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

Durable Impact sockets for hard to remove fasteners safely.

Features:

• Brawny ½-inch drive 27mm 12-point socket
• Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
• Accommodating 53mm depth to accommodate many applications and different length shafts.
• Made of durable chrome moly steel, this socket is tough enough to get the job done.

Many BMWs, especially older models, feature pinch welds where the floor pan meets the rocker. These run from wheel-well-to-wheel-well and are an especially appealing jacking location with one shortfall - jacking on an unprotected pinch weld will frequently cause an unsightly bent and damaged weld. This damage is a quick to rust spot, being located on the lowest point of the vehicle and no longer being covered by protective ecoat, paint, or undercoat.

This Schwaben Pinch Weld Protector is designed to fit between any floor jack cradle and bottom of vehicle. It features a specially designed slot to straddle pinch welds, keeping jack from crushing or bending the pinch weld. The bottom side of protector is designed to fit any jack as well as the Schwaben (T#363164) aluminum jack stands. 

Extruded and designed in USA. Pad is 3" wide & 1" tall.

The Schwaben 1/2" Drive Ratchet is a professional-grade tool built for durability and precision. Constructed from high-strength steel with a satin chrome finish, it is designed to resist corrosion and wipe clean easily after use.

The core of this tool is a 72-tooth gear mechanism that requires only 5° of movement to engage the next tooth. This fine-tooth design is critical for working in modern engine bays or tight chassis areas where your range of motion is severely limited.

TECHNICAL SPECIFICATIONS

Drive Size: 1/2" Length: 248mm (9.75") Gear Ratio: 72-tooth mechanism Arc Swing: 5° Material: High-strength alloy steel Finish: Satin Chrome FEATURES

Tight-Access Efficiency - a 5° arc swing allows for consistent bolt movement in cramped quarters where standard ratchets struggle Quick-Release Button - a positive-lock push-button mechanism holds sockets securely during high-torque applications and allows for immediate one-handed removal. Reliable Grip - satin finish provides a secure grip even when hands are oily, offering better control than high-polish alternatives.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome vanadium steel

• E36 3 series (1992-1999) -- no M3
• E46 323/325 (1999-2005) -- no 330/M3

Long Flex Head Ratchet 1/2" Drive offers exceptional performance and durability for automotive and mechanical tasks. Designed with a 72-tooth gear mechanism, this ratchet is perfect for tight spaces where precision is crucial.

• Compact Gear Mechanism: The 72T gear system allows for only 5 degrees of handle movement between gears, making it ideal for working in confined areas.
• Versatile Flex Head: Features 9 detent positions within a 180-degree swing for greater flexibility and accessibility.
• Secure Socket Holding: Push button release ensures the socket remains firmly in place until intentionally released, preventing accidental drops.
• Extended Reach: With a length of 310mm (12.2"), this ratchet provides additional leverage for easier operation.
• Durable Finish: The fine satin finish enhances durability and simplifies cleaning.

This Long Flex Head Ratchet 1/2" Drive is backed by a limited lifetime warranty, ensuring long-term reliability and performance.

A simple design that makes compressing the caliper piston back in a breeze. The days of balancing the piston while turning a C-clamp are over.

Note: Not designed for use with screw-in type brake pistons.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)