BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Ziza Sequential LED Turn Signals - Smoked - E8x/E9x
10X Entries Into Our F80 M3 Sweepstakes
Factory Bulb Carriers Required
ZiZa - Corporate Logo
T#:6382177
Part#: 002220LA01-01
In Stock
Sale - Save 10% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.59 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.59 USD
Free Shipping on orders $49 and up
Upgrade your lighting with sequential indicators and smoked lenses
APEX Wheels - Corporate Logo
T#:637384
Part#: APEXM12STDKIT5HX
Ships in 3 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping
ZiZa Platinum White H7 Halogen Bulb - Pair
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:367434
Part#: ZZH7BSPLWA
In Stock
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Enhance Your Vehicle's Visibility with Ziza Platinum White H7 Bulbs

Upgrade your vehicle's lighting and visibility with Ziza Platinum White H7 bulbs. Don't let burnt-out bulbs limit your vision at night. These replacement bulbs emit a cleaner white light, akin to 7500K HID color, in contrast to stock bulbs. With this set of two bulbs, your exterior lights will be properly illuminated, enhancing your ability to see and be seen.

Key Features:

  • Ziza Platinum White H7 replacement bulbs
  • Cleaner white light comparable to 7500K HID color
  • Set includes 2 bulbs for convenience
  • Recommended to replace bulbs in pairs for optimal performance

Ensure your safety and visibility on the road by upgrading to Ziza Platinum White H7 bulbs.

Show More Show Less

AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less

ZiZa Pure Yellow H7 Halogen Bulb - Pair
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:367318
Part#: ZZH7BSPYA
In Stock
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Enhance Nighttime Visibility with Ziza Pure Yellow H7 Bulbs

Experience improved nighttime driving visibility with Ziza Pure Yellow H7 bulbs. Say goodbye to the limitations of burnt-out bulbs and embrace the rich yellow light emitted by these bulbs, which are designed to replace your stock ones. Comparable to 3000K HID color, these bulbs are perfect for enhancing anti-glare visibility in rainy and low-light conditions, ensuring you can see and be seen on the road.

Key Features:

  • Replaces stock bulbs with rich yellow H7 bulbs
  • Enhances anti-glare visibility in low light and rainy conditions
  • Comparable to 3000K HID color for improved lighting
  • Sold as a set of 2 bulbs
  • Ideal for off-road or show use

It's a common occurrence that when one bulb burns out, the other is not far behind. That's why it's recommended to replace bulbs in pairs to ensure your vehicle's exterior lights are consistently lit up. Take a moment to inspect all your lights, and if any others need replacing, make sure they're up to the task.

Please note that these Ziza Pure Yellow H7 bulbs are designed for off-road or show use only.

Show More Show Less
APEX ARC-8 17x9" ET30 Anthracite Concave Wheel 16.55lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180797
Part#: ARC8179ET30AN
In Stock
$ 339.00 USD
$ 339.00 USD
17x9" ET30 Anthracite Concave APEX ARC-8 Wheel 16.55lbs
Wheel Specs
Fitment:Front or Rear
Size:17x9.0"
Offset (mm):30
Weight (lbs):16.55
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Ziza Performance H8 LED Angel Eye Bulb Set - E60/1 E9X E70/1 E82/88 Z...
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with Xenon headlights
ZiZa - Corporate Logo
T#:377732
Part#: 003584ZIZ01A
In Stock
Sale - Save 10% $ 174.99

This product was last offered at the strikethrough price on
05-02-2026

$ 157.49 USD
Free Shipping
Sale - Save 10%
$ 174.99

This product was last offered at the strikethrough price on
05-02-2026

$ 157.49 USD
Free Shipping
Angel eyes are an important aspect in the styling of your BMW, giving it a unique and aggressive appearance. Unfortunately, the halogen bulbs used to illuminate the angel eye rings tend to fade over time, making the rings look dull and yellow. Ziza Performance LED bulbs are the perfect upgrade to not only increase the brightness by 3 times but also give the rings a more crisp, white light and a longer life span. In addition, these bulbs will not give you a bulb out warning, a common problem with poor-quality alternatives. LED angel eye features: 6000K light color Up to 30,000 hour life span OEM installation Error code free Up to 3 times brighter then OEM Fits the following BMWs: 2007-2010 E60/1 BMW LCI vehicles with Xenon Headlights 2009-2012 E90/1 BMW LCI vehicles with Xenon Headlights and all M3's 2007-2010 E92/3 BMW Pre-LCI models with Xenon Headlights and all M3's 2007-2013 E70 BMW with Xenon Headlights 2008-2014 E71 BMW with Xenon Headlights 2007-2013 E82/88 BMW with Xenon Headlights 2009-2016 E89 BMW Z4 with Xenon Headlights 2008-2010 E63/4 BMW LCI vehicles with Xenon Headlights 2013-2015 E84 BMW with Xenon Headlights **This non-DOT approved product is for Off-road/Track use only. Not approved for legal street use**
Show More Show Less
H7 Premium LED Conversion Kit - Series 2
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:39059271
Part#: 003452LB04-05
In Stock
Sale - Save 10% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 82.79 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 82.79 USD
Free Shipping on orders $49 and up

ZiZa Super White H7 Halogen Bulb - Set of Two
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:367433
Part#: ZZH7BSSWA
In Stock
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Don't compromise your nighttime vision due to burnt-out bulbs. Upgrade to the Ziza Super White H7 bulbs, delivering a cleaner and whiter light output akin to the 6000K HID color temperature, surpassing the performance of stock bulbs. This set includes two replacement bulbs designed to elevate your exterior lighting, enhancing your ability to see and be seen on the road. It's essential to replace bulbs in pairs, as when one fades, the other may follow suit. Take a moment to inspect all your lights to ensure they're in top condition.

Please note: This non-DOT approved product is intended for off-road and track use only. It is not approved for legal street use.

Key Features:

  • Ziza Super White H7 bulbs for enhanced nighttime visibility.
  • Cleaner, white light output comparable to 6000K HID color.
  • Set includes two replacement bulbs for superior exterior lighting.
Show More Show Less

H8 Pure Yellow Bulb - Pair
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:372845
Part#: ZZH8BSPYA
In Stock
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Elevate Your Vehicle's Lighting with Ziza Pure Yellow H8 Bulbs

Upgrade your vehicle's lighting with Ziza Pure Yellow H8 bulbs, meticulously designed to replace your stock bulbs. These bulbs emit a rich yellow light, effectively improving anti-glare visibility in challenging weather conditions such as rain and low-light situations.

Ziza, a prominent manufacturer and distributor of performance automotive lighting products, proudly presents a new line of products that push the boundaries of automotive lighting.

Key Features:

  • Ziza Pure Yellow H8 replacement bulbs
  • Rich yellow light for enhanced visibility in adverse weather
  • Significantly improves anti-glare performance

Please be aware that this product is specifically intended for off-road and track use and is not approved for legal street use.

Show More Show Less
ZiZa - Corporate Logo
T#:6382176
Part#: 002206LA02-02
In Stock
Sale - Save 10% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.39 USD
Free Shipping
Sale - Save 10%
$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.39 USD
Free Shipping
Upgrade your lighting with sequential indicators, smoked lenses and gloss black trim
Prosport Performance - Corporate Logo
T#:385019
Part#: HEA-WRAPKIT-50
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Show More Show Less


H11 Pure Yellow Bulb - Pair
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:367317
Part#: ZZH11BSPYA
In Stock
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Elevate your vehicle's lighting game with Ziza Hi-Performance Yellow Bulbs. These bulbs are meticulously coated to emit a captivating and functional yellow glow that not only adds a touch of style but also substantially improves anti-glare visibility, especially in challenging conditions like rain and low light situations.

Important Note: These bulbs are designed for off-road or show use only.

Show More Show Less
APEX ARC-8 18x9.5" ET35 Satin Black Concave Wheel 18.85lbs
Front Fitment Note: 5-8mm spacer is recommended
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180712
Part#: ARC81895ET35SMBK
Ships in 9 Business Days
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x9.5" ET35 Satin Black Concave APEX ARC-8 Wheel 18.85lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.85
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX ARC-8 17x9" ET30 Hyper Black Concave Wheel 16.55lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180796
Part#: ARC8179ET30HBK
Ships in 3 Business Days
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
17x9" ET30 Hyper Black Concave APEX ARC-8 Wheel 16.55lbs
Wheel Specs
Fitment:Front or Rear
Size:17x9.0"
Offset (mm):30
Weight (lbs):16.55
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Prosport Performance - Corporate Logo
T#:385025
Part#: HEA-WRAPKIT-25
Ships in 2 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

  • 2" wide x 1/16" thick
  • Durable, tightly woven, 100% fiberglass
  • Reduce under hood temperatures
  • Protect other engine components
  • Protect your hands/arms from burns
  • Each roll comes with 5 FREE, 14" long stainless steel zip ties
Show More Show Less

Prosport Performance - Corporate Logo
T#:385020
Part#: HEA-GWRAP-15
Back Ordered
$ 33.99 USD
Free Shipping on orders $49 and up
Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.
Show More Show Less
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

APEX Wheels - Corporate Logo
T#:180751
Part#: EC71885ET45RS
Ships in 6 Business Days
$ 389.00 USD
Free Shipping
$ 389.00 USD
Free Shipping
18x8.5" ET45 Race Silver APEX EC-7 Wheel 19.55lbs
Wheel Specs
Fitment:Front or Rear
Size:18x8.5"
Offset (mm):47
Weight (lbs):19.55
Profile:1, minimal dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:180705
Part#: ARC81810ET25HBK
Ships on Nov 17, 2026
$ 419.00 USD
Free Shipping
$ 419.00 USD
Free Shipping
18x10" ET25 Hyper Black Concave APEX ARC-8 Wheel 19.95lbs
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Race Silver Wheel 19.2lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:342500
Part#: ARC81895ET22RS
Back Ordered
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping

Silver 18x9.5" ET22 Concave APEX ARC-8 Wheel.

Wheel Specs

Fitment:Rear

Size:18x9.5"

Offset (mm):22

Weight (lbs):19.2

Profile:Concave

 

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Prosport Performance - Corporate Logo
T#:31390598
Part#: PSTOP270-12
In Stock at Vendor
$ 45.00 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

  • Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
  • Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
  • White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
  • Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
  • Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.
Show More Show Less
APEX ARC-8 18x8.5" ET45 Wheel - Satin Black
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180775
Part#: ARC81885ET45SMBK
Ships in 4 Business Days
$ 379.00 USD
Free Shipping
$ 379.00 USD
Free Shipping
Wheel Specifications Style: ARC-8 Size: 18x8.5" Offset (mm): ET45 Color: Satin Black APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! Price is per wheel.
Show More Show Less
APEX ARC-8 18x9.5" ET35 Anthracite Concave Wheel 18.85lbs
Front Fitment Note: 5-8mm spacer is recommended
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180765
Part#: ARC81895ET35AN
Ships in 6 Business Days
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x9.5" ET35 Anthracite Concave APEX ARC-8 Wheel 18.85lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.85
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


APEX Wheels - Corporate Logo
T#:180704
Part#: ARC81810ET25SMBK
Ships in 3 Business Days
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
18x10" ET25 Satin Black Concave APEX ARC-8 Wheel 19.95lbs
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
HB4/9006 Super White Halogen Bulb - Pair
10X Entries Into Our F80 M3 Sweepstakes
ZiZa - Corporate Logo
T#:367436
Part#: ZZ9006BSSWA
Ships on Oct 26, 2026
Sale - Save 10% $ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 29.99

This product was last offered at the strikethrough price on
05-02-2026

$ 26.99 USD
Free Shipping on orders $49 and up

Elevate your vehicle's lighting with Ziza Super White 9006 bulbs, ideal replacements for your stock bulbs. These bulbs emit a color reminiscent of HID headlights, providing a significant improvement in both aesthetics and lighting performance when compared to standard stock bulbs.

As a trusted manufacturer and distributor of high-performance automotive lighting products, Ziza is at the forefront of innovative solutions to enhance your vehicle's lighting experience.

Important Note: These bulbs are designated for off-road use only.

Show More Show Less
18x10.5" ET22 Brushed Clear APEX VS-5RS Forged BMW Wheel
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:4607237
Part#: VS5RS18105ET22BC
Ships in 6 Business Days
Sale - Save 10% $ 799.00

This product was last offered at the strikethrough price on
08-31-2026

$ 719.10 USD
Free Shipping
Sale - Save 10%
$ 799.00

This product was last offered at the strikethrough price on
08-31-2026

$ 719.10 USD
Free Shipping

Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less

APEX ARC-8 18x9.0" ET30 Satin Black Wheel 18.05lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:390690
Part#: ARC8189ET30SMBK
Ships on Sep 21, 2026
$ 389.00 USD
Free Shipping
$ 389.00 USD
Free Shipping

18x9.5" ET35 Anthracite APEX EC-7 BMW Wheel
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180732
Part#: EC71895ET35AN
In Stock
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
18x9.5" ET35 Anthracite APEX EC-7 Wheel 21.70lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):21.7
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:180708
Part#: ARC81895ET22SMBK
In Stock
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x9.5" ET22 Satin Black Concave APEX ARC-8 Wheel 19.2lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):22
Weight (lbs):19.2
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Anthracite Concave Wheel 19.2lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180710
Part#: ARC81895ET22AN
In Stock
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
18x9.5" ET22 Anthracite Concave APEX ARC-8 Wheel 19.2lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):22
Weight (lbs):19.2
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18x9" ET30 Anthracite APEX EC-7RS Forged Wheel
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:11170593
Part#: EC7RS189ET30AN
Ships in 6 Business Days
$ 709.00 USD
Free Shipping
$ 709.00 USD
Free Shipping
APEX Wheels - Corporate Logo
T#:180709
Part#: ARC81895ET22HBK
Ships in 6 Business Days
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
18x9.5" ET22 Hyper Black Concave APEX ARC-8 Wheel 19.2lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):22
Weight (lbs):19.2
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x10.5" ET22 Silver Wheel 23.9lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201375
Part#: EC719105ET22RS
Ships in 6 Business Days
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


18x9.5" ET35 Satin Black APEX VS-5RS Forged BMW Wheel
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:4607225
Part#: VS5RS1895ET35SMB
Ships in 6 Business Days
Sale - Save 10% $ 739.00

This product was last offered at the strikethrough price on
08-31-2026

$ 665.10 USD
Free Shipping
Sale - Save 10%
$ 739.00

This product was last offered at the strikethrough price on
08-31-2026

$ 665.10 USD
Free Shipping
Spec-D Tuning - Corporate Logo
T#:20946739
Part#: 2LHPE8708TM
Ships in 7 Business Days
$ 322.99 USD
$ 322.99 USD
Features Include: Brand new in original box New Euro-style LED strips for the European look! Matte Black Housing - Clear lens dual halo projector headlights with LED light strip Made by an ISO-certified manufacturer using materials that meet strict OEM requirements
Show More Show Less
APEX EC-7 19x9.5" ET22 Silver Wheel 22.9lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201363
Part#: EC71995ET22RS
Ships in 6 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
Silver 19x10" ET25 APEX EC-7 Wheel.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and may fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.
Show More Show Less

APEX Wheels - Corporate Logo
T#:180731
Part#: EC71895ET35SMBK
Ships in 6 Business Days
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
18x9.5" ET35 Satin Black APEX EC-7 Wheel 21.70lbs
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):21.7
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 18" Square Wheel Set - Satin Black
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:386606
Part#: EC7181033SB4
Ships in 2 Business Days
$ 1,676.00 USD
Free Shipping
$ 1,676.00 USD
Free Shipping
Specifications: Color - Satin Black Size - 18x10" ET33
APEX ARC-8 18x10" ET25 Race Silver Wheel 19.95lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180707
Part#: ARC81810ET25RS
Ships in 9 Business Days
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
Silver 18x10" ET25 Silver Concave APEX ARC-8 Wheel.
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.
Show More Show Less

APEX ARC-8 19x9.5" ET22 Satin Black Wheel 20.95lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201386
Part#: ARC81995ET22SMBK
Ships on Oct 15, 2026
$ 449.00 USD
$ 449.00 USD
19x9.5" ET22 APEX ARC-8 Wheel 20.95lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):20.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX ARC-8 19x9.5" ET22 Silver Wheel 20.95lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201387
Part#: ARC81995ET22HS
Ships in 6 Business Days
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
Silver 19x9.5" ET22 APEX ARC-8 Wheel.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):20.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit others when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.
Show More Show Less

APEX ARC-8 19x10.5" ET22 Satin Black Wheel 22.95lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201398
Part#: TMS201398
Ships in 6 Business Days
$ 458.00 USD
Free Shipping
$ 458.00 USD
Free Shipping
19x10.5" ET22 APEX ARC-8 Wheel 22.95lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):22.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 17x9.5" ET35 Concave Wheel - Anthracite
Front Fitment Note: 5-8mm wheel spacer recommended
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180793
Part#: ARC81795ET35AN
Ships on Sep 22, 2026
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Wheel Specifications Style: ARC-8 Size: 17x9.5" Offset (mm): ET35 Color: Anthracite APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! Price is per wheel.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 4 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less
APEX ARC-8 19x10" ET25 Silver Wheel 21.95lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201396
Part#: ARC81910ET25HS
Ships in 6 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x10" ET25 APEX ARC-8 Wheel 21.95lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10"
Offset (mm):25
Weight (lbs):21.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


APEX ARC-8 17x9" ET30 Satin Black Concave Wheel 16.55lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180795
Part#: ARC8179ET30SMBK
Ships in 2 Business Days
$ 339.00 USD
$ 339.00 USD
APEX ARC-8 17x9" ET30 Satin Black Concave Wheel 16.55lbs
Wheel Specs
Fitment:Front or Rear
Size:17x9.0"
Offset (mm):30
Weight (lbs):16.55
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX ARC-8 17x9.5" ET35 Concave Wheel - Hyper Black
Front Fitment Note: 5-8mm wheel spacer recommended
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:180792
Part#: ARC81795ET35HBK
Ships in 6 Business Days
$ 359.00 USD
Free Shipping
$ 359.00 USD
Free Shipping
Wheel Specifications Style: ARC-8 Size: 17x9.5" Offset (mm): ET35 Color: Hyper Black APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! Price is per wheel.
Show More Show Less