Prevent costly oil leaks when installing a new MSL oil cooler from Mosselman. These high-quality rubber gaskets ensure your oil thermostat is sealed properly, guaranteeing peak performance and long service life.

Kit includes:

2x Oil Pressure Hose O-Ring 1x Oil Filter Housing Gasket

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

• Allows hose to run straight down, increasing clearance
• Made of durable 6061-T6 aluminum for long-lasting performance
• Anodized black finish for enhanced durability and corrosion resistance
• Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

Upgrade your cooling system with durable silicone hoses that offer extended life and enhanced heat tolerance. Say goodbye to stock limitations and opt for silicone hoses that retain OEM fitment while overcoming typical OEM hose flaws. These hoses are designed to resist deterioration and softening due to coolant heat cycles, ensuring prolonged longevity compared to traditional rubber hoses.

Specifically, this hose connects from the thermostat housing outlet to the front of the cylinder head. Its features include:

• Inclusive of both upper and lower clamps for easy installation.
• Crafted from 4-Ply reinforced silicone, ensuring superior durability compared to OE rubber hoses that are prone to failure.
• Internal layer lined with Flourosilicone for exceptional chemical resistance.
• Silicone construction provides reduced thermal conductivity, enhanced resistance to ozone, and UV degradation, thereby boosting overall performance and longevity.

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.

• Efficient Cooling: The 10-row design enhances cooling capacity to manage high oil temperatures effectively.
• Durable Construction: Black finish provides durability and resistance to environmental factors.
• Optimized Performance: Helps prevent a drop in oil pressure and maintains proper engine lubrication.
• Versatile Fitment: Universal design suitable for various vehicles and applications.
• Compact Size: Overall dimensions of 12.95" x 3.8" x 1.97" and core dimensions of 11" x 2.76" x 1.97" ensure a good fit in most engine bays.

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

For BMW owners seeking enhanced airflow or tighter engine compartment clearance, Turner Motorsport presents a Universal Fan. Ideal for applications like aftermarket turbo setups, this fan ensures optimal cooling performance. Please note that this fan is universal and may require modification to fit your specific application. Crafted in Italy, this fan boasts dimensions of 16.30in x 15.75in x 3.47in and provides an airflow of 2024 CFM.

• Enhanced airflow for improved engine cooling
• Ideal for applications with tight tolerances, such as aftermarket turbo setups
• Universal design allows for versatile installation
• Crafted in Italy for quality assurance
• Compact size with powerful airflow capacity

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

BMW Silver Auxiliary Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the aesthetics and functionality of their engine bay. Unlike generic aftermarket caps that overlook critical pressure regulation, this precision-engineered cap retains the OEM pressure release functionality, ensuring safe and reliable coolant system performance.

Crafted from high-quality billet aluminum, this reservoir cap offers superior durability and resistance to heat and fluids, preventing warping or degradation over time. Unlike adhesive-based cap covers that can loosen or fall off, this cap is a direct replacement for the factory component, providing a secure, high-performance solution.

• OEM pressure release functionality – Maintains proper system regulation for optimal coolant performance
• Premium billet aluminum construction – Offers enhanced durability and longevity
• Direct replacement design – Secure fit without adhesives or modifications
• Resistant to heat and fluids – Ensures long-lasting reliability in extreme conditions
• Performance-inspired look – Adds a sleek, high-end appearance to your engine bay
• Upgraded durability – Prevents cracking, leaks, and premature wear

Upgrade your BMW’s cooling system with the BMW Silver Auxiliary Coolant Reservoir Cap, blending performance, reliability, and premium styling.

BMW Mishimoto 12" Universal Curved Blade Electrical Fan

The BMW Mishimoto 12" Universal Curved Blade Electrical Fan is an ideal upgrade for enhancing cooling efficiency or addressing fitment issues with aftermarket components. Turner Motorsport offers this fan with a slim profile that allows for easy installation flush against the radiator, ensuring optimal performance and space utilization.

Benefits:

• High-Flow Performance: Delivers 1150 CFM of airflow for superior cooling efficiency.
• Universal Fitment: Designed to fit a wide range of vehicles and applications.
• Compact Design: With a diameter of 12" and an overall thickness of just 2.5", it increases engine bay space and allows for flexible installation.
• Versatile Operation: Easily reversible for use as either a pusher or puller fan.
• Mishimoto Lifetime Warranty: Backed by Mishimoto's lifetime warranty for peace of mind.
• Prop 65 Warning: Note that Proposition 65 may apply to this product. For more information, visit www.P65Warnings.ca.gov.

The perfect upgrade for your connection between your thermostat and cylinder head. Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

Some of the weakest point of the cooling systems in BMW's can come down to the OE plastic fittings breaking down from the constant changes in temperature softening these plastic components. When this happens even simply moving the hose slightly could cause the fitting to crack causing the coolant to leak all over. The ECS design silicone hose with billet aluminum adapter retains OE fitment with superior strength to not only handle the performance, but stand up to the wear and tear of a daily driver.

Features: 

• Manufactured from billet 6061-T6 with type III anodize for exceptional durability and corrosion resistance.

  • Much stronger part than OEM plastic

  • Will not become brittle and fatigue over time due thermal cycling.  This will prevent the part from breaking during removal and re-installation.

• Constructed of 4-Ply reinforced silicone for improved durability over the failure prone OE rubber hose.
• Flourosilicone lined internal layer for exceptional chemical resistance.
• Silicone offers reduced thermal conductivity as well as improved resistance to ozone and UV degradation for improved performance and durability.
• Follows OEM form for perfect fitment.
• Utilizes OEM O-ring 11537545278 to ensure a proper seal.